Released 2024-12-03
STIG ID: ALMA-09-001010 | SRG: SRG-OS-000027-GPOS-00008 | Severity: low | CCI: | Vulnerability Id: V-269102
Operating system management includes the ability to control the number of users and user sessions that use an operating system. Limiting the number of allowed users and sessions per user is helpful in reducing the risks related to denial-of-service (DoS) attacks.
This requirement addresses concurrent sessions for information system accounts and does not address concurrent sessions by single users via multiple system accounts. The maximum number of concurrent sessions should be defined based upon mission needs and the operational environment for each system.
Configure AlmaLinux OS 9 to limit the number of concurrent sessions to "10" for all accounts and/or account types.
Add the following line to the top of the /etc/security/limits.conf or in a ".conf" file defined in /etc/security/limits.d/:
* hard maxlogins 10
Verify AlmaLinux OS 9 limits the number of concurrent sessions to "10" for all accounts and/or account types with the following command:
$ grep -rs maxlogins /etc/security/limits.conf /etc/security/limits.d/*.conf
/etc/security/limits.d/maxlogins.conf:* hard maxlogins 10
This can be set as a global domain (with the * wildcard) but may be set differently for multiple domains.
If the "maxlogins" item is missing, commented out, or the value is set greater than 10, this is a finding.
STIG ID: ALMA-09-001120 | SRG: SRG-OS-000031-GPOS-00012 | Severity: medium | CCI: | Vulnerability Id: V-269103
A session lock is a temporary action taken when a user stops work and moves away from the immediate physical vicinity of the information system but does not log out because of the temporary nature of the absence.
The session lock is implemented at the point where session activity can be determined. The operating system session lock event must include an obfuscation of the display screen so as to prevent other users from reading what was previously displayed.
Publicly viewable images can include static or dynamic images, for example, patterns used with screen savers, photographic images, solid colors, a clock, a battery life indicator, or a blank screen, with the additional caveat that none of the images convey sensitive information.
Configure AlmaLinux OS 9 to initiate a screensaver after a 10-minute period of inactivity for graphical user interfaces.
Create a database to contain the systemwide screensaver settings (if it does not already exist) with the following command:
$ touch /etc/dconf/db/local.d/00-screensaver
Edit /etc/dconf/db/local.d/00-screensaver and add or update the following lines:
[org/gnome/desktop/session]
# Set the lock time out to 900 seconds before the session is considered idle
idle-delay=uint32 900
Update the system databases:
$ dconf update
Note: This requirement assumes the use of the AlmaLinux OS 9 default graphical user interface, the GNOME desktop environment. If the system does not have any graphical user interface installed, this requirement is Not Applicable.
Verify AlmaLinux OS 9 initiates a session lock after a 10-minute period of inactivity for graphical user interfaces with the following command:
$ gsettings get org.gnome.desktop.session idle-delay
uint32 900
If "idle-delay" is set to "0" or a value greater than "900", this is a finding.
STIG ID: ALMA-09-001230 | SRG: SRG-OS-000031-GPOS-00012 | Severity: medium | CCI: | Vulnerability Id: V-269104
Setting the screensaver mode to blank-only conceals the contents of the display from passersby.
Configure AlmaLinux OS 9 to prevent a user from overriding the picture-uri setting for graphical user interfaces.
First, in the file "/etc/dconf/db/local.d/00-security-settings" add or update the following lines:
[org/gnome/desktop/screensaver]
picture-uri=''
Then, prevent user modification by adding the following line to "/etc/dconf/db/local.d/locks/00-security-settings-lock":
/org/gnome/desktop/screensaver/picture-uri
Update the dconf system databases:
$ dconf update
Note: This requirement assumes the use of the AlmaLinux OS 9 default graphical user interface, the GNOME desktop environment. If the system does not have any graphical user interface installed, this requirement is Not Applicable.
To ensure the screensaver is configured to be blank, run the following command:
$ gsettings get org.gnome.desktop.screensaver picture-uri
If properly configured, the output should be "''".
To ensure that users cannot set the screensaver background, run the following:
$ grep picture-uri /etc/dconf/db/local.d/locks/*
If properly configured, the output should be "/org/gnome/desktop/screensaver/picture-uri".
If it is not set or configured properly, this is a finding.
STIG ID: ALMA-09-001340 | SRG: SRG-OS-000031-GPOS-00012 | Severity: medium | CCI: | Vulnerability Id: V-269105
A session lock is a temporary action taken when a user stops work and moves away from the immediate physical vicinity of the information system but does not log out because of the temporary nature of the absence.
The session lock is implemented at the point where session activity can be determined. The operating system session lock event must include an obfuscation of the display screen so as to prevent other users from reading what was previously displayed.
Publicly viewable images can include static or dynamic images, for example, patterns used with screen savers, photographic images, solid colors, a clock, a battery life indicator, or a blank screen, with the additional caveat that none of the images convey sensitive information.
Configure AlmaLinux OS 9 to prevent a user from overriding settings for graphical user interfaces.
Create a database to contain the systemwide screensaver settings (if it does not already exist) with the following command:
Note: The example below is using the database "local" for the system, so if the system is using another database in "/etc/dconf/profile/user", the file should be created under the appropriate subdirectory.
$ touch /etc/dconf/db/local.d/locks/session
Add the following setting to prevent nonprivileged users from modifying it:
/org/gnome/desktop/session/idle-delay
Update the system databases:
$ dconf update
Note: This requirement assumes the use of the AlmaLinux OS 9 default graphical user interface, the GNOME desktop environment. If the system does not have any graphical user interface installed, this requirement is Not Applicable.
Verify AlmaLinux OS 9 prevents a user from overriding settings for graphical user interfaces.
Determine which profile the system database is using with the following command:
$ grep system-db /etc/dconf/profile/user
system-db:local
Check that graphical settings are locked from nonprivileged user modification with the following command:
Note: The example below is using the database "local" for the system, so the path is "/etc/dconf/db/local.d". This path must be modified if a database other than "local" is being used.
$ grep -i idle /etc/dconf/db/local.d/locks/*
/org/gnome/desktop/session/idle-delay
If the command does not return at least the example result, this is a finding.
STIG ID: ALMA-09-001450 | SRG: SRG-OS-000029-GPOS-00010 | Severity: medium | CCI: | Vulnerability Id: V-269106
A session lock is a temporary action taken when a user stops work and moves away from the immediate physical vicinity of the information system but does not want to logout because of the temporary nature of the absence.
Configure AlmaLinux OS 9 to initiate a session lock for graphical user interfaces when a screensaver is activated.
Create a database to contain the systemwide screensaver settings (if it does not already exist) with the following command:
Note: The example below is using the database "local" for the system, so if the system is using another database in "/etc/dconf/profile/user", the file should be created under the appropriate subdirectory.
$ touch /etc/dconf/db/local.d/00-screensaver
[org/gnome/desktop/screensaver]
lock-delay=uint32 5
The "uint32" must be included along with the integer key values as shown.
Update the system databases:
$ dconf update
Note: This requirement assumes the use of the AlmaLinux OS 9 default graphical user interface, the GNOME desktop environment. If the system does not have any graphical user interface installed, this requirement is Not Applicable.
Verify AlmaLinux OS 9 initiates a session lock for graphical user interfaces when the screensaver is activated with the following command:
$ gsettings get org.gnome.desktop.screensaver lock-delay
uint32 5
If the "uint32" setting is not set to "5" or less, or is missing, this is a finding.
STIG ID: ALMA-09-001560 | SRG: SRG-OS-000029-GPOS-00010 | Severity: medium | CCI: | Vulnerability Id: V-269107
A session time-out lock is a temporary action taken when a user stops work and moves away from the immediate physical vicinity of the information system but does not logout because of the temporary nature of the absence. Rather than relying on the user to manually lock their operating system session prior to vacating the vicinity, the GNOME desktop can be configured to identify when a user's session has idled and take action to initiate the session lock. As such, users should not be allowed to change session settings.
Configure AlmaLinux OS 9 to prevent a user from overriding settings for graphical user interfaces.
Create a database to contain the systemwide screensaver settings (if it does not already exist) with the following command:
Note: The example below is using the database "local" for the system, so if the system is using another database in "/etc/dconf/profile/user", the file should be created under the appropriate subdirectory.
$ touch /etc/dconf/db/local.d/locks/session
Add the following setting to prevent nonprivileged users from modifying it:
/org/gnome/desktop/screensaver/lock-delay
Update the system databases:
$ dconf update
Note: This requirement assumes the use of the AlmaLinux OS 9 default graphical user interface, the GNOME desktop environment. If the system does not have any graphical user interface installed, this requirement is Not Applicable.
Verify AlmaLinux OS 9 prevents a user from overriding settings for graphical user interfaces.
Determine which profile the system database is using with the following command:
$ grep system-db /etc/dconf/profile/user
system-db:local
Check that graphical settings are locked from nonprivileged user modification with the following command:
Note: The example below is using the database "local" for the system, so the path is "/etc/dconf/db/local.d". This path must be modified if a database other than "local" is being used.
$ grep -i lock-delay /etc/dconf/db/local.d/locks/*
/etc/dconf/db/local.d/locks/session:/org/gnome/desktop/screensaver/lock-delay
If the command does not return at least the example result, this is a finding.
STIG ID: ALMA-09-001890 | SRG: SRG-OS-000029-GPOS-00010 | Severity: medium | CCI: | Vulnerability Id: V-269108
Terminating an idle interactive command shell user session within a short time period reduces the window of opportunity for unauthorized personnel to take control of it when left unattended in a virtual terminal or physical console.
Declaring $TMOUT as read-only means the user cannot override the setting.
Satisfies: SRG-OS-000029-GPOS-00010, SRG-OS-000281-GPOS-00111, SRG-OS-000163-GPOS-00072
Configure AlmaLinux OS 9 to exit interactive command shell user sessions after 10 minutes of inactivity using the following command:
echo "declare -xr TMOUT=600" > /etc/profile.d/tmout.sh
Verify AlmaLinux OS 9 is configured to exit interactive command shell user sessions after 10 minutes of inactivity or less with the following command:
$ grep TMOUT /etc/profile /etc/profile.d/*.sh
/etc/profile.d/tmout.sh:declare -xr TMOUT=600
If "TMOUT" is not set to "600" or less in a script located in the "/etc/'profile.d/ directory, is missing or is commented out, this is a finding.
STIG ID: ALMA-09-002000 | SRG: SRG-OS-000028-GPOS-00009 | Severity: medium | CCI: | Vulnerability Id: V-269109
A session lock is a temporary action taken when a user stops work and moves away from the immediate physical vicinity of the information system but does not want to log out because of the temporary nature of the absence.
The session lock is implemented at the point where session activity can be determined.
Regardless of where the session lock is determined and implemented, once invoked, the session lock must remain in place until the user re-authenticates. No other activity aside from re-authentication must unlock the system.
Configure AlmaLinux OS 9 to enable a user's session lock until that user re-establishes access using established identification and authentication procedures.
Select or create an authselect profile and incorporate the "with-smartcard-lock-on-removal" feature with the following example:
$ authselect select sssd with-smartcard with-smartcard-lock-on-removal
Alternatively, the dconf settings can be edited in the /etc/dconf/db/* location.
Add or update the [org/gnome/settings-daemon/peripherals/smartcard] section of the /etc/dconf/db/local.d/00-security-settings" database file and add or update the following lines:
[org/gnome/settings-daemon/peripherals/smartcard]
removal-action='lock-screen'
Then update the dconf system databases:
$ dconf update
Note: This requirement assumes the use of the AlmaLinux OS 9 default graphical user interface, the GNOME desktop environment. If the system does not have any graphical user interface installed, this requirement is Not Applicable.
Verify AlmaLinux OS 9 enables a user's session lock until that user re-establishes access using established identification and authentication procedures with the following command:
$ grep -R removal-action= /etc/dconf/db/*
/etc/dconf/db/distro.d/00-security-settings:removal-action='lock-screen'
If the "removal-action='lock-screen'" setting is missing or commented out from the dconf database files, this is a finding.
STIG ID: ALMA-09-002110 | SRG: SRG-OS-000028-GPOS-00009 | Severity: medium | CCI: | Vulnerability Id: V-269110
A session lock is a temporary action taken when a user stops work and moves away from the immediate physical vicinity of the information system but does not want to log out because of the temporary nature of the absence.
The session lock is implemented at the point where session activity can be determined.
Regardless of where the session lock is determined and implemented, once invoked, the session lock must remain in place until the user re-authenticates. No other activity aside from re-authentication must unlock the system.
Add the following line to "/etc/dconf/db/local.d/locks/00-security-settings-lock" to prevent user override of the smart card removal action:
/org/gnome/settings-daemon/peripherals/smartcard/removal-action
Then, update the dconf system databases:
$ dconf update
Verify AlmaLinux OS 9 disables the ability of the user to override the smart card removal action setting.
Note: This requirement assumes the use of the AlmaLinux OS 9 default graphical user interface, the GNOME desktop environment. If the system does not have any graphical user interface installed, this requirement is Not Applicable.
Determine which profile the system database is using with the following command:
$ grep system-db /etc/dconf/profile/user
system-db:local
Check that the removal action setting is locked from nonprivileged user modification with the following command:
Note: The example below is using the database "local" for the system, so the path is "/etc/dconf/db/local.d". This path must be modified if a database other than "local" is being used.
$ grep 'removal-action' /etc/dconf/db/local.d/locks/*
/etc/dconf/db/local.d/locks/00-security-settings-lock:/org/gnome/settings-daemon/peripherals/smartcard/removal-action
If the command does not return at least the example result, this is a finding.
STIG ID: ALMA-09-002770 | SRG: SRG-OS-000032-GPOS-00013 | Severity: medium | CCI: | Vulnerability Id: V-269111
Remote access services, such as those providing remote access to network devices and information systems, which lack automated monitoring capabilities, increase risk, and make remote user access management difficult at best.
Remote access is access to DOD nonpublic information systems by an authorized user (or an information system) communicating through an external, nonorganization-controlled network. Remote access methods include, for example, dial-up, broadband, and wireless.
Automated monitoring of remote access sessions allows organizations to detect cyber attacks and also ensure ongoing compliance with remote access policies by auditing connection activities of remote access capabilities, such as Remote Desktop Protocol (RDP), on a variety of information system components (e.g., servers, workstations, notebook computers, smartphones, and tablets).
SSH provides several logging levels with varying amounts of verbosity. "DEBUG" is specifically not recommended other than strictly for debugging SSH communications since it provides so much data that it is difficult to identify important security information. "INFO" or "VERBOSE" level is the basic level that only records login activity of SSH users. In many situations, such as Incident Response, it is important to determine when a particular user was active on a system. The logout record can eliminate those users who disconnected, which helps narrow the field.
Configure AlmaLinux OS 9 to log SSH connection attempts by running the following command:
$ echo "LogLevel VERBOSE" > /etc/ssh/sshd_config.d/40-loglevel.conf
Verify AlmaLinux OS 9 logs SSH connection attempts and failures to the server.
Check what the SSH daemon's "LogLevel" option is set to with the following command:
$ sshd -T | grep loglevel
loglevel VERBOSE
If a value of "VERBOSE" is not returned, or is commented out, this is a finding.
STIG ID: ALMA-09-002880 | SRG: SRG-OS-000032-GPOS-00013 | Severity: medium | CCI: | Vulnerability Id: V-269112
Remote access services, such as those providing remote access to network devices and information systems, which lack automated monitoring capabilities, increase risk, and make remote user access management difficult at best.
Remote access is access to DOD nonpublic information systems by an authorized user (or an information system) communicating through an external, nonorganization-controlled network. Remote access methods include, for example, dial-up, broadband, and wireless.
Automated monitoring of remote access sessions allows organizations to detect cyber attacks and also ensure ongoing compliance with remote access policies by auditing connection activities of remote access capabilities, such as Remote Desktop Protocol (RDP), on a variety of information system components (e.g., servers, workstations, notebook computers, smartphones, and tablets).
Monitoring of remote access can be used to spot attacks such as brute-force authentication attempts and denial-of-service (DoS) attacks.
Add or update the following line to the "/etc/rsyslog.conf" file or a .conf file within /etc/rsyslog.d/:
auth.*;authpriv.*;daemon.* /var/log/secure
Verify that AlmaLinux OS 9 monitors all remote access methods, by running the following command:
$ grep -rsE '^(auth|authpriv|daemon)\.\*' /etc/rsyslog.conf /etc/rsyslog.d/*.conf
/etc/rsyslog.conf:authpriv.* /var/log/secure
If "auth.*", "authpriv.*" or "daemon.*" are not configured to be logged, this is a finding.
STIG ID: ALMA-09-002990 | SRG: SRG-OS-000250-GPOS-00093 | Severity: medium | CCI: | Vulnerability Id: V-269113
Without cryptographic integrity protections, information can be altered by unauthorized users without detection.
Remote access (e.g., RDP) is access to DOD nonpublic information systems by an authorized user (or an information system) communicating through an external, nonorganization-controlled network. Remote access methods include, for example, dial-up, broadband, and wireless.
Cryptographic mechanisms used for protecting the integrity of information include, for example, signed hash functions using asymmetric cryptography enabling distribution of the public key to verify the hash information while maintaining the confidentiality of the secret key used to generate the hash.
AlmaLinux OS 9 incorporates systemwide crypto policies by default. The SSH configuration file has no effect on the ciphers, MACs, or algorithms unless specifically defined in the /etc/sysconfig/sshd file. The employed algorithms can be viewed in the /etc/crypto-policies/back-ends/opensshserver.config file.
Configure the AlmaLinux OS 9 SSH client to use only ciphers employing FIPS 140-3 approved algorithms by updating the "/etc/crypto-policies/back-ends/openssh.config" file with the following line:
Ciphers [email protected],[email protected],aes256-ctr,aes128-ctr
A reboot is required for the changes to take effect.
Verify the SSH client is configured to use only ciphers employing FIPS 140-3 approved algorithms with the following command:
$ grep -i ciphers /etc/crypto-policies/back-ends/openssh.config
Ciphers [email protected],[email protected],aes256-ctr,aes128-ctr
If the cipher entries in the "openssh.config" file have any ciphers other than "[email protected],[email protected],aes256-ctr,aes128-ctr", the order differs from the example above, they are missing, or commented out, this is a finding.
STIG ID: ALMA-09-003100 | SRG: SRG-OS-000250-GPOS-00093 | Severity: medium | CCI: | Vulnerability Id: V-269114
Without cryptographic integrity protections, information can be altered by unauthorized users without detection.
Remote access (e.g., RDP) is access to DOD nonpublic information systems by an authorized user (or an information system) communicating through an external, nonorganization-controlled network. Remote access methods include, for example, dial-up, broadband, and wireless.
Cryptographic mechanisms used for protecting the integrity of information include, for example, signed hash functions using asymmetric cryptography enabling distribution of the public key to verify the hash information while maintaining the confidentiality of the secret key used to generate the hash.
AlmaLinux OS 9 incorporates systemwide crypto policies by default. The SSH configuration file has no effect on the ciphers, MACs, or algorithms unless specifically defined in the /etc/sysconfig/sshd file. The employed algorithms can be viewed in the /etc/crypto-policies/back-ends/opensshserver.config file.
Configure the AlmaLinux OS 9 SSH daemon to use systemwide crypto policies by running the following commands:
$ sudo dnf reinstall openssh-clients
Verify that systemwide crypto policies are in effect with the following command:
$ sudo grep Include /etc/ssh/sshd_config /etc/ssh/sshd_config.d/*
/etc/ssh/sshd_config:Include /etc/ssh/sshd_config.d/*.conf
/etc/ssh/sshd_config.d/50-redhat.conf:Include /etc/crypto-policies/back-ends/opensshserver.config
If "Include /etc/ssh/sshd_config.d/*.conf" or "Include /etc/crypto-policies/back-ends/opensshserver.config" are not included in the system sshd config or the file "/etc/ssh/sshd_config.d/50-redhat.conf" is missing, this is a finding.
STIG ID: ALMA-09-003210 | SRG: SRG-OS-000250-GPOS-00093 | Severity: medium | CCI: | Vulnerability Id: V-269115
Without cryptographic integrity protections, information can be altered by unauthorized users without detection.
Remote access (e.g., RDP) is access to DOD nonpublic information systems by an authorized user (or an information system) communicating through an external, nonorganization-controlled network. Remote access methods include, for example, dial-up, broadband, and wireless.
Cryptographic mechanisms used for protecting the integrity of information include, for example, signed hash functions using asymmetric cryptography enabling distribution of the public key to verify the hash information while maintaining the confidentiality of the secret key used to generate the hash.
AlmaLinux OS 9 incorporates systemwide crypto policies by default. The SSH configuration file has no effect on the ciphers, MACs, or algorithms unless specifically defined in the /etc/sysconfig/sshd file. The employed algorithms can be viewed in the /etc/crypto-policies/back-ends/opensshserver.config file.
Configure the AlmaLinux OS 9 SSH client to use only MACs employing FIPS 140-3 approved algorithms by updating the "/etc/crypto-policies/back-ends/openssh.config" file with the following line:
MACs [email protected],[email protected],hmac-sha2-512,hmac-sha2-256
A reboot is required for the changes to take effect.
Verify the SSH client is configured to use only ciphers employing FIPS 140-3 approved algorithms with the following command:
$ grep -i macs /etc/crypto-policies/back-ends/openssh.config
MACs [email protected],[email protected],hmac-sha2-512,hmac-sha2-256
If the MACs entries in the "openssh.config" file have any hashes other than "MACs [email protected],[email protected],hmac-sha2-256,hmac-sha2-512", the order differs from the example above, they are missing, or commented out, this is a finding.
STIG ID: ALMA-09-003320 | SRG: SRG-OS-000250-GPOS-00093 | Severity: medium | CCI: | Vulnerability Id: V-269116
Without cryptographic integrity protections, information can be altered by unauthorized users without detection.
Remote access (e.g., RDP) is access to DOD nonpublic information systems by an authorized user (or an information system) communicating through an external, nonorganization-controlled network. Remote access methods include, for example, dial-up, broadband, and wireless.
Cryptographic mechanisms used for protecting the integrity of information include, for example, signed hash functions using asymmetric cryptography enabling distribution of the public key to verify the hash information while maintaining the confidentiality of the secret key used to generate the hash.
Configure the AlmaLinux OS 9 SSH server to use only ciphers employing FIPS 140-3 approved algorithms by updating the "/etc/crypto-policies/back-ends/opensshserver.config" file with the following commands:
Note: Before enabling FIPS mode, ensure that the dracut-fips package is installed on the system.
Enable FIPS mode by updating the system's crypto policy with the following command:
$ sudo update-crypto-policies --set FIPS
Note: If FIPS mode has never been enabled on the system, additional steps will need to be conducted. Refer to vendor documentation.
To manually update the Ciphers in the systemwide SSH configuration, use the following command:
$ sudo sed -i -E '/^Ciphers/s/.*/Ciphers [email protected],[email protected],aes256-ctr,aes128-ctr/' "$(readlink -f /etc/crypto-policies/back-ends/opensshserver.config)"
A reboot is required for the changes to take effect.
Verify the SSH server is configured to use only ciphers employing FIPS 140-3 approved algorithms with the following command:
First, ensure that FIPS mode is enabled with the following command:
$ cat /proc/sys/crypto/fips_enabled
1
If the command does not return a "1", then the systemwide crypto policy is not set to FIPS, and this is a finding.
To verify the Ciphers in the systemwide SSH configuration file, use the following command:
$ sudo grep -i ciphers /etc/crypto-policies/back-ends/opensshserver.config
Ciphers [email protected],[email protected],aes256-ctr,aes128-ctr
If the Ciphers entries in the "opensshserver.config" file have any hashes other than "[email protected],[email protected],aes256-ctr,aes128-ctr", the order differs from the example above, or they are missing or commented out, this is a finding.
STIG ID: ALMA-09-003325 | SRG: SRG-OS-000250-GPOS-00093 | Severity: medium | CCI: | Vulnerability Id: V-269117
Without cryptographic integrity protections provided by FIPS-validated cryptographic algorithms, information can be viewed and altered by unauthorized users without detection.
AlmaLinux OS 9 incorporates systemwide crypto policies by default. The SSH configuration file has no effect on the ciphers, MACs, or algorithms unless specifically defined in the /etc/sysconfig/sshd file. The employed algorithms can be viewed in the /etc/crypto-policies/back-ends/opensshserver.config file.
The system will attempt to use the first algorithm presented by the client that matches the server list. Listing the values "strongest to weakest" is a method to ensure the use of the strongest algorithm available to secure the SSH connection.
Configure the AlmaLinux OS 9 SSH server to use only FIPS 140-3 approved algorithms by updating the "/etc/crypto-policies/back-ends/opensshserver.config" file with the following commands:
Note: Before enabling FIPS mode, ensure that the dracut-fips package is installed on the system.
Enable FIPS mode by updating the system's crypto policy with the following command:
$ sudo update-crypto-policies --set FIPS
Note: If FIPS mode has never been enabled on the system, additional steps will need to be conducted. Refer to vendor documentation.
To manually update the Key Exchange Algorithms in the systemwide SSH configuration, use the following command:
$ sudo sed -i -E '/^KexAlgorithms/s/.*/KexAlgorithms ecdh-sha2-nistp384,ecdh-sha2-nistp256,diffie-hellman-group-exchange-sha256,diffie-hellman-group14-sha256/' "$(readlink -f /etc/crypto-policies/back-ends/opensshserver.config)"
Reboot the system for the changes to take effect.
Verify that the SSH server is configured to use only FIPS 140-3 validated key exchange algorithms:
First, ensure that FIPS mode is enabled with the following command:
$ cat /proc/sys/crypto/fips_enabled
1
If the command does not return a "1", then the systemwide crypto policy is not set to FIPS, and this is a finding.
$ sudo grep -i kexalgorithms /etc/crypto-policies/back-ends/opensshserver.config
KexAlgorithms ecdh-sha2-nistp384,ecdh-sha2-nistp256,diffie-hellman-group-exchange-sha256,diffie-hellman-group14-sha256
If the entries following "KexAlgorithms" have any algorithms defined other than "ecdh-sha2-nistp384,ecdh-sha2-nistp256,diffie-hellman-group-exchange-sha256,diffie-hellman-group14-sha256", appear in different order than shown, or are missing or commented out, this is a finding.
STIG ID: ALMA-09-003430 | SRG: SRG-OS-000250-GPOS-00093 | Severity: medium | CCI: | Vulnerability Id: V-269118
Without cryptographic integrity protections, information can be altered by unauthorized users without detection.
Remote access (e.g., RDP) is access to DOD nonpublic information systems by an authorized user (or an information system) communicating through an external, nonorganization-controlled network. Remote access methods include, for example, dial-up, broadband, and wireless.
Cryptographic mechanisms used for protecting the integrity of information include, for example, signed hash functions using asymmetric cryptography enabling distribution of the public key to verify the hash information while maintaining the confidentiality of the secret key used to generate the hash.
Configure the AlmaLinux OS 9 SSH daemon to use systemwide crypto policies by running the following commands:
$ sudo dnf reinstall openssh-server
Verify that systemwide crypto policies are in effect with the following command:
$ sudo /usr/sbin/sshd -dd 2>&1 | awk '/filename/ {print $4}' | tr -d '\r' | tr '\n' ' ' | xargs sudo grep -iH '^\s*include'
/etc/ssh/sshd_config:Include /etc/ssh/sshd_config.d/*.conf
/etc/ssh/sshd_config.d/50-redhat.conf:Include /etc/crypto-policies/back-ends/opensshserver.config
If "Include /etc/ssh/sshd_config.d/*.conf" or "Include /etc/crypto-policies/back-ends/opensshserver.config" are not included in the system sshd config or the file /etc/ssh/sshd_config.d/50-redhat.conf is missing, this is a finding.
STIG ID: ALMA-09-003540 | SRG: SRG-OS-000250-GPOS-00093 | Severity: medium | CCI: | Vulnerability Id: V-269119
Without cryptographic integrity protections, information can be altered by unauthorized users without detection.
Remote access (e.g., RDP) is access to DOD nonpublic information systems by an authorized user (or an information system) communicating through an external, nonorganization-controlled network. Remote access methods include, for example, dial-up, broadband, and wireless.
Cryptographic mechanisms used for protecting the integrity of information include, for example, signed hash functions using asymmetric cryptography enabling distribution of the public key to verify the hash information while maintaining the confidentiality of the secret key used to generate the hash.
AlmaLinux OS 9 incorporates systemwide crypto policies by default. The SSH configuration file has no effect on the ciphers, MACs, or algorithms unless specifically defined in the /etc/sysconfig/sshd file. The employed algorithms can be viewed in the /etc/crypto-policies/back-ends/opensshserver.config file.
Configure the AlmaLinux OS 9 SSH server to use only MACs employing FIPS 140-3 approved algorithms by updating the "/etc/crypto-policies/back-ends/opensshserver.config" file with the following commands:
Note: Before enabling FIPS mode, ensure that the dracut-fips package is installed on the system.
Enable FIPS mode by updating the system's crypto policy with the following command:
$ sudo update-crypto-policies --set FIPS
Note: If FIPS mode has never been enabled on the system, additional steps will need to be conducted. Refer to vendor documentation.
To manually update the MACs in the systemwide SSH configuration, use the following command:
$ sudo sed -i -E '/^MACs/s/.*/MACs [email protected],[email protected],hmac-sha2-512,hmac-sha2-256/' "$(readlink -f /etc/crypto-policies/back-ends/opensshserver.config)"
A reboot is required for the changes to take effect.
Verify the SSH server is configured to use only MACs employing FIPS 140-3 approved algorithms with the following command:
First, ensure that FIPS mode is enabled with the following command:
$ cat /proc/sys/crypto/fips_enabled
1
If the command does not return a "1", then the systemwide crypto policy is not set to FIPS, and this is a finding.
To verify the MACs in the systemwide SSH configuration file, use the following command:
$ sudo grep -i macs /etc/crypto-policies/back-ends/opensshserver.config
MACs [email protected],[email protected],hmac-sha2-512,hmac-sha2-256
If the MACs entries in the "opensshserver.config" file have any hashes other than "[email protected],[email protected],hmac-sha2-512,hmac-sha2-256", the order differs from the example above, or they are missing or commented out, this is a finding.
STIG ID: ALMA-09-003650 | SRG: SRG-OS-000033-GPOS-00014 | Severity: medium | CCI: | Vulnerability Id: V-269120
Without confidentiality protection mechanisms, unauthorized individuals may gain access to sensitive information via a remote access session.
Remote access is access to DOD nonpublic information systems by an authorized user (or an information system) communicating through an external, nonorganization-controlled network. Remote access methods include, for example, dial-up, broadband, and wireless.
Encryption provides a means to secure the remote connection to prevent unauthorized access to the data traversing the remote access connection (e.g., RDP), thereby providing a degree of confidentiality. The encryption strength of a mechanism is selected based on the security categorization of the information.
Session key regeneration limits the chances of a session key becoming compromised.
Configure AlmaLinux OS 9 to force a frequent session key renegotiation for SSH connections to the server by running the following command:
$ echo "RekeyLimit 1G 1h" > /etc/ssh/sshd_config.d/40-rekeylimit.conf
Verify the SSH server is configured to force frequent session key renegotiation with the following command:
$ sshd -T | grep rekeylimit
rekeylimit 1073741824 3600
If "RekeyLimit" does not have a maximum data amount and maximum time defined, this is a finding.
STIG ID: ALMA-09-003760 | SRG: SRG-OS-000250-GPOS-00093 | Severity: high | CCI: | Vulnerability Id: V-269121
Without cryptographic integrity protections, information can be altered by unauthorized users without detection.
Remote access (e.g., RDP) is access to DOD nonpublic information systems by an authorized user (or an information system) communicating through an external, nonorganization-controlled network. Remote access methods include, for example, dial-up, broadband, and wireless.
Cryptographic mechanisms used for protecting the integrity of information include, for example, signed hash functions using asymmetric cryptography enabling distribution of the public key to verify the hash information while maintaining the confidentiality of the secret key used to generate the hash.
Configure the AlmaLinux OS 9 GnuTLS library to use only NIST-approved encryption with the following steps to enable FIPS mode:
$ fips-mode-setup --enable
A reboot is required for the changes to take effect.
Verify if GnuTLS uses defined DOD-approved TLS Crypto Policy with the following command:
$ update-crypto-policies --show
FIPS
If the system wide crypto policy is not set to "FIPS", this is a finding.
STIG ID: ALMA-09-003870 | SRG: SRG-OS-000033-GPOS-00014 | Severity: medium | CCI: | Vulnerability Id: V-269122
Overriding the system crypto policy makes the behavior of the Libreswan service violate expectations and makes the system configuration more fragmented.
Configure Libreswan to use the systemwide cryptographic policy.
Add the following line to "/etc/ipsec.conf":
include /etc/crypto-policies/back-ends/libreswan.config
Note: If the Libreswan package is not installed, this requirement is Not Applicable.
Verify that the IPsec service uses the system crypto policy with the following command:
$ grep -rE '^include ' /etc/ipsec.conf /etc/ipsec.d/
/etc/ipsec.conf:include /etc/crypto-policies/back-ends/libreswan.config
/etc/ipsec.conf:include /etc/ipsec.d/*.conf
If the IPsec configuration file does not contain "include /etc/crypto-policies/back-ends/libreswan.config", this is a finding.
STIG ID: ALMA-09-003980 | SRG: SRG-OS-000250-GPOS-00093 | Severity: medium | CCI: | Vulnerability Id: V-269123
Without cryptographic integrity protections, information can be altered by unauthorized users without detection.
Remote access (e.g., RDP) is access to DOD nonpublic information systems by an authorized user (or an information system) communicating through an external, nonorganization-controlled network. Remote access methods include, for example, dial-up, broadband, and wireless.
Cryptographic mechanisms used for protecting the integrity of information include, for example, signed hash functions using asymmetric cryptography enabling distribution of the public key to verify the hash information while maintaining the confidentiality of the secret key used to generate the hash.
The employed algorithms can be viewed in the /etc/crypto-policies/back-ends/openssl.config file.
Configure the AlmaLinux OS 9 OpenSSL library to use the system cryptographic policy.
Edit the "/etc/pki/tls/openssl.cnf" and add or modify the following line:
.include = /etc/crypto-policies/back-ends/opensslcnf.config
Verify that AlmaLinux OS 9 OpenSSL library is configured to use only ciphers employing FIPS 140-3 approved algorithms with the following command:
$ grep -i opensslcnf.config /etc/pki/tls/openssl.cnf
.include = /etc/crypto-policies/back-ends/opensslcnf.config
If the "opensslcnf.config" is not defined in the "/etc/pki/tls/openssl.cnf" file, this is a finding.
STIG ID: ALMA-09-004090 | SRG: SRG-OS-000250-GPOS-00093 | Severity: medium | CCI: | Vulnerability Id: V-269124
Without cryptographic integrity protections, information can be altered by unauthorized users without detection.
Remote access (e.g., RDP) is access to DOD nonpublic information systems by an authorized user (or an information system) communicating through an external, nonorganization-controlled network. Remote access methods include, for example, dial-up, broadband, and wireless.
Cryptographic mechanisms used for protecting the integrity of information include, for example, signed hash functions using asymmetric cryptography enabling distribution of the public key to verify the hash information while maintaining the confidentiality of the secret key used to generate the hash.
The employed algorithms can be viewed in the /etc/crypto-policies/back-ends/openssl.config file.
Configure the AlmaLinux OS 9 OpenSSL library to use only DOD-approved TLS encryption by editing the following line in the "/etc/crypto-policies/back-ends/opensslcnf.config" file:
TLS.MinProtocol = TLSv1.2
DTLS.MinProtocol = DTLSv1.2
A reboot is required for the changes to take effect.
Verify that AlmaLinux OS 9 OpenSSL library is configured to use TLS 1.2 encryption or stronger with following command:
$ grep -i minprotocol /etc/crypto-policies/back-ends/opensslcnf.config
TLS.MinProtocol = TLSv1.2
DTLS.MinProtocol = DTLSv1.2
If the "TLS.MinProtocol" is set to anything older than "TLSv1.2" or the "DTLS.MinProtocol" is set to anything older than "DTLSv1.2", this is a finding.
STIG ID: ALMA-09-004310 | SRG: SRG-OS-000033-GPOS-00014 | Severity: high | CCI: | Vulnerability Id: V-269125
FIPS 140-3 validated packages are available from TuxCare.
The TuxCare repositories provide the packages and updates not found in the community repositories.
Satisfies: SRG-OS-000033-GPOS-00014, SRG-OS-000125-GPOS-00065, SRG-OS-000396-GPOS-00176, SRG-OS-000478-GPOS-00223
FIPS-validated packages are available from TuxCare as part of the Enterprise Support for AlmaLinux product line. Access the packages by purchasing an ESU license key.
Configure the operating system to implement FIPS mode with the following commands:
$ dnf install -y https://repo.tuxcare.com/tuxcare/tuxcare-release-latest-9.noarch.rpm
$ tuxctl ---fips --license-key ESU-XXXXXXXXXXXXXXXXXXX
$ dnf -y install openssl-3.0.7-20.el9_2.tuxcare.1 kernel-5.14.0-284.11.1.el9_2.tuxcare.5 gnutls-3.7.6-23.el9_2.tuxcare.3 nettle-3.8-3.el9_2.tuxcare.1 libgcrypt-1.10.0-10.el9_2.tuxcare.3 nss-3.90.0-6.el9_2.tuxcare.1
$ grubby --set-default=/boot/vmlinuz-5.14.0-284.11.1.el9_2.tuxcare.5.$(uname -i)
$ fips-mode-setup --enable
$ reboot
Verify that AlmaLinux OS 9 is using the TuxCare FIPS repositories with the following command:
$ dnf repolist | grep tuxcare
tuxcare-base TuxCare Enterprise Support for AlmaLinux OS 9.2 - Base
tuxcare-esu TuxCare Enterprise Support for AlmaLinux OS 9.2 - ESU
tuxcare-fips TuxCare Enterprise Support for AlmaLinux OS 9.2 - FIPS Compliance Extension
If the 3 tuxcare-* repositories above are not enabled, this is a finding.
STIG ID: ALMA-09-004320 | SRG: SRG-OS-000033-GPOS-00014 | Severity: high | CCI: | Vulnerability Id: V-269126
FIPS 140-3 validated packages are available from TuxCare.
The original community packages must be replaced with the versions that have gone through the CMVP.
Satisfies: SRG-OS-000033-GPOS-00014, SRG-OS-000478-GPOS-00223, SRG-OS-000396-GPOS-00176, SRG-OS-000125-GPOS-00065
Ensure FIPS-validated packages are in use instead of OS defaults using the following commands:
$ dnf -y install openssl-3.0.7-20.el9_2.tuxcare.1 kernel-5.14.0-284.11.1.el9_2.tuxcare.5 gnutls-3.7.6-23.el9_2.tuxcare.3 nettle-3.8-3.el9_2.tuxcare.1 libgcrypt-1.10.0-10.el9_2.tuxcare.3 nss-3.90.0-6.el9_2.tuxcare.1
$ dnf -y upgrade
$ grubby --set-default=/boot/vmlinuz-5.14.0-284.11.1.el9_2.tuxcare.5.$(uname -i)
$ reboot
After rebooting into a FIPS kernel, remove the OS default kernel packages, using for example:
$ dnf remove kernel-5.14.0-284.11.1.el9_2.x86_64 kernel-5.14.0-284.30.1.el9_2.x86_64
$ dnf autoremove
Verify that AlmaLinux OS 9 is using the TuxCare FIPS packages with the following command:
$ rpm -qa | grep -E '^(gnutls|nettle|nss|openssl|libgcrypt|kernel)-[0-9]+' | grep -v tuxcare
If the command returns anything, this is a finding.
STIG ID: ALMA-09-004420 | SRG: SRG-OS-000033-GPOS-00014 | Severity: high | CCI: | Vulnerability Id: V-269127
Without confidentiality protection mechanisms, unauthorized individuals may gain access to sensitive information via a remote access session.
Remote access is access to DOD nonpublic information systems by an authorized user (or an information system) communicating through an external, nonorganization-controlled network. Remote access methods include, for example, dial-up, broadband, and wireless.
Encryption provides a means to secure the remote connection to prevent unauthorized access to the data traversing the remote access connection (e.g., RDP), thereby providing a degree of confidentiality. The encryption strength of a mechanism is selected based on the security categorization of the information.
The operating system must use cryptographic modules that have been validated by NIST's FIPS 140-3 program. Using weak or untested cryptography could compromise the confidentiality and integrity of data at rest and in transit.
Satisfies: SRG-OS-000033-GPOS-00014, SRG-OS-000478-GPOS-00223, SRG-OS-000396-GPOS-00176, SRG-OS-000125-GPOS-00065
FIPS-validated packages are available from TuxCare as part of the Enterprise Support for AlmaLinux product line. You will need to purchase an ESU license key.
Configure the operating system to implement FIPS mode with the following commands:
$ dnf install -y https://repo.tuxcare.com/tuxcare/tuxcare-release-latest-9.noarch.rpm
$ tuxctl ---fips --license-key ESU-XXXXXXXXXXXXXXXXXXX
$ dnf -y install openssl-3.0.7-20.el9_2.tuxcare.1 kernel-5.14.0-284.11.1.el9_2.tuxcare.5 gnutls-3.7.6-23.el9_2.tuxcare.3 nettle-3.8-3.el9_2.tuxcare.1 libgcrypt-1.10.0-10.el9_2.tuxcare.3 nss-3.90.0-6.el9_2.tuxcare.1
$ grubby --set-default=/boot/vmlinuz-5.14.0-284.11.1.el9_2.tuxcare.5.$(uname -i)
$ fips-mode-setup --enable
$ reboot
Verify that AlmaLinux OS 9 is in FIPS mode with the following command:
$ fips-mode-setup --check
FIPS mode is enabled.
If FIPS mode is not enabled, this is a finding.
STIG ID: ALMA-09-004750 | SRG: SRG-OS-000002-GPOS-00002 | Severity: medium | CCI: | Vulnerability Id: V-269128
Temporary accounts are accounts created during a time of need when prompt action requires bypassing the normal account creation authorization process – such as during incident response.
If these temporary accounts are left enabled (and may have elevated permissions via sudo, group membership or SSH keys) and are not automatically expired or manually removed, the security posture of the system will be degraded and left vulnerable to insider threat.
Temporary accounts are not the same as "last resort" or "break glass" emergency accounts which are local system accounts to be used by and maintained by authorized system administrators when standard remote access/authentication is unavailable. Emergency accounts are not subject to removal or expiration requirements.
Satisfies: SRG-OS-000002-GPOS-00002, SRG-OS-000123-GPOS-00064
Configure automatic account expiration after 72 hours by running the following command for each temporary account:
$ chage -E $(date -d +3days +%Y-%m-%d)
Verify temporary accounts have been provisioned with an expiration date of 72 hours.
For every existing temporary account, run the following command to obtain its account expiration information:
$ chage -l
Verify each of these accounts has an expiration date set within 72 hours.
If any temporary accounts have an expiration date set to "never" or do not expire within 72 hours, this is a finding.
STIG ID: ALMA-09-004970 | SRG: SRG-OS-000004-GPOS-00004 | Severity: medium | CCI: | Vulnerability Id: V-269129
Audit records provide a means to investigate events related to a security incident. Insufficient audit coverage will make identifying those responsible challenging or impossible.
This auditd policy will watch for and alert the system administrators regarding any modifications to the "/etc/sudoers" file such as adding privileged users, groups, or commands.
Satisfies: SRG-OS-000004-GPOS-00004, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000304-GPOS-00121, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000470-GPOS-00214, SRG-OS-000471-GPOS-00215, SRG-OS-000239-GPOS-00089, SRG-OS-000240-GPOS-00090, SRG-OS-000241-GPOS-00091, SRG-OS-000303-GPOS-00120, SRG-OS-000466-GPOS-00210, SRG-OS-000476-GPOS-00221, SRG-OS-000755-GPOS-00220
Configure AlmaLinux OS 9 to generate audit records for all account creations, modifications, disabling, and termination events that affect "/etc/sudoers.
Add the following to the "/etc/audit/rules.d/audit.rules" file:
-w /etc/sudoers -p wa -k identity
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Reboot the server so the changes to take effect.
Verify AlmaLinux OS 9 generates audit records for all account creations, modifications, disabling, and termination events that affect the "/etc/sudoers" file, with the following command:
$ grep /etc/sudoers /etc/audit/audit.rules
-w /etc/sudoers -p wa -k identity
If the command does not return a line or the line is commented out, this is a finding.
Note: The "-k" allows for specifying an arbitrary identifier, and the string after it does not need to match the example output above.
STIG ID: ALMA-09-005080 | SRG: SRG-OS-000004-GPOS-00004 | Severity: medium | CCI: | Vulnerability Id: V-269130
Audit records provide a means to investigate events related to a security incident. Insufficient audit coverage will make identifying those responsible challenging or impossible.
This auditd policy will watch for and alert the system administrators regarding any modifications to the "/etc/group" file such as adding/removing/disabling groups.
Satisfies: SRG-OS-000004-GPOS-00004, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000304-GPOS-00121, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000470-GPOS-00214, SRG-OS-000471-GPOS-00215, SRG-OS-000239-GPOS-00089, SRG-OS-000240-GPOS-00090, SRG-OS-000241-GPOS-00091, SRG-OS-000303-GPOS-00120, SRG-OS-000466-GPOS-00210, SRG-OS-000476-GPOS-00221
Configure AlmaLinux OS 9 to generate audit records for all account creations, modifications, disabling, and termination events that affect "/etc/group".
Add the following to the "/etc/audit/rules.d/audit.rules" file:
-w /etc/group -p wa -k identity
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Reboot the server so the changes to take effect.
Verify AlmaLinux OS 9 generates audit records for all account creations, modifications, disabling, and termination events that affect the "/etc/group" file, with the following command:
$ grep /etc/group /etc/audit/audit.rules
-w /etc/group -p wa -k identity
If the command does not return a line or the line is commented out, this is a finding.
Note: The "-k" allows for specifying an arbitrary identifier, and the string after it does not need to match the example output above.
STIG ID: ALMA-09-005190 | SRG: SRG-OS-000004-GPOS-00004 | Severity: medium | CCI: | Vulnerability Id: V-269131
Audit records provide a means to investigate events related to a security incident. Insufficient audit coverage will make identifying those responsible challenging or impossible.
This auditd policy will watch for and alert the system administrators regarding any modifications to the "/etc/gshadow" file such as adding/removing/disabling users.
Satisfies: SRG-OS-000004-GPOS-00004, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000304-GPOS-00121, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000470-GPOS-00214, SRG-OS-000471-GPOS-00215, SRG-OS-000239-GPOS-00089, SRG-OS-000240-GPOS-00090, SRG-OS-000241-GPOS-00091, SRG-OS-000303-GPOS-00120, SRG-OS-000466-GPOS-00210, SRG-OS-000476-GPOS-00221
Configure AlmaLinux OS 9 to generate audit records for all account creations, modifications, disabling, and termination events that affect "/etc/gshadow".
Add the following to the "/etc/audit/rules.d/audit.rules" file:
-w /etc/gshadow -p wa -k identity
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Reboot the server so the changes to take effect.
Verify AlmaLinux OS 9 generates audit records for all account creations, modifications, disabling, and termination events that affect the "/etc/gshadow" file, with the following command:
$ grep /etc/gshadow /etc/audit/audit.rules
-w /etc/gshadow -p wa -k identity
If the command does not return a line or the line is commented out, this is a finding.
Note: The "-k" allows for specifying an arbitrary identifier, and the string after it does not need to match the example output above.
STIG ID: ALMA-09-005300 | SRG: SRG-OS-000004-GPOS-00004 | Severity: medium | CCI: | Vulnerability Id: V-269132
Audit records provide a means to investigate events related to a security incident. Insufficient audit coverage will make identifying those responsible challenging or impossible.
This auditd policy will watch for and alert the system administrators regarding any modifications to the "/etc/security/opasswd" file such as adding/removing/disabling users.
Satisfies: SRG-OS-000004-GPOS-00004, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000304-GPOS-00121, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000470-GPOS-00214, SRG-OS-000471-GPOS-00215, SRG-OS-000239-GPOS-00089, SRG-OS-000240-GPOS-00090, SRG-OS-000241-GPOS-00091, SRG-OS-000303-GPOS-00120, SRG-OS-000466-GPOS-00210, SRG-OS-000476-GPOS-00221
Configure AlmaLinux OS 9 to generate audit records for all account creations, modifications, disabling, and termination events that affect "/etc/security/opasswd".
Add the following to the "/etc/audit/rules.d/audit.rules" file:
-w /etc/security/opasswd -p wa -k identity
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Reboot the server so the changes to take effect.
Verify AlmaLinux OS 9 generates audit records for all account creations, modifications, disabling, and termination events that affect the "/etc/security/opasswd" file, with the following command:
$ grep /etc/security/opasswd /etc/audit/audit.rules
-w /etc/security/opasswd -p wa -k identity
If the command does not return a line or the line is commented out, this is a finding.
Note: The "-k" allows for specifying an arbitrary identifier, and the string after it does not need to match the example output above.
STIG ID: ALMA-09-005410 | SRG: SRG-OS-000004-GPOS-00004 | Severity: medium | CCI: | Vulnerability Id: V-269133
Audit records provide a means to investigate events related to a security incident. Insufficient audit coverage will make identifying those responsible challenging or impossible.
This auditd policy will watch for and alert the system administrators regarding any modifications to the "/etc/passwd" file such as adding/removing/disabling users.
Satisfies: SRG-OS-000004-GPOS-00004, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000304-GPOS-00121, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000470-GPOS-00214, SRG-OS-000471-GPOS-00215, SRG-OS-000239-GPOS-00089, SRG-OS-000240-GPOS-00090, SRG-OS-000241-GPOS-00091, SRG-OS-000303-GPOS-00120, SRG-OS-000466-GPOS-00210, SRG-OS-000476-GPOS-00221, SRG-OS-000274-GPOS-00104, SRG-OS-000275-GPOS-00105, SRG-OS-000276-GPOS-00106, SRG-OS-000277-GPOS-00107
Configure AlmaLinux OS 9 to generate audit records for all account creations, modifications, disabling, and termination events that affect "/etc/passwd".
Add the following to the "/etc/audit/rules.d/audit.rules" file:
-w /etc/passwd -p wa -k identity
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Reboot the server so the changes to take effect.
Verify AlmaLinux OS 9 generates audit records for all account creations, modifications, disabling, and termination events that affect the "/etc/passwd" file, with the following command:
$ grep /etc/passwd /etc/audit/audit.rules
-w /etc/passwd -p wa -k identity
If the command does not return a line or the line is commented out, this is a finding.
Note: The "-k" allows for specifying an arbitrary identifier, and the string after it does not need to match the example output above.
STIG ID: ALMA-09-005960 | SRG: SRG-OS-000004-GPOS-00004 | Severity: medium | CCI: | Vulnerability Id: V-269134
Audit records provide a means to investigate events related to a security incident. Insufficient audit coverage will make identifying those responsible challenging or impossible.
This auditd policy will watch for and alert the system administrators regarding any modifications to the "/etc/shadow" file such as adding/removing/disabling users.
Satisfies: SRG-OS-000004-GPOS-00004, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000304-GPOS-00121, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000470-GPOS-00214, SRG-OS-000471-GPOS-00215, SRG-OS-000239-GPOS-00089, SRG-OS-000240-GPOS-00090, SRG-OS-000241-GPOS-00091, SRG-OS-000303-GPOS-00120, SRG-OS-000466-GPOS-00210, SRG-OS-000476-GPOS-00221
Configure AlmaLinux OS 9 to generate audit records for all account creations, modifications, disabling, and termination events that affect "/etc/shadow" using the following command.
Add the following to the "/etc/audit/rules.d/audit.rules" file:
-w /etc/shadow -p wa -k identity
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Reboot the server so the changes to take effect.
Verify AlmaLinux OS 9 generates audit records for all account creations, modifications, disabling, and termination events that affect the "/etc/shadow" file, with the following command:
$ grep /etc/shadow /etc/audit/audit.rules
-w /etc/shadow -p wa -k identity
If the command does not return a line or the line is commented out, this is a finding.
Note: The "-k" allows for specifying an arbitrary identifier, and the string after it does not need to match the example output above.
STIG ID: ALMA-09-006070 | SRG: SRG-OS-000004-GPOS-00004 | Severity: medium | CCI: | Vulnerability Id: V-269135
Audit records provide a means to investigate events related to a security incident. Insufficient audit coverage will make identifying those responsible challenging or impossible.
This auditd policy will watch for and alert the system administrators regarding any modifications to the files within "/etc/sudoers.d/" such as adding privileged users, groups, or commands.
Satisfies: SRG-OS-000004-GPOS-00004, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000304-GPOS-00121, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000470-GPOS-00214, SRG-OS-000471-GPOS-00215, SRG-OS-000239-GPOS-00089, SRG-OS-000240-GPOS-00090, SRG-OS-000241-GPOS-00091, SRG-OS-000303-GPOS-00120, SRG-OS-000466-GPOS-00210, SRG-OS-000476-GPOS-00221
Configure AlmaLinux OS 9 to generate audit records for all account creations, modifications, disabling, and termination events that affect "/etc/sudoers.d/.
Add the following to the "/etc/audit/rules.d/audit.rules" file:
-w /etc/sudoers.d/ -p wa -k identity
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Reboot the server so the changes to take effect.
Verify AlmaLinux OS 9 generates audit records for all account creations, modifications, disabling, and termination events that affect the files within "/etc/sudoers.d/", with the following command:
$ grep /etc/sudoers.d/ /etc/audit/audit.rules
-w /etc/sudoers.d/ -p wa -k identity
If the command does not return a line or the line is commented out, this is a finding.
Note: The "-k" allows for specifying an arbitrary identifier, and the string after it does not need to match the example output above.
STIG ID: ALMA-09-006180 | SRG: SRG-OS-000080-GPOS-00048 | Severity: medium | CCI: | Vulnerability Id: V-269136
This requirement prevents attackers with physical access from easily bypassing security on the machine and gaining root access.
Such accesses are further prevented by configuring the bootloader password.
Configure AlmaLinux OS 9 to require authentication for emergency mode.
Add or modify the following line in the "/usr/lib/systemd/system/emergency.service" file:
ExecStart=-/usr/lib/systemd/systemd-sulogin-shell emergency
"sudo systemctl edit emergency.service" can also be used to create a "/etc/systemd/system/emergency.service.d/override.conf" file.
Verify that AlmaLinux OS 9 requires authentication for emergency mode with the following command:
$ grep -E 'ExecStart.*sulogin' /usr/lib/systemd/system/emergency.service
ExecStart=-/usr/lib/systemd/systemd-sulogin-shell emergency
If this line is not returned, or is commented out, this is a finding.
If the output is different, this is a finding.
STIG ID: ALMA-09-006290 | SRG: SRG-OS-000080-GPOS-00048 | Severity: medium | CCI: | Vulnerability Id: V-269137
Password protection on the boot loader configuration ensures users with physical access cannot trivially alter important bootloader settings. These include which kernel to use, and whether to enter single-user mode.
Configure AlmaLinux OS 9 to require a grub bootloader password for the grub superuser account.
Generate an encrypted grub2 password for the grub superuser account with the following command:
$ grub2-setpassword
Enter password:
Confirm password:
Verify the boot loader superuser password is required using the following command:
$ grep password /etc/grub2.cfg
password_pbkdf2 superman ${GRUB2_PASSWORD}
Verify the boot loader superuser password has been set and the password is encrypted using the following command:
$ cat /boot/grub2/user.cfg
GRUB2_PASSWORD=grub.pbkdf2.sha512.10000.5766DCE424DCD4F0A2F5AC774C044BE8B904BC
F0022B671CD5E522A3568C599F327EBA3F3F5AB30D69A9B9A4FD172B12435BC10BE0A9B40669FB
A5C5ECBE8D1B.EAC815AE6F8A3F79F800D2EC7F454933BC3D63282532AAB1C487CA25331DD359F
5BF61166EDB53FB33977E982A9F20327D988DA15CBF7E4238357E65C5AEAF3C
If a "GRUB2_PASSWORD" is not set, this is a finding.
STIG ID: ALMA-09-006400 | SRG: SRG-OS-000080-GPOS-00048 | Severity: medium | CCI: | Vulnerability Id: V-269138
Having a nondefault grub superuser username makes password-guessing attacks less effective.
Configure AlmaLinux OS 9 to have a unique username for the grub superuser account using the following commands:
$ sed -ri 's/root/superman/' /etc/grub.d/01_users
$ grub2-mkconfig -o /boot/grub2/grub.cfg
Verify the boot loader superuser account has been set with the following command:
$ grep -A1 "superusers" /etc/grub2.cfg
set superusers="superman"
export superusers
password_pbkdf2 superman ${GRUB2_PASSWORD}
In this example "superman" is the actual account name, changed from the default "root".
If superusers contains easily guessable usernames, this is a finding.
STIG ID: ALMA-09-006510 | SRG: SRG-OS-000080-GPOS-00048 | Severity: medium | CCI: | Vulnerability Id: V-269139
This requirement prevents attackers with physical access from easily bypassing security on the machine and gaining root access.
Such accesses are further prevented by configuring the bootloader password.
Configure AlmaLinux OS 9 to require authentication for single-user mode.
Add or modify the following line in the "/usr/lib/systemd/system/rescue.service" file:
ExecStart=-/usr/lib/systemd/systemd-sulogin-shell rescue
"sudo systemctl edit rescue.service" can also be used to create a "/etc/systemd/system/rescue.service.d/override.conf" file.
Verify that AlmaLinux OS 9 requires authentication for single-user mode with the following command:
$ grep -E 'ExecStart.*sulogin' /usr/lib/systemd/system/rescue.service
ExecStart=-/usr/lib/systemd/systemd-sulogin-shell rescue
If this line is not returned or is commented out, this is a finding.
STIG ID: ALMA-09-006620 | SRG: SRG-OS-000324-GPOS-00125 | Severity: high | CCI: | Vulnerability Id: V-269140
A locally logged-on user who presses Ctrl-Alt-Delete in quick succession when at the console can reboot the system.
If accidentally pressed, as could happen in the case of a mixed OS environment, this can create the risk of short-term loss of availability of systems due to unintentional reboot.
In a graphical user environment, risk of unintentional reboot from the Ctrl-Alt-Delete sequence is reduced because the user will be prompted before any action is taken.
Configure the system to disable the CtrlAltDelBurstAction by added or modifying the following line in the "/etc/systemd/system.conf" configuration file:
CtrlAltDelBurstAction=none
Reload the daemon for this change to take effect.
$ systemctl daemon-reexec
Verify AlmaLinux OS 9 is configured to not reboot the system when Ctrl-Alt-Delete is pressed seven times within two seconds with the following command:
$ systemd-analyze cat-config systemd/system.conf | grep -v '#' | grep CtrlAltDel
CtrlAltDelBurstAction=none
If "CtrlAltDelBurstAction" is not set to "none", is commented out, or is missing, this is a finding.
STIG ID: ALMA-09-006730 | SRG: SRG-OS-000324-GPOS-00125 | Severity: high | CCI: | Vulnerability Id: V-269141
A locally logged-on user who presses Ctrl-Alt-Delete when at the console can reboot the system.
If accidentally pressed, as could happen in the case of a mixed OS environment, this can create the risk of short-term loss of availability of systems due to unintentional reboot.
In a graphical user environment, risk of unintentional reboot from the Ctrl-Alt-Delete sequence is reduced because the user will be prompted before any action is taken.
Configure AlmaLinux OS 9 to disable the ctrl-alt-del.target with the following command:
$ systemctl disable --now reboot.target
$ systemctl mask --now reboot.target
Verify AlmaLinux OS 9 is not configured to reboot the system when Ctrl-Alt-Delete is pressed with the following command:
$ systemctl status ctrl-alt-del.target
reboot.target
Loaded: masked (Reason: Unit reboot.target is masked.)
Active: inactive (dead)
If the "reboot.target" is loaded and not masked, this is a finding.
STIG ID: ALMA-09-006840 | SRG: SRG-OS-000324-GPOS-00125 | Severity: medium | CCI: | Vulnerability Id: V-269142
"sudo" is a program designed to allow a system administrator to give limited root privileges to users and log root activity.
The basic philosophy is to give as few privileges as possible but still allow system users to complete their work.
The sudo package can be installed with the following command:
$ dnf install sudo
Verify that the AlmaLinux OS 9 sudo package is installed with the following command:
$ dnf list --installed sudo
Installed Packages
sudo.x86_64 1.9.5p2-9.el9 @anaconda
If the "sudo" package is not installed, this is a finding.
STIG ID: ALMA-09-006950 | SRG: SRG-OS-000324-GPOS-00125 | Severity: medium | CCI: | Vulnerability Id: V-269143
The debug-shell requires no authentication and provides root privileges to anyone who has physical access to the machine.
While this feature is disabled by default, masking it adds an additional layer of assurance that it will not be enabled via a dependency in systemd.
This also prevents attackers with physical access from easily bypassing security on the machine through valid troubleshooting configurations and gaining root access when the system is rebooted.
Configure AlmaLinux OS 9 to mask the debug-shell systemd service with the following command:
$ systemctl mask --now debug-shell.service
Verify AlmaLinux OS 9 is configured to mask the debug-shell systemd service with the following command:
$ systemctl status debug-shell.service
debug-shell.service
Loaded: masked (Reason: Unit debug-shell.service is masked.)
Active: inactive (dead)
If the "debug-shell.service" is loaded and not masked, this is a finding.
STIG ID: ALMA-09-007060 | SRG: SRG-OS-000324-GPOS-00125 | Severity: medium | CCI: | Vulnerability Id: V-269144
By enabling the fs.protected_hardlinks kernel parameter, users can no longer create soft or hard links to files they do not own.
Disallowing such hardlinks mitigates vulnerabilities based on unsecure file systems accessed by privileged programs, avoiding an exploitation vector exploiting unsafe use of open() or creat().
Configure AlmaLinux OS 9 to enable DAC on hardlinks with the following command:
$ echo "fs.protected_hardlinks = 1" > /etc/sysctl.d/60-hardlinks.conf
Load settings from all system configuration files with the following command:
$ sysctl –system
Verify AlmaLinux OS 9 is configured to enable DAC on hardlinks with the following command:
$ sysctl fs.protected_hardlinks
fs.protected_hardlinks = 1
If "fs.protected_hardlinks" is not set to "1" or is missing, this is a finding.
Check that the configuration files are present to enable this kernel parameter:
$ /usr/lib/systemd/systemd-sysctl --cat-config | egrep -v '^(#|;)' | grep -F fs.protected_hardlinks | tail -1
fs.protected_hardlinks = 1
If "fs.protected_hardlinks" is not set to "1" or is missing, this is a finding.
STIG ID: ALMA-09-007170 | SRG: SRG-OS-000324-GPOS-00125 | Severity: medium | CCI: | Vulnerability Id: V-269145
By enabling the fs.protected_symlinks kernel parameter, symbolic links are permitted to be followed only when outside a sticky world-writable directory, or when the user identifier (UID) of the link and follower match, or when the directory owner matches the symlink's owner.
Disallowing such symlinks helps mitigate vulnerabilities based on unsecure file systems accessed by privileged programs, avoiding an exploitation vector exploiting unsafe use of open() or creat().
Configure AlmaLinux OS 9 to enable DAC on symlinks with the following command:
$ echo "fs.protected_symlinks = 1" > /etc/sysctl.d/60-symlinks.conf
Load settings from all system configuration files with the following command:
$ sysctl --system
Verify AlmaLinux OS 9 is configured to enable DAC on symlinks with the following command:
$ sysctl fs.protected_symlinks
fs.protected_symlinks = 1
If "fs.protected_symlinks " is not set to "1" or is missing, this is a finding.
Check that the configuration files are present to enable this kernel parameter:
$ /usr/lib/systemd/systemd-sysctl --cat-config | egrep -v '^(#|;)' | grep -F fs.protected_symlinks | tail -1
fs.protected_symlinks = 1
If "fs.protected_symlinks" is not set to "1" or is missing, this is a finding.
STIG ID: ALMA-09-007280 | SRG: SRG-OS-000327-GPOS-00127 | Severity: medium | CCI: | Vulnerability Id: V-269146
Misuse of privileged functions, either intentionally or unintentionally by authorized users, or by unauthorized external entities that have compromised information system accounts, is a serious and ongoing concern and can have significant adverse impacts on organizations. Auditing the use of privileged functions is one way to detect such misuse and identify the risk from insider threats and the advanced persistent threat.
Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000326-GPOS-00126
Configure AlmaLinux OS 9 to generate audit records upon successful/unsuccessful attempts to use the "sudo" command.
Add the following to the "/etc/audit/rules.d/audit.rules" file:
-a always,exit -F arch=b32 -S execve -C uid!=euid -F euid=0 -k execpriv
-a always,exit -F arch=b64 -S execve -C uid!=euid -F euid=0 -k execpriv
-a always,exit -F arch=b32 -S execve -C gid!=egid -F egid=0 -k execpriv
-a always,exit -F arch=b64 -S execve -C gid!=egid -F egid=0 -k execpriv
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Verify that AlmaLinux OS 9 is configured to audit the execution of the "execve" system call with the following command:
$ auditctl -l | grep execve
-a always,exit -F arch=b32 -S execve -C uid!=euid -F euid=0 -F key=execpriv
-a always,exit -F arch=b64 -S execve -C uid!=euid -F euid=0 -F key=execpriv
-a always,exit -F arch=b32 -S execve -C gid!=egid -F egid=0 -F key=execpriv
-a always,exit -F arch=b64 -S execve -C gid!=egid -F egid=0 -F key=execpriv
If the command does not return all lines, or the lines are commented out, this is a finding.
STIG ID: ALMA-09-007500 | SRG: SRG-OS-000021-GPOS-00005 | Severity: medium | CCI: | Vulnerability Id: V-269147
By limiting the number of failed logon attempts, the risk of unauthorized system access via user password guessing, otherwise known as brute-force attacks, is reduced. Limits are imposed by locking the account.
Configure AlmaLinux OS 9 to lock an account when three unsuccessful logon attempts occur using pam_faillock.
First, enable the feature using the following command:
$ authselect enable-feature with-faillock
Then, add or update the following line in the "/etc/security/faillock.conf" file:
deny = 3
Verify AlmaLinux OS 9 is configured to lock an account after three unsuccessful logon attempts with the command:
$ grep deny /etc/security/faillock.conf
deny = 3
If the "deny" option is not set to 3 or less (but not 0), is missing or commented out, this is a finding.
STIG ID: ALMA-09-007610 | SRG: SRG-OS-000021-GPOS-00005 | Severity: medium | CCI: | Vulnerability Id: V-269148
By limiting the number of failed logon attempts, the risk of unauthorized system access via user password guessing, otherwise known as brute-force attacks, is reduced. Limits are imposed by locking the account.
Configure AlmaLinux OS 9 to lock the root account after a number of incorrect login attempts using pam_faillock.
First, enable the feature using the following command:
$ authselect enable-feature with-faillock
Then, add or uncomment the following line in the "/etc/security/faillock.conf" file:
even_deny_root
Verify AlmaLinux OS 9 is configured to lock the root account after three unsuccessful logon attempts with the command:
$ grep even_deny_root /etc/security/faillock.conf
even_deny_root
If the "even_deny_root" option is not set, is missing, or is commented out, this is a finding.
STIG ID: ALMA-09-007720 | SRG: SRG-OS-000021-GPOS-00005 | Severity: medium | CCI: | Vulnerability Id: V-269149
By limiting the number of failed logon attempts, the risk of unauthorized system access via user password guessing, otherwise known as brute-force attacks, is reduced. Limits are imposed by locking the account.
Configure AlmaLinux OS 9 to lock an account after a number of incorrect login attempts within 15 minutes using pam_faillock.
First, enable the feature using the following command:
$ authselect enable-feature with-faillock
Then, add or uncomment the following line in the "/etc/security/faillock.conf" file:
fail_interval = 900
Note: If the system administrator demonstrates the use of an approved centralized account management method that locks an account after three unsuccessful logon attempts within a period of 15 minutes, this requirement is Not Applicable.
Verify AlmaLinux OS 9 locks an account after three unsuccessful logon attempts within a period of 15 minutes with the following command:
$ grep fail_interval /etc/security/faillock.conf
fail_interval = 900
If the "fail_interval" option is not set to 900 or less (but not 0), the line is commented out, or the line is missing, this is a finding.
STIG ID: ALMA-09-007830 | SRG: SRG-OS-000021-GPOS-00005 | Severity: medium | CCI: | Vulnerability Id: V-269150
By limiting the number of failed logon attempts, the risk of unauthorized system access via user password guessing, otherwise known as brute-force attacks, is reduced. Limits are imposed by locking the account.
If the pam_faillock.so module is not loaded, the system will not correctly lockout accounts to prevent password guessing attacks.
Configure AlmaLinux OS 9 to include the use of the pam_faillock.so module in the /etc/pam.d/system-auth file.
Add/modify the appropriate sections of the "/etc/pam.d/system-auth" file to match the following lines, ensuring that the "preauth" line is listed before pam_unix.so.
auth required pam_faillock.so preauth
auth required pam_faillock.so authfail
account required pam_faillock.so
Note: Do not simply copy these three lines into the file; their location/order is important.
Verify the pam_faillock.so module is present in the "/etc/pam.d/system-auth" file:
$ grep pam_faillock.so /etc/pam.d/system-auth
auth required pam_faillock.so preauth
auth required pam_faillock.so authfail
account required pam_faillock.so
If the pam_faillock.so module is not present in the "/etc/pam.d/system-auth" file with the "preauth" line listed before pam_unix.so, this is a finding.
If the system administrator (SA) can demonstrate that the required configuration is contained in a PAM configuration file included or substacked from the system-auth file, this is not a finding.
STIG ID: ALMA-09-007940 | SRG: SRG-OS-000021-GPOS-00005 | Severity: medium | CCI: | Vulnerability Id: V-269151
By limiting the number of failed logon attempts, the risk of unauthorized system access via user password guessing, otherwise known as brute-force attacks, is reduced. Limits are imposed by locking the account.
If the pam_faillock.so module is not loaded, the system will not correctly lockout accounts to prevent password guessing attacks.
Configure AlmaLinux OS 9 to include the use of the pam_faillock.so module in the /etc/pam.d/password-auth file.
Add/modify the appropriate sections of the "/etc/pam.d/password-auth" file to match the following lines, ensuring that the "preauth" line is listed before pam_unix.so.
auth required pam_faillock.so preauth
auth required pam_faillock.so authfail
account required pam_faillock.so
Note: Do not simply copy these three lines into the file; their location/order is important.
Verify the pam_faillock.so module is present in the "/etc/pam.d/password-auth" file:
$ grep pam_faillock.so /etc/pam.d/password-auth
auth required pam_faillock.so preauth
auth required pam_faillock.so authfail
account required pam_faillock.so
If the pam_faillock.so module is not present in the "/etc/pam.d/password-auth" file with the "preauth" line listed before pam_unix.so, this is a finding.
If the system administrator (SA) can demonstrate that the required configuration is contained in a PAM configuration file included or substacked from the system-auth file, this is not a finding.
STIG ID: ALMA-09-008050 | SRG: SRG-OS-000021-GPOS-00005 | Severity: medium | CCI: | Vulnerability Id: V-269152
Without auditing of these events, it may be harder or impossible to identify what an attacker did after an attack.
Satisfies: SRG-OS-000021-GPOS-00005, SRG-OS-000470-GPOS-00214
Configure AlmaLinux OS 9 to log username information when unsuccessful logon attempts occur.
Add/modify the "/etc/security/faillock.conf" file to match the following line:
audit
Verify the "/etc/security/faillock.conf" file is configured to log username information when unsuccessful logon attempts occur with the following command:
$ grep audit /etc/security/faillock.conf
audit
If the "audit" option is not set, is missing, or is commented out, this is a finding.
STIG ID: ALMA-09-008160 | SRG: SRG-OS-000329-GPOS-00128 | Severity: medium | CCI: | Vulnerability Id: V-269153
By limiting the number of failed logon attempts, the risk of unauthorized system access via user password guessing, otherwise known as brute-force attacks, is reduced. Limits are imposed by locking the account.
Configure AlmaLinux OS 9 to lock accounts until released by an administrator using pam_faillock.
First, enable the feature using the following command:
$ authselect enable-feature with-faillock
Then, add or uncomment the following line in the "/etc/security/faillock.conf" file:
unlock_time = 0
Verify AlmaLinux OS 9 is configured to lock an account until released by an administrator after three unsuccessful logon attempts with the command:
$ grep unlock_time /etc/security/faillock.conf
unlock_time = 0
If the "unlock_time" option is not set to "0", the line is missing, or is commented out, this is a finding.
STIG ID: ALMA-09-008270 | SRG: SRG-OS-000329-GPOS-00128 | Severity: medium | CCI: | Vulnerability Id: V-269154
By limiting the number of failed logon attempts, the risk of unauthorized system access via user password guessing, otherwise known as brute-forcing, is reduced. Limits are imposed by locking the account.
Having account locks persist across reboots ensures that a locked account is only unlocked by an administrator.
If the locks did not persist across reboots, an attacker could reboot the system to continue brute force attacks against the accounts on the system.
The default /var/run/faillock directory is cleared upon reboot and should not be used.
Configure AlmaLinux OS 9 to maintain the contents of the faillock directory after a reboot.
Add/modify the "/etc/security/faillock.conf" file to match the following line:
dir = /var/log/faillock
Verify the "/etc/security/faillock.conf" file is configured to use a nondefault faillock directory to ensure its contents persist after reboot with the following command:
$ grep "dir =" /etc/security/faillock.conf
dir = /var/log/faillock
If the "dir" option is set to the default /var/run/faillock directory, is missing, or is commented out, this is a finding.
STIG ID: ALMA-09-008380 | SRG: SRG-OS-000329-GPOS-00128 | Severity: medium | CCI: | Vulnerability Id: V-269155
By limiting the number of failed logon attempts, the risk of unauthorized system access via user password guessing, otherwise known as brute-forcing, is reduced. Limits are imposed by locking the account.
Not having the correct SELinux context on the faillock directory may lead to unauthorized access to the directory meaning that accounts could be unlocked by a nonadministrator.
Configure AlmaLinux OS 9 to allow the use of a nondefault faillock tally directory while SELinux enforces a targeted policy.
Create a nondefault faillock tally directory (if it does not already exist) using the following command:
$ mkdir /var/log/faillock
Update the /etc/selinux/targeted/contexts/files/file_contexts.local file with the "faillog_t" context type for the nondefault faillock tally directory using the following command:
$ semanage fcontext -a -t faillog_t "/var/log/faillock(/.*)?"
Update the context type of the nondefault faillock directory and files within using the following command:
$ restorecon -RFv /var/log/faillock
Note: If the system does not have SELinux enabled and enforcing, a targeted policy, or if the pam_faillock module is not configured for use, this requirement is Not Applicable.
Verify the location of the nondefault tally directory for the pam_faillock module with the following command:
$ grep "dir =" /etc/security/faillock.conf
dir = /var/log/faillock
Check the security context type of the nondefault tally directory with the following command:
$ ls -Zd /var/log/faillock
system_u:object_r:faillog_t:s0 /var/log/faillock
If the security context type of the nondefault tally directory is not "faillog_t", this is a finding.
STIG ID: ALMA-09-008490 | SRG: SRG-OS-000023-GPOS-00006 | Severity: medium | CCI: | Vulnerability Id: V-269156
Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.
System use notifications are required only for access via logon interfaces with human users and are not required when such human interfaces do not exist.
The banner must be formatted in accordance with applicable DOD policy. Use the following verbiage for operating systems that can accommodate banners of 1300 characters:
"You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only.
By using this IS (which includes any device attached to this IS), you consent to the following conditions:
-The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations.
-At any time, the USG may inspect and seize data stored on this IS.
-Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose.
-This IS includes security measures (e.g., authentication and access controls) to protect USG interests--not for your personal benefit or privacy.
-Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details."
Use the following verbiage for operating systems that have severe limitations on the number of characters that can be displayed in the banner:
"I've read & consent to terms in IS user agreem't."
If a login banner is not displayed, it may be difficult to prosecute an attacker.
Satisfies: SRG-OS-000023-GPOS-00006, SRG-OS-000228-GPOS-00088
Configure AlmaLinux OS 9 to prevent a user being able to override the GNOME banner setting by running the following commands:
$ echo "banner-message-enable" | tee /etc/dconf/db/local.d/locks/00-banner > /dev/null
$ dconf update
Note: This requirement assumes the use of the default graphical user interface, the GNOME desktop environment. If the system does not have any graphical user interface installed, this requirement is Not Applicable.
Verify AlmaLinux OS 9 prevents a user from disabling the banner for graphical user interfaces.
Determine if the operating system prevents modification of the GNOME banner setting with the following command:
$ grep banner-message-enable /etc/dconf/db/local.d/locks/*
banner-message-enable
If "banner-message-enable" is commented out or is missing, this is a finding.
STIG ID: ALMA-09-008600 | SRG: SRG-OS-000023-GPOS-00006 | Severity: medium | CCI: | Vulnerability Id: V-269157
Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.
System use notifications are required only for access via logon interfaces with human users and are not required when such human interfaces do not exist.
The banner must be formatted in accordance with applicable DOD policy. Use the following verbiage for operating systems that can accommodate banners of 1300 characters:
"You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only.
By using this IS (which includes any device attached to this IS), you consent to the following conditions:
-The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations.
-At any time, the USG may inspect and seize data stored on this IS.
-Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose.
-This IS includes security measures (e.g., authentication and access controls) to protect USG interests--not for your personal benefit or privacy.
-Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details."
Use the following verbiage for operating systems that have severe limitations on the number of characters that can be displayed in the banner:
"I've read & consent to terms in IS user agreem't."
If a login banner is not displayed, it may be difficult to prosecute an attacker.
Satisfies: SRG-OS-000023-GPOS-00006, SRG-OS-000228-GPOS-00088
Configure AlmaLinux OS 9 to display the Standard Mandatory DOD Notice and Consent Banner before granting access to the system via a graphical user logon.
Create a database to contain the systemwide graphical user logon settings (if it does not already exist) with the following command:
$ touch /etc/dconf/db/local.d/01-banner-message
Add the following lines to the [org/gnome/login-screen] section of the "/etc/dconf/db/local.d/01-banner-message":
[org/gnome/login-screen]
banner-message-enable=true
banner-message-text='You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only.\nBy using this IS (which includes any device attached to this IS), you consent to the following conditions:\n-The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations.\n-At any time, the USG may inspect and seize data stored on this IS.\n-Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose.\n-This IS includes security measures (e.g., authentication and access controls) to protect USG interests--not for your personal benefit or privacy.\n-Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details.'
Run the following command to update the database:
$ dconf update
Note: This requirement assumes the use of the default graphical user interface, the GNOME desktop environment. If the system does not have any graphical user interface installed, this requirement is Not Applicable.
Verify AlmaLinux OS 9 displays a banner before granting access to the operating system via a graphical user logon.
First, identify the location of the banner message file with the following command:
$ grep banner-message-text /etc/dconf/db/local.d/*
/etc/dconf/db/local.d/01-banner-message
Determine if the operating system displays a banner at the logon screen with the following command:
$ gsettings get org.gnome.login-screen banner-message-enable
true
Next, check that file contains the correct wording with the following command (substituting the path from above):
$ cat /etc/dconf/db/local.d/01-banner-message
If the banner is set correctly it will return the following text:
"You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only.
By using this IS (which includes any device attached to this IS), you consent to the following conditions:
-The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations.
-At any time, the USG may inspect and seize data stored on this IS.
-Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose.
-This IS includes security measures (e.g., authentication and access controls) to protect USG interests--not for your personal benefit or privacy.
-Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details."
If the banner text does not match the Standard Mandatory DOD Notice and Consent Banner exactly, or the dconf database does not include the "banner-message-text" setting or if it is not enabled, this is a finding.
STIG ID: ALMA-09-008710 | SRG: SRG-OS-000023-GPOS-00006 | Severity: medium | CCI: | Vulnerability Id: V-269158
Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.
System use notifications are required only for access via logon interfaces with human users and are not required when such human interfaces do not exist.
The banner must be formatted in accordance with applicable DOD policy. Use the following verbiage for operating systems that can accommodate banners of 1300 characters:
"You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only.
By using this IS (which includes any device attached to this IS), you consent to the following conditions:
-The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations.
-At any time, the USG may inspect and seize data stored on this IS.
-Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose.
-This IS includes security measures (e.g., authentication and access controls) to protect USG interests--not for your personal benefit or privacy.
-Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details."
Use the following verbiage for operating systems that have severe limitations on the number of characters that can be displayed in the banner:
"I've read & consent to terms in IS user agreem't."
If a login banner is not displayed, it may be difficult to prosecute an attacker.
Satisfies: SRG-OS-000023-GPOS-00006, SRG-OS-000228-GPOS-00088
Configure AlmaLinux OS 9 to display the Standard Mandatory DOD Notice and Consent Banner before granting access to the system via command line logon by running the command:
$ cat << EOF | tee /etc/issue
You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only.
By using this IS (which includes any device attached to this IS), you consent to the following conditions:
-The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations.
-At any time, the USG may inspect and seize data stored on this IS.
-Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose.
-This IS includes security measures (e.g., authentication and access controls) to protect USG interests--not for your personal benefit or privacy.
-Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details.
EOF
Verify AlmaLinux OS 9 displays the Standard Mandatory DOD Notice and Consent Banner before granting access to the operating system via a command line user logon.
Check that a banner is displayed at the command line login screen with the following command:
$ cat /etc/issue
If the banner is set correctly it will return the following text:
"You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only.
By using this IS (which includes any device attached to this IS), you consent to the following conditions:
-The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations.
-At any time, the USG may inspect and seize data stored on this IS.
-Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose.
-This IS includes security measures (e.g., authentication and access controls) to protect USG interests--not for your personal benefit or privacy.
-Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details."
If the banner text does not match the Standard Mandatory DOD Notice and Consent Banner exactly, this is a finding.
STIG ID: ALMA-09-008820 | SRG: SRG-OS-000023-GPOS-00006 | Severity: medium | CCI: | Vulnerability Id: V-269159
Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.
System use notifications are required only for access via logon interfaces with human users and are not required when such human interfaces do not exist.
The banner must be formatted in accordance with applicable DOD policy. Use the following verbiage for operating systems that can accommodate banners of 1300 characters:
"You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only.
By using this IS (which includes any device attached to this IS), you consent to the following conditions:
-The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations.
-At any time, the USG may inspect and seize data stored on this IS.
-Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose.
-This IS includes security measures (e.g., authentication and access controls) to protect USG interests--not for your personal benefit or privacy.
-Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details."
Use the following verbiage for operating systems that have severe limitations on the number of characters that can be displayed in the banner:
"I've read & consent to terms in IS user agreem't."
If a login banner is not displayed, it may be difficult to prosecute an attacker.
Satisfies: SRG-OS-000023-GPOS-00006, SRG-OS-000228-GPOS-00088
Configure AlmaLinux OS 9 to display the Standard Mandatory DOD Notice and Consent Banner before granting access to the system via command line logon by running the command:
cat << EOF | tee /etc/issue.net
You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only.
By using this IS (which includes any device attached to this IS), you consent to the following conditions:
-The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations.
-At any time, the USG may inspect and seize data stored on this IS.
-Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose.
-This IS includes security measures (e.g., authentication and access controls) to protect USG interests--not for your personal benefit or privacy.
-Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details.
EOF
Verify AlmaLinux OS 9 displays the Standard Mandatory DOD Notice and Consent Banner before granting access to the operating system via a command line user logon.
First, check that a banner text is correct with the following command:
$ cat /etc/issue.net
If the banner is set correctly it will return the following text:
"You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only.
By using this IS (which includes any device attached to this IS), you consent to the following conditions:
-The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations.
-At any time, the USG may inspect and seize data stored on this IS.
-Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose.
-This IS includes security measures (e.g., authentication and access controls) to protect USG interests--not for your personal benefit or privacy.
-Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details."
Next, check that the OpenSSH server is configured to display the banner using the following command:
$ sshd -T | grep banner
banner /etc/issue.net
If the banner text does not match the Standard Mandatory DOD Notice and Consent Banner exactly, or the SSH configuration does not include "Banner /etc/issue.net", this is a finding.
STIG ID: ALMA-09-009260 | SRG: SRG-OS-000363-GPOS-00150 | Severity: medium | CCI: | Vulnerability Id: V-269160
The "s-nail" package provides the mail command required to allow sending email notifications of unauthorized configuration changes to designated personnel.
The s-nail package can be installed with the following command:
$ dnf install s-nail
Verify that AlmaLinux OS 9 has the "s-nail" package is installed on the system with the following command:
$ dnf list --installed s-nail
s-nail.x86_64 14.9.22-6.el9 @AppStream
If "s-nail" package is not installed, this is a finding.
STIG ID: ALMA-09-009370 | SRG: SRG-OS-000364-GPOS-00151 | Severity: medium | CCI: | Vulnerability Id: V-269161
GSSAPI authentication is used to provide additional authentication mechanisms to applications. Allowing GSSAPI authentication through SSH exposes the system's GSSAPI to remote hosts, increasing the attack surface of the system.
Configure the SSH daemon to not allow GSSAPI authentication.
Add the following line to "/etc/ssh/sshd_config", or uncomment the line and set the value to "no":
GSSAPIAuthentication no
Alternatively, add the setting to an included file if the line "Include /etc/ssh/sshd_config.d/*.conf" is found at the top of the "/etc/ssh/sshd_config" file:
GSSAPIAuthentication no
Restart the SSH daemon for the settings to take effect:
$ systemctl restart sshd.service
Verify the SSH daemon does not allow GSSAPI authentication with the following command:
$ /usr/sbin/sshd -dd 2>&1 | awk '/filename/ {print $4}' | tr -d '\r' | tr '\n' ' ' | xargs sudo grep -iH '^\s*gssapiauthentication'
gssapiauthentication no
If the value is returned as "yes", the returned line is commented out, no output is returned, and the use of GSSAPI authentication has not been documented with the information system security officer (ISSO), this is a finding.
If the required value is not set, this is a finding.
STIG ID: ALMA-09-009480 | SRG: SRG-OS-000364-GPOS-00151 | Severity: medium | CCI: | Vulnerability Id: V-269162
Kerberos authentication for SSH is often implemented using Generic Security Service Application Program Interface (GSSAPI). If Kerberos is enabled through SSH, the SSH daemon provides a means of access to the system's Kerberos implementation. Vulnerabilities in the system's Kerberos implementations may be subject to exploitation.
Configure the SSH daemon to not allow Kerberos authentication.
Add the following line to "/etc/ssh/sshd_config", or uncomment the line and set the value to "no":
KerberosAuthentication no
Alternatively, add the setting to an included file if the line "Include /etc/ssh/sshd_config.d/*.conf" is found at the top of the "/etc/ssh/sshd_config" file:
KerberosAuthentication no
Restart the SSH daemon for the settings to take effect:
$ systemctl restart sshd.service
Verify the SSH daemon does not allow Kerberos authentication with the following command:
$ /usr/sbin/sshd -dd 2>&1 | awk '/filename/ {print $4}' | tr -d '\r' | tr '\n' ' ' | xargs sudo grep -iH '^\s*kerberosauthentication'
kerberosauthentication no
If the value is returned as "yes", the returned line is commented out, no output is returned, and the use of Kerberos authentication has not been documented with the information system security officer (ISSO), this is a finding.
STIG ID: ALMA-09-009590 | SRG: SRG-OS-000366-GPOS-00153 | Severity: high | CCI: | Vulnerability Id: V-269163
Changes to any software components can have significant effects on the overall security of the operating system. This requirement ensures the software has not been tampered with and that it has been provided by a trusted vendor.
Accordingly, patches, service packs, device drivers, or operating system components must be signed with a certificate recognized and approved by the organization.
Verifying the authenticity of the software prior to installation validates the integrity of the patch or upgrade received from a vendor. This ensures the software has not been tampered with and that it has been provided by a trusted vendor. Self-signed certificates are not allowed by this requirement. The operating system should not have to verify the software again. This requirement does not mandate DOD certificates for this purpose; however, the certificate used to verify the software must be from an approved certificate authority (CA).
Configure dnf to always check the GPG signature of software packages originating from external software repositories before installation.
Add or update the following line in the [main] section of the /etc/dnf/dnf.conf file:
gpgcheck=1
Verify that dnf always checks the GPG signature of software packages originating from external software repositories before installation:
$ grep gpgcheck /etc/dnf/dnf.conf
gpgcheck=1
If "gpgcheck" is not set to "1", or if the option is missing or commented out, ask the system administrator how the GPG signatures of software packages are verified.
If there is no process to verify GPG signatures that is approved by the organization, this is a finding.
STIG ID: ALMA-09-009700 | SRG: SRG-OS-000366-GPOS-00153 | Severity: high | CCI: | Vulnerability Id: V-269164
Changes to any software components can have significant effects on the overall security of the operating system. This requirement ensures the software has not been tampered with and that it has been provided by a trusted vendor.
Accordingly, patches, service packs, device drivers, or operating system components must be signed with a certificate recognized and approved by the organization.
Verifying the authenticity of the software prior to installation validates the integrity of the patch or upgrade received from a vendor. This ensures the software has not been tampered with and that it has been provided by a trusted vendor. Self-signed certificates are not allowed by this requirement. The operating system should not have to verify the software again. This requirement does not mandate DOD certificates for this purpose; however, the certificate used to verify the software must be from an approved certificate authority (CA).
Install AlmaLinux and TuxCare package-signing keys on the system and verify their fingerprints match vendor values.
$ curl https://repo.almalinux.org/almalinux/RPM-GPG-KEY-AlmaLinux-9 -o /etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux-9
$ curl https://repo.tuxcare.com/tuxcare/RPM-GPG-KEY-TuxCare -o /etc/pki/rpm-gpg/RPM-GPG-KEY-TuxCare
$ rpm --import https://repo.almalinux.org/almalinux/RPM-GPG-KEY-AlmaLinux-9
$ rpm --import https://repo.tuxcare.com/tuxcare/RPM-GPG-KEY-TuxCare
Using the steps listed in the Check, confirm the newly imported keys show as installed on the system and verify their fingerprints match vendor values.
Confirm AlmaLinux and TuxCare package-signing keys are installed on the system and verify their fingerprints match vendor values.
The keys are stored as "RPM-GPG-KEY-AlmaLinux-9" and "RPM-GPG-KEY-TuxCare" inside the "/etc/pki/rpm-gpg/" directory.
List GPG keys installed on the system using the following command:
$ rpm -q --queryformat "%{SUMMARY}\n" gpg-pubkey
TuxCare (Software Signing Key)
AlmaLinux OS 9
If the AlmaLinux and TuxCare GPG keys are not installed, this is a finding.
List key fingerprints of installed GPG keys using the following commands:
$ gpg -q --keyid-format short --with-fingerprint /etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux-9
pub rsa4096/B86B3716 2022-01-18 [SC]
Key fingerprint = BF18 AC28 7617 8908 D6E7 1267 D36C B86C B86B 3716
uid AlmaLinux OS 9
sub rsa4096/C9BA6CAA 2022-01-18 [E]
$ gpg -q --keyid-format short --with-fingerprint /etc/pki/rpm-gpg/RPM-GPG-KEY-TuxCare
pub rsa4096/8D50EB66 2023-03-06 [SC]
Key fingerprint = FAD7 8590 81D0 738B 7A82 8496 D07B F2A0 8D50 EB66
uid TuxCare (Software Signing Key)
sub rsa4096/A9C70659 2023-03-06 [E]
If either "/etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux-9" or "/etc/pki/rpm-gpg/RPM-GPG-KEY-TuxCare" key files are missing, this is a finding.
Compare key fingerprints of installed AlmaLinux and TuxCare GPG keys with fingerprints listed at
https://almalinux.org/security/
https://docs.tuxcare.com/enterprise-support-for-almalinux/#gnupg-keys
If the key fingerprints do not match, this is a finding.
STIG ID: ALMA-09-009810 | SRG: SRG-OS-000366-GPOS-00153 | Severity: high | CCI: | Vulnerability Id: V-269165
Changes to any software components can have significant effects on the overall security of the operating system. This requirement ensures the software has not been tampered with and that it has been provided by a trusted vendor.
Accordingly, patches, service packs, device drivers, or operating system components must be signed with a certificate recognized and approved by the organization.
Verifying the authenticity of the software prior to installation validates the integrity of the patch or upgrade received from a vendor. This ensures the software has not been tampered with and that it has been provided by a trusted vendor. Self-signed certificates are disallowed by this requirement. The operating system should not have to verify the software again. This requirement does not mandate DOD certificates for this purpose; however, the certificate used to verify the software must be from an approved certificate authority (CA).
Configure dnf to always check the GPG signature of local software packages before installation.
Add or update the following line in the [main] section of the /etc/dnf/dnf.conf file:
localpkg_gpgcheck=1
Verify that dnf always checks the GPG signature of locally installed software packages before installation:
$ grep localpkg_gpgcheck /etc/dnf/dnf.conf
localpkg_gpgcheck=1
If "localpkg_gpgcheck" is not set to "1", or if the option is missing, or is commented out, ask the system administrator (SA) how the GPG signatures of local software packages are being verified.
If there is no process to verify GPG signatures that is approved by the organization, this is a finding.
STIG ID: ALMA-09-009920 | SRG: SRG-OS-000366-GPOS-00153 | Severity: high | CCI: | Vulnerability Id: V-269166
Changes to any software components can have significant effects on the overall security of the operating system. This requirement ensures the software has not been tampered with and that it has been provided by a trusted vendor.
Accordingly, patches, service packs, device drivers, or operating system components must be signed with a certificate recognized and approved by the organization.
Verifying the authenticity of the software prior to installation validates the integrity of the patch or upgrade received from a vendor. This ensures the software has not been tampered with and that it has been provided by a trusted vendor. Self-signed certificates are disallowed by this requirement. The operating system should not have to verify the software again. This requirement does not mandate DOD certificates for this purpose; however, the certificate used to verify the software must be from an approved certificate authority (CA).
Configure dnf to always check the GPG signature of repository metadata.
Add or update the following line in the [main] section of the /etc/dnf/dnf.conf file:
repo_gpgcheck=1
Remove any instances of "repo_gpgcheck=0" from any "/etc/yum.repos.d/*.repo" files.
Verify that dnf always checks the GPG signature of repository metadata:
$ grep repo_gpgcheck /etc/dnf/dnf.conf /etc/yum.repos.d/*.repo
repo_gpgcheck=1
If "repo_gpgcheck" is not set to "1" in the global "/etc/dnf/dnf.conf" file, or if the option is missing or commented out, this is a finding.
If "repo_gpgcheck" is set to "0" in any of the "/etc/yum.repos.d/*.repo" files and the information system security officer (ISSO) lacks a documented requirement, this is a finding.
Note: Not all repositories support this feature.
STIG ID: ALMA-09-010030 | SRG: SRG-OS-000366-GPOS-00153 | Severity: high | CCI: | Vulnerability Id: V-269167
Changes to any software components can have significant effects on the overall security of the operating system. This requirement ensures the software has not been tampered with and that it has been provided by a trusted vendor.
Accordingly, patches, service packs, device drivers, or operating system components must be signed with a certificate recognized and approved by the organization.
Verifying the authenticity of the software prior to installation validates the integrity of the patch or upgrade received from a vendor. This ensures the software has not been tampered with and that it has been provided by a trusted vendor. Self-signed certificates are disallowed by this requirement. The operating system should not have to verify the software again. This requirement does not mandate DOD certificates for this purpose; however, the certificate used to verify the software must be from an approved certificate authority (CA).
Configure all software repositories defined in "/etc/yum.repos.d/" to have "gpgcheck" enabled:
$ sed -i 's/gpgcheck\s*=.*/gpgcheck=1/g' /etc/yum.repos.d/*
Verify that all software repositories defined in "/etc/yum.repos.d/" have been configured with "gpgcheck" enabled:
$ grep gpgcheck /etc/yum.repos.d/*.repo
/etc/yum.repos.d/tuxcare-fips.repo:gpgcheck=1
If "gpgcheck" is not set to "1" for all returned lines, this is a finding.
STIG ID: ALMA-09-010140 | SRG: SRG-OS-000366-GPOS-00153 | Severity: medium | CCI: | Vulnerability Id: V-269168
Changes to any software components can have significant effects on the overall security of the operating system. This requirement ensures the software has not been tampered with and that it has been provided by a trusted vendor.
Disabling kexec_load prevents an unsigned kernel image (that could be a windows kernel or modified vulnerable kernel) from being loaded. Kexec can be used subvert the entire secureboot process and should be avoided at all costs especially since it can load unsigned kernel images.
Add or edit the following line in a system configuration file in the "/etc/sysctl.d/" directory:
kernel.kexec_load_disabled = 1
Load settings from all system configuration files with the following command:
$ sysctl –system
Verify AlmaLinux OS 9 is configured to disable kernel image loading.
Check the status of the kernel.kexec_load_disabled kernel parameter with the following command:
$ sysctl kernel.kexec_load_disabled
kernel.kexec_load_disabled = 1
If "kernel.kexec_load_disabled" is not set to "1" or is missing, this is a finding.
Check that the configuration files are present to enable this kernel parameter with the following command:
$ /usr/lib/systemd/systemd-sysctl --cat-config | kernel.kexec_load_disabled
kernel.kexec_load_disabled = 1
If "kernel.kexec_load_disabled" is not set to "1" or is missing, this is a finding.
STIG ID: ALMA-09-010250 | SRG: SRG-OS-000259-GPOS-00100 | Severity: medium | CCI: | Vulnerability Id: V-269169
If AlmaLinux OS 9 allowed any user to make changes to software libraries, then those changes might be implemented without undergoing the appropriate testing and approvals that are part of a robust change management process.
This requirement applies to AlmaLinux OS 9 with software libraries that are accessible and configurable, as in the case of interpreted languages. Software libraries also include privileged programs that execute with escalated privileges.
Configure the system commands to be protected from unauthorized access.
Run the following command, replacing "[FILE]" with any system command file not group-owned by "root" or a required system account.
$ chgrp root [FILE]
Verify the system commands contained in the following directories are group-owned by "root", or a required system account, with the following command:
$ find -L /bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin ! -group root -exec ls -l {} \;
If any system commands are returned and is not group-owned by a required system account, this is a finding.
STIG ID: ALMA-09-010360 | SRG: SRG-OS-000259-GPOS-00100 | Severity: medium | CCI: | Vulnerability Id: V-269170
If AlmaLinux OS 9 allowed any user to make changes to software libraries, then those changes might be implemented without undergoing the appropriate testing and approvals that are part of a robust change management process.
This requirement applies to AlmaLinux OS 9 with software libraries that are accessible and configurable, as in the case of interpreted languages. Software libraries also include privileged programs that execute with escalated privileges.
Configure the system commands to be protected from unauthorized access.
Run the following command, replacing "[FILE]" with any system command file not owned by "root".
$ chown root [FILE]
Verify the system commands contained in the following directories are owned by "root" with the following command:
$ find -L /bin /sbin /usr/bin /usr/sbin /usr/libexec /usr/local/bin /usr/local/sbin ! -user root -exec ls -l {} \;
If any system commands are found to not be owned by root, this is a finding.
STIG ID: ALMA-09-010470 | SRG: SRG-OS-000259-GPOS-00100 | Severity: medium | CCI: | Vulnerability Id: V-269171
If AlmaLinux OS 9 allowed any user to make changes to software libraries, then those changes might be implemented without undergoing the appropriate testing and approvals that are part of a robust change management process.
This requirement applies to AlmaLinux OS 9 with software libraries that are accessible and configurable, as in the case of interpreted languages. Software libraries also include privileged programs that execute with escalated privileges.
Configure the system commands to be protected from unauthorized access.
Run the following command, replacing "[FILE]" with any system command with a mode more permissive than "755".
$ chmod 755 [FILE]
Verify the system commands contained in the following directories have mode "755" or less permissive with the following command:
$ find -L /bin /sbin /usr/bin /usr/sbin /usr/libexec /usr/local/bin /usr/local/sbin -perm /022 -exec ls -l {} \;
If any system commands are found to be group-writable or world-writable, this is a finding.
STIG ID: ALMA-09-010580 | SRG: SRG-OS-000259-GPOS-00100 | Severity: medium | CCI: | Vulnerability Id: V-269172
If AlmaLinux OS 9 allowed any user to make changes to software libraries, then those changes might be implemented without undergoing the appropriate testing and approvals that are part of a robust change management process.
This requirement applies to AlmaLinux OS 9 with software libraries that are accessible and configurable, as in the case of interpreted languages. Software libraries also include privileged programs that execute with escalated privileges.
Configure the systemwide shared library directories (/lib, /lib64, /usr/lib and /usr/lib64) to be protected from unauthorized access.
Run the following command, replacing "[DIRECTORY]" with any library directory not group-owned by "root".
$ chgrp root [DIRECTORY]
Verify the systemwide shared library directories are group-owned by "root" with the following command:
$ find -L /lib /lib64 /usr/lib /usr/lib64 ! -group root -type d -exec stat -c "%n %G" '{}' \;
If any systemwide shared library directory is returned and is not group owned by a required system account, this is a finding.
STIG ID: ALMA-09-010690 | SRG: SRG-OS-000259-GPOS-00100 | Severity: medium | CCI: | Vulnerability Id: V-269173
If AlmaLinux OS 9 allowed any user to make changes to software libraries, then those changes might be implemented without undergoing the appropriate testing and approvals that are part of a robust change management process.
This requirement applies to AlmaLinux OS 9 with software libraries that are accessible and configurable, as in the case of interpreted languages. Software libraries also include privileged programs that execute with escalated privileges.
Configure the systemwide shared library directories within (/lib, /lib64, /usr/lib and /usr/lib64) to be protected from unauthorized access.
Run the following command, replacing "[DIRECTORY]" with any library directory not owned by "root".
$ chown root [DIRECTORY]
Verify the systemwide shared library directories are owned by "root" with the following command:
$ find -L /lib /lib64 /usr/lib /usr/lib64 ! -user root -type d -exec stat -c "%n %U" '{}' \;
If any systemwide shared library directory is not owned by root, this is a finding.
STIG ID: ALMA-09-010800 | SRG: SRG-OS-000259-GPOS-00100 | Severity: medium | CCI: | Vulnerability Id: V-269174
If AlmaLinux OS 9 allowed any user to make changes to software libraries, then those changes might be implemented without undergoing the appropriate testing and approvals that are part of a robust change management process.
This requirement applies to AlmaLinux OS 9 with software libraries that are accessible and configurable, as in the case of interpreted languages. Software libraries also include privileged programs that execute with escalated privileges.
Configure the systemwide shared library directories (/lib, /lib64, /usr/lib and /usr/lib64) to be protected from unauthorized access.
Run the following command, replacing "[DIRECTORY]" with any library directory with a mode more permissive than 755.
$ chmod 755 [DIRECTORY]
Verify the systemwide shared library directories have mode "755" or less permissive with the following command:
$ find -L /lib /lib64 /usr/lib /usr/lib64 -perm /022 -type d -exec ls -l {} \;
If any systemwide shared library file is found to be group-writable or world-writable, this is a finding.
STIG ID: ALMA-09-010910 | SRG: SRG-OS-000259-GPOS-00100 | Severity: medium | CCI: | Vulnerability Id: V-269175
If AlmaLinux OS 9 allowed any user to make changes to software libraries, then those changes might be implemented without undergoing the appropriate testing and approvals that are part of a robust change management process.
This requirement applies to AlmaLinux OS 9 with software libraries that are accessible and configurable, as in the case of interpreted languages. Software libraries also include privileged programs that execute with escalated privileges.
Configure the systemwide shared library files (/lib, /lib64, /usr/lib and /usr/lib64) to be protected from unauthorized access.
Run the following command, replacing "[FILE]" with any library file not group-owned by "root".
$ chgrp root [FILE]
Verify the systemwide shared library files are group-owned by "root" with the following command:
$ find -L /lib /lib64 /usr/lib /usr/lib64 ! -group root -exec ls -l {} \;
If any systemwide shared library file is returned and is not group-owned by a required system account, this is a finding.
STIG ID: ALMA-09-011020 | SRG: SRG-OS-000259-GPOS-00100 | Severity: medium | CCI: | Vulnerability Id: V-269176
If AlmaLinux OS 9 allowed any user to make changes to software libraries, then those changes might be implemented without undergoing the appropriate testing and approvals that are part of a robust change management process.
This requirement applies to AlmaLinux OS 9 with software libraries that are accessible and configurable, as in the case of interpreted languages. Software libraries also include privileged programs that execute with escalated privileges.
Configure the systemwide shared library files (/lib, /lib64, /usr/lib and /usr/lib64) to be protected from unauthorized access.
Run the following command, replacing "[FILE]" with any library file not owned by "root".
$ chown root [FILE]
Verify the systemwide shared library files are owned by "root" with the following command:
$ find -L /lib /lib64 /usr/lib /usr/lib64 ! -user root -exec ls -l {} \;
If any systemwide shared library file is not owned by root, this is a finding.
STIG ID: ALMA-09-011130 | SRG: SRG-OS-000259-GPOS-00100 | Severity: medium | CCI: | Vulnerability Id: V-269177
If AlmaLinux OS 9 allowed any user to make changes to software libraries, then those changes might be implemented without undergoing the appropriate testing and approvals that are part of a robust change management process.
This requirement applies to AlmaLinux OS 9 with software libraries that are accessible and configurable, as in the case of interpreted languages. Software libraries also include privileged programs that execute with escalated privileges.
Configure the library files to be protected from unauthorized access. Run the following command, replacing "[FILE]" with any library file with a mode more permissive than 755.
$ chmod 755 [FILE]
Verify the systemwide shared library files contained in the following directories have mode "755" or less permissive with the following command:
$ find -L /lib /lib64 /usr/lib /usr/lib64 -perm /022 -type f -exec ls -l {} \;
If any systemwide shared library file is found to be group-writable or world-writable, this is a finding.
STIG ID: ALMA-09-011240 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269178
A core dump includes a memory image taken at the time the operating system terminates an application. The memory image could contain sensitive data and is generally useful only for developers or system operators trying to debug problems.
Enabling core dumps on production systems is not recommended; however, there may be overriding operational requirements to enable advanced debugging. Permitting temporary enablement of core dumps during such situations must be reviewed through local needs and policy.
Configure the operating system to disable core dumps for all users.
Create a *.conf file in /etc/security/limits.d/ with the following content:
* hard core 0
Verify AlmaLinux OS 9 disables core dumps for all users by issuing the following command:
$ grep -s core /etc/security/limits.conf /etc/security/limits.d/*.conf
/etc/security/limits.conf:# - core - limits the core file size (KB)
/etc/security/limits.conf:#* soft core 0
This can be set as a global domain (with the * wildcard) but may be set differently for multiple domains.
If the "core" item is missing, commented out, or the value is anything other than "0" and the need for core dumps is not documented with the information system security officer (ISSO) as an operational requirement for all domains that have the "core" item assigned, this is a finding.
STIG ID: ALMA-09-011350 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269179
A core dump includes a memory image taken at the time the operating system terminates an application. The memory image could contain sensitive data and is generally useful only for developers or system operators trying to debug problems.
Enabling core dumps on production systems is not recommended; however, there may be overriding operational requirements to enable advanced debugging. Permitting temporary enablement of core dumps during such situations must be reviewed through local needs and policy.
Configure the system to disable the systemd-coredump.socket with the following command:
$ systemctl mask --now systemd-coredump.socket
Create symlink /etc/systemd/system/systemd-coredump.socket -> /dev/null
Reload the daemon for this change to take effect.
$ systemctl daemon-reload
Verify AlmaLinux OS 9 is not configured to acquire, save, or process core dumps with the following command:
$ systemctl status systemd-coredump.socket
systemd-coredump.socket
Loaded: masked (Reason: Unit systemd-coredump.socket is masked.)
Active: inactive (dead) since Mon 2024-02-26 13:31:02 UTC; 26s ago
Duration: 3h 13min 22.428s
If the "systemd-coredump.socket" is loaded and not masked and the need for core dumps is not documented with the information system security officer (ISSO) as an operational requirement, this is a finding.
STIG ID: ALMA-09-011460 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269180
A core dump includes a memory image taken at the time the operating system terminates an application. The memory image could contain sensitive data and is generally useful only for developers or system operators trying to debug problems.
Enabling core dumps on production systems is not recommended; however, there may be overriding operational requirements to enable advanced debugging. Permitting temporary enablement of core dumps during such situations must be reviewed through local needs and policy.
Configure the operating system to disable storing core dumps for all users.
Add or modify the following line in the [Coredump} section of /etc/systemd/coredump.conf:
Storage=none
Verify AlmaLinux OS 9 disables storing core dumps for all users by issuing the following command:
$ systemd-analyze cat-config systemd/coredump.conf | grep Storage
Storage=none
If the "Storage" item is missing, commented out, or the value is anything other than "none" and the need for core dumps is not documented with the information system security officer (ISSO) as an operational requirement for all domains that have the "core" item assigned, this is a finding.
STIG ID: ALMA-09-011570 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269181
A core dump includes a memory image taken at the time the operating system terminates an application. The memory image could contain sensitive data and is generally useful only for developers or system operators trying to debug problems.
Enabling core dumps on production systems is not recommended; however, there may be overriding operational requirements to enable advanced debugging. Permitting temporary enablement of core dumps during such situations must be reviewed through local needs and policy.
Configure the operating system to disable core dump backtraces.
Add or modify the following line in the [Coredump} section of /etc/systemd/coredump.conf:
ProcessSizeMax=0
Verify AlmaLinux OS 9 disables core dump backtraces by issuing the following command:
$ systemd-analyze cat-config systemd/coredump.conf | grep ProcessSizeMax
ProcessSizeMax=0
If the "ProcessSizeMax" item is missing, commented out, or the value is anything other than "0" and the need for core dumps is not documented with the information system security officer (ISSO) as an operational requirement for all domains that have the "core" item assigned, this is a finding.
STIG ID: ALMA-09-011680 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269182
A core dump includes a memory image taken at the time the operating system terminates an application. The memory image could contain sensitive data and is generally useful only for developers trying to debug problems.
Configure AlmaLinux OS 9 to disable storing core dumps.
Create a numbered *.conf file in /etc/sysctl.d/ with the following content:
kernel.core_pattern = |/bin/false
The system configuration files need to be reloaded for the changes to take effect. To reload the contents of the files, run the following command:
$ sysctl –system
Verify AlmaLinux OS 9 disables storing core dumps with the following commands:
$ sysctl kernel.core_pattern
kernel.core_pattern = |/bin/false
If the returned line does not have a value of "|/bin/false", or a line is not returned and the need for core dumps is not documented with the information system security officer (ISSO) as an operational requirement, this is a finding.
Check that the configuration files are present to disable core dump storage.
$ /usr/lib/systemd/systemd-sysctl --cat-config | egrep -v '^(#|;)' | grep -F kernel.core_pattern | tail -1
kernel.core_pattern = |/bin/false
If "kernel.core_pattern" is not set to "|/bin/false" and is not documented with the ISSO as an operational requirement, or is missing, this is a finding.
STIG ID: ALMA-09-011790 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269183
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations; therefore, service configuration files must be owned by the correct group to prevent unauthorized changes.
Configure any cron configuration not group-owned by root with the following command:
$ chgrp root [cron config file]
Verify the group ownership of all cron configuration files with the following command:
$ stat -c "%G %n" /etc/cron*
root /etc/cron.d
root /etc/cron.daily
root /etc/cron.deny
root /etc/cron.hourly
root /etc/cron.monthly
root /etc/crontab
root /etc/cron.weekly
If any crontab is not group owned by root, this is a finding.
STIG ID: ALMA-09-011900 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269184
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations; therefore, service configuration files must be owned by the correct group to prevent unauthorized changes.
Configure any cron configuration not owned by root with the following command:
$ chown root [cron config file]
Verify the ownership of all cron configuration files with the command:
$ stat -c "%U %n" /etc/cron*
root /etc/cron.d
root /etc/cron.daily
root /etc/cron.deny
root /etc/cron.hourly
root /etc/cron.monthly
root /etc/crontab
root /etc/cron.weekly
If any crontab is not owned by root, this is a finding.
STIG ID: ALMA-09-012010 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269185
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should have the correct access rights to prevent unauthorized changes.
Configure any AlmaLinux OS 9 cron configuration directory with a mode more permissive than "0700" as follows:
chmod 0700 [cron configuration directory]
Verify the permissions of the cron directories with the following command:
$ find /etc/cron* -type d | xargs stat -c "%#a %n"
0700 /etc/cron.d
0700 /etc/cron.daily
0700 /etc/cron.hourly
0700 /etc/cron.monthly
0700 /etc/cron.weekly
If any cron configuration directory is more permissive than "700", this is a finding.
STIG ID: ALMA-09-012120 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269186
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations; therefore, service configuration files must have the correct access rights to prevent unauthorized changes.
Configure the AlmaLinux OS 9 file /etc/crontab with mode 600.
$ chmod 0600 /etc/crontab
Verify the permissions of /etc/crontab with the following command:
$ stat -c "%#a %n" /etc/crontab
0600
If /etc/crontab does not have a mode of "0600", this is a finding.
STIG ID: ALMA-09-012230 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269187
A locally logged-in user who presses Ctrl-Alt-Del, when at the console, can reboot the system. If accidentally pressed, as could happen in the case of mixed OS environment, this can create the risk of short-term loss of availability of systems due to unintentional reboot.
Configure AlmaLinux OS 9 to ignore the Ctrl-Alt-Del sequence in the GNOME desktop.
Add or update the [org/gnome/settings-daemon/plugins/media-keys] section of the /etc/dconf/db/local.d/00-security-settings database file and add or update the following lines:
[org/gnome/settings-daemon/plugins/media-keys]
logout=['']
Run the following command to update the database:
$ dconf update
Note: This requirement assumes the use of the AlmaLinux OS 9 default graphical user interface, the GNOME desktop environment. If the system does not have any graphical user interface installed, this requirement is Not Applicable.
Verify AlmaLinux OS 9 is configured to ignore the Ctrl-Alt-Del sequence in the GNOME desktop with the following command:
$ gsettings get org.gnome.settings-daemon.plugins.media-keys logout
"['']"
If the GNOME desktop is configured to shut down when Ctrl-Alt-Del is pressed, this is a finding.
STIG ID: ALMA-09-012340 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269188
A locally logged-in user who presses Ctrl-Alt-Del, when at the console, can reboot the system. If accidentally pressed, as could happen in the case of mixed OS environment, this can create the risk of short-term loss of availability of systems due to unintentional reboot.
Configure AlmaLinux OS 9 to disallow the user changing the Ctrl-Alt-Del sequence in the GNOME desktop.
Create a database to container systemwide graphical user logon settings (if it does not already exist) with the following command:
$ touch /etc/dconf/db/local.d/locks/session
Add the following line to the session locks file to prevent nonprivileged users from modifying the Ctrl-Alt-Del setting:
/org/gnome/settings-daemon/plugins/media-keys/logout
Run the following command to update the database:
$ dconf update
Note: This requirement assumes the use of the AlmaLinux OS 9 default graphical user interface, the GNOME desktop environment. If the system does not have any graphical user interface installed, this requirement is Not Applicable.
Verify that users cannot enable the Ctrl-Alt-Del sequence in the GNOME desktop with the following command:
$ grep logout /etc/dconf/db/local.d/locks/*
/org/gnome/settings-daemon/plugins/media-keys/logout
If the output is not "/org/gnome/settings-daemon/plugins/media-keys/logout", the line is commented out, or the line is missing, this is a finding.
STIG ID: ALMA-09-012450 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269189
Files without a valid group owner may be unintentionally inherited if a group is assigned the same Group Identifier (GID) as the GID of the files without a valid group owner.
Either remove all files and directories from AlmaLinux OS 9 that do not have a valid group, or assign a valid group to all files and directories on the system with the "chgrp" command:
$ chgrp
Verify all local files and directories on AlmaLinux OS 9 have a valid group with the following command:
$ df --local -P | awk {'if (NR!=1) print $6'} | xargs -I '{}' find '{}' -xdev -nogroup
If any files on the system do not have an assigned group, this is a finding.
STIG ID: ALMA-09-012560 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269190
Unowned files and directories may be unintentionally inherited if a user is assigned the same user identifier "UID" as the UID of the unowned files.
Either remove all files and directories from the system that do not have a valid user, or assign a valid user to all unowned files and directories on AlmaLinux OS 9 with the "chown" command:
$ chown
Verify all local files and directories on AlmaLinux OS 9 have a valid owner with the following command:
$ df --local -P | awk {'if (NR!=1) print $6'} | xargs -I '{}' find '{}' -xdev -nouser
If any files on the system do not have an assigned owner, this is a finding.
STIG ID: ALMA-09-012670 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269191
The "/etc/group-" file is a backup file of "/etc/group", and as such, contains information regarding groups that are configured on the system. Protection of this file is important for system security.
Change the group of the file /etc/group- to root by running the following command:
$ chgrp root /etc/group-
Verify the group ownership of the "/etc/group-" file with the following command:
$ stat -c "%G %n" /etc/group-
root /etc/group-
If "/etc/group-" file does not have a group owner of "root", this is a finding.
STIG ID: ALMA-09-012780 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269192
The "/etc/group-" file is a backup file of "/etc/group", and as such, contains information regarding groups that are configured on the system. Protection of this file is important for system security.
Change the owner of the file /etc/group- to root by running the following command:
$ chown root /etc/group-
Verify the ownership of the "/etc/group-" file with the following command:
$ stat -c "%U %n" /etc/group-
root /etc/group-
If "/etc/group-" file does not have an owner of "root", this is a finding.
STIG ID: ALMA-09-012890 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269193
The "/etc/group-" file is a backup file of "/etc/group", and as such, contains information regarding groups that are configured on the system. Protection of this file is important for system security.
Change the mode of the file "/etc/group-" to "0644" by running the following command:
$ chmod 0644 /etc/group-
Verify that the "/etc/group-" file has mode "0644" or less permissive with the following command:
$ stat -c "%#a %n" /etc/group-
0644 /etc/group-
If a value of "0644" or less permissive is not returned, this is a finding.
STIG ID: ALMA-09-013000 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269194
The "/etc/group" file contains information regarding groups that are configured on the system. Protection of this file is important for system security.
Change the group of the file /etc/group to root by running the following command:
$ chgrp root /etc/group
Verify the group ownership of the "/etc/group" file with the following command:
$ stat -c "%G %n" /etc/group
root /etc/group
If "/etc/group" file does not have a group owner of "root", this is a finding.
STIG ID: ALMA-09-013110 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269195
The "/etc/group" file contains information regarding groups that are configured on the system. Protection of this file is important for system security.
Change the owner of the file /etc/group to root by running the following command:
$ chown root /etc/group
Verify the ownership of the "/etc/group" file with the following command:
$ stat -c "%U %n" /etc/group
root /etc/group
If "/etc/group" file does not have an owner of "root", this is a finding.
STIG ID: ALMA-09-013220 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269196
The "/etc/group" file contains information regarding groups that are configured on the system. Protection of this file is important for system security.
Change the mode of the file "/etc/group" to "0644" by running the following command:
$ chmod 0644 /etc/group
Verify that the "/etc/group" file has mode "0644" or less permissive with the following command:
$ stat -c "%#a %n" /etc/group
0644 /etc/group
If a value of "0644" or less permissive is not returned, this is a finding.
STIG ID: ALMA-09-013330 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269197
The "root" group is a highly privileged group. Furthermore, the group-owner of this file should not have any access privileges anyway.
Change the group of the file /boot/grub2/grub.cfg to root by running the following command:
$ chgrp root /boot/grub2/grub.cfg
Verify the group ownership of the "/boot/grub2/grub.cfg" file with the following command:
$ stat -c "%G %n" /boot/grub2/grub.cfg
root /boot/grub2/grub.cfg
If "/boot/grub2/grub.cfg" file does not have a group owner of "root", this is a finding.
STIG ID: ALMA-09-013440 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269198
The "/boot/grub2/grub.cfg" file stores sensitive system configuration. Protection of this file is critical for system security.
Change the owner of the file /boot/grub2/grub.cfg to root by running the following command:
$ chown root /boot/grub2/grub.cfg
Verify the ownership of the "/boot/grub2/grub.cfg" file with the following command:
$ stat -c "%U %n" /boot/grub2/grub.cfg
root /boot/grub2/grub.cfg
If "/boot/grub2/grub.cfg" file does not have an owner of "root", this is a finding.
STIG ID: ALMA-09-013550 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269199
Using interactive or recovery boot, the console user could disable auditing, firewalls, or other services, weakening system security.
Configure AlmaLinux OS 9 to disable the ability of systemd to spawn an interactive boot process with the following command:
$ grubby --update-kernel=ALL --remove-args="systemd.confirm_spawn"
Verify that GRUB 2 is configured to disable interactive boot.
Check that the current GRUB 2 configuration disables the ability of systemd to spawn an interactive boot process with the following command:
$ grubby --info=ALL | grep args | grep 'systemd.confirm_spawn'
If any output is returned, this is a finding.
STIG ID: ALMA-09-013660 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269200
The "/etc/gshadow-" file is a backup of "/etc/gshadow", and as such, contains group password hashes. Protection of this file is critical for system security.
Change the group of the file /etc/gshadow- to root by running the following command:
$ chgrp root /etc/gshadow-
Verify the group ownership of the "/etc/gshadow-" file with the following command:
$ stat -c "%G %n" /etc/gshadow-
root /etc/gshadow-
If "/etc/gshadow-" file does not have a group owner of "root", this is a finding.
STIG ID: ALMA-09-013770 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269201
The "/etc/gshadow-" file is a backup of "/etc/gshadow", and as such, contains group password hashes. Protection of this file is critical for system security.
Change the owner of the file /etc/gshadow- to root by running the following command:
$ chown root /etc/gshadow-
Verify the ownership of the "/etc/gshadow-" file with the following command:
$ stat -c "%U %n" /etc/gshadow-
root /etc/gshadow-
If "/etc/gshadow-" file does not have an owner of "root", this is a finding.
STIG ID: ALMA-09-013880 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269202
The "/etc/gshadow-" file is a backup of "/etc/gshadow", and as such, contains group password hashes. Protection of this file is critical for system security.
Change the mode of the file "/etc/gshadow-" to "0000" by running the following command:
$ chmod 0000 /etc/gshadow-
Verify that the "/etc/gshadow-" file has mode "0000" with the following command:
$ stat -c "%a %n" /etc/gshadow-
0 /etc/gshadow-
If a value of "0" is not returned, this is a finding.
STIG ID: ALMA-09-013990 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269203
The "/etc/gshadow" file contains group password hashes. Protection of this file is critical for system security.
Change the group of the file /etc/gshadow to root by running the following command:
$ chgrp root /etc/gshadow
Verify the group ownership of the "/etc/gshadow" file with the following command:
$ stat -c "%G %n" /etc/gshadow
root /etc/gshadow
If "/etc/gshadow" file does not have a group owner of "root", this is a finding.
STIG ID: ALMA-09-014100 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269204
The "/etc/gshadow" file contains group password hashes. Protection of this file is critical for system security.
Change the owner of the file /etc/gshadow to root by running the following command:
$ chown root /etc/gshadow
Verify the ownership of the "/etc/gshadow" file with the following command:
$ stat -c "%U %n" /etc/gshadow
root /etc/gshadow
If "/etc/gshadow" file does not have an owner of "root", this is a finding.
STIG ID: ALMA-09-014210 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269205
The "/etc/gshadow" file contains group password hashes. Protection of this file is critical for system security.
Change the mode of the file "/etc/gshadow" to "0000" by running the following command:
$ chmod 0000 /etc/gshadow
Verify that the "/etc/gshadow" file has mode "0000" with the following command:
$ stat -c "%a %n" /etc/gshadow
0 /etc/gshadow
If a value of "0" is not returned, this is a finding.
STIG ID: ALMA-09-014320 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269206
Unnecessary service packages must not be installed to decrease the attack surface of the system.
Graphical display managers have a long history of security vulnerabilities and must not be used, unless approved and documented.
Document the requirement for a graphical user interface with the ISSO or set the default target to multi-user with the following command:
$ systemctl set-default multi-user.target
Verify that AlmaLinux OS 9 is configured to boot to the command line:
$ systemctl get-default
multi-user.target
If the system default target is not set to "multi-user.target" and the information system security officer (ISSO) lacks a documented requirement for a graphical user interface, this is a finding.
STIG ID: ALMA-09-014430 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269207
Leaving the user list enabled is a security risk since it allows anyone with physical access to the system to enumerate known user accounts without authenticated access to the system.
Configure AlmaLinux OS 9 to disable the user list at logon for graphical user interfaces.
Create a database to contain the systemwide screensaver settings (if it does not already exist) with the following command:
Note: The example below is using the database "local" for the system, so if the system is using another database in "/etc/dconf/profile/user", the file should be created under the appropriate subdirectory.
$ touch /etc/dconf/db/local.d/02-login-screen
[org/gnome/login-screen]
disable-user-list=true
Update the system databases:
$ dconf update
Verify that AlmaLinux OS 9 disables the user logon list for graphical user interfaces with the following command:
Note: This requirement assumes the use of the AlmaLinux OS 9 default graphical user interface, the GNOME desktop environment. If the system does not have any graphical user interface installed, this requirement is Not Applicable.
$ gsettings get org.gnome.login-screen disable-user-list
true
If the setting is "false", this is a finding.
STIG ID: ALMA-09-014540 | SRG: SRG-OS-000480-GPOS-00230 | Severity: medium | CCI: | Vulnerability Id: V-269208
If local interactive users are not assigned a valid home directory, there is no place for the storage and control of files they should own.
Configure AlmaLinux OS 9 to assign home directories to all new local interactive users by setting the "CREATE_HOME" parameter in "/etc/login.defs" to "yes" as follows:
CREATE_HOME yes
Verify all local interactive users on AlmaLinux OS 9 are assigned a home directory upon creation with the following command:
$ grep CREATE_HOME /etc/login.defs
CREATE_HOME yes
If the value for "CREATE_HOME" parameter is not set to "yes", the line is missing, or the line is commented out, this is a finding.
STIG ID: ALMA-09-014650 | SRG: SRG-OS-000480-GPOS-00230 | Severity: medium | CCI: | Vulnerability Id: V-269209
If a local interactive user has a home directory defined that does not exist, the user may be given access to the / directory as the current working directory upon logon.
This could create a denial of service because the user would not be able to access their logon configuration files, and it may give them visibility to system files they normally would not be able to access.
Create home directories to all local interactive users that currently do not have a home directory assigned. Use the following commands to create the user home directory assigned in "/etc/ passwd":
Note: The example will be for the user testdupe, who has a home directory of "/home/testdupe", a UID of "testdupe", and a GID of "testdupe" in "/etc/passwd":
$ mkdir /home/testdupe
$ chown testdupe /home/testdupe
$ chgrp testdupe /home/testdupe
$ chmod 0700 /home/testdupe
Verify the assigned home directories of all interactive users on the system exist with the following command:
$ pwck -r
user 'testdupe': directory '/home/testdupe' does not exist
The output should not return any interactive users.
If users home directory does not exist, this is a finding.
STIG ID: ALMA-09-014760 | SRG: SRG-OS-000480-GPOS-00230 | Severity: medium | CCI: | Vulnerability Id: V-269210
If the Group Identifier (GID) of a local interactive users home directory is not the same as the primary GID of the user, this would allow unauthorized access to the users files, and users that share the same group may not be able to access files that they legitimately should.
Change the group owner of a local interactive user's home directory to the group found in "/etc/passwd". To change the group owner of a local interactive user's home directory, use the following command:
Note: The example will be for the user "test", who has a home directory of "/home/test", and has a primary group of "test".
$ chgrp test /home/test
Verify the assigned home directory of all local interactive users is group-owned by that user's primary GID with the following command:
Note: This may miss local interactive users that have been assigned a privileged UID. Evidence of interactive use may be obtained from a number of log files containing system logon information. The returned directory "/home/test" is used as an example.
$ stat --format="%n: GID=%g (%G), UID=%u (%U), MODE=%0.4a" $(awk -F: '($3>=1000)&&($7 !~ /nologin/){print $6}' /etc/passwd)
/home/test: GID=1001 (test), UID=1001 (test), MODE=0700
Check the user's primary group with the following command:
$ grep $(grep -E '^test:' /etc/passwd | awk -F: '{print $4}') /etc/group
test:x:1001:
If the user home directory referenced in "/etc/passwd" is not group-owned by that user's primary GID (1001 in the above example) this is a finding.
STIG ID: ALMA-09-014870 | SRG: SRG-OS-000480-GPOS-00230 | Severity: medium | CCI: | Vulnerability Id: V-269211
The "noexec" mount option causes the system to not execute binary files.
This option must be used for mounting any file system not containing approved binary files, as they may be incompatible.
Executing files from untrusted file systems increases the opportunity for nonprivileged users to attain unauthorized administrative access.
Modify "/etc/fstab" to use the "noexec" option on the "/home" directory.
Verify "/home" is mounted with the "noexec" option with the following command:
Note: If a separate file system has not been created for the user home directories (user home directories are mounted under "/"), this is automatically a finding, as the "noexec" option cannot be used on the "/" system.
$ mount | grep /home
/dev/mapper/luks-10a20c46-483d-4d12-831f-5328eda18fd1 on /home type xfs (rw,noexec,nosuid,nodev,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota)
If the "/home" file system is mounted without the "noexec" option, this is a finding.
STIG ID: ALMA-09-014980 | SRG: SRG-OS-000480-GPOS-00230 | Severity: medium | CCI: | Vulnerability Id: V-269212
Ensuring that "/home" is mounted on its own partition enables the setting of more restrictive mount options, and also helps ensure that users cannot trivially fill partitions used for log or audit data storage.
Migrate the "/home" directory onto a separate file system/partition.
Verify that a separate file system/partition has been created for "/home" with the following command:
$ mount | grep /home
/dev/mapper/luks-10a20c46-483d-4d12-831f-5328eda18fd1 on /home type xfs (rw,nosuid,nodev,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota)
If a separate entry for "/home" is not in use, this is a finding.
STIG ID: ALMA-09-015090 | SRG: SRG-OS-000480-GPOS-00230 | Severity: medium | CCI: | Vulnerability Id: V-269213
If local interactive users are not assigned a valid home directory, there is no place for the storage and control of files they should own.
Create and assign home directories to all local interactive users on AlmaLinux OS 9 that currently do not have a home directory assigned.
Verify that interactive users on the system have a home directory assigned with the following command:
$ awk -F: '($3>=1000)&&($7 !~ /nologin/){print $1, $6}' /etc/passwd
simon /home/simon
test /home/test
testdupe /home/testdupe
Inspect the output and verify that all interactive users (normally users with a UID greater that 1000) have a home directory defined.
If users home directory is not defined, this is a finding.
STIG ID: ALMA-09-015200 | SRG: SRG-OS-000480-GPOS-00230 | Severity: medium | CCI: | Vulnerability Id: V-269214
The executable search path (typically the $PATH environment variable) contains a list of directories for the shell to search to find executables. If this path includes the current working directory (other than the users home directory), executables in these directories may be executed instead of system commands.
This variable is formatted as a colon-separated list of directories. If there is an empty entry, such as a leading or trailing colon or two consecutive colons, this is interpreted as the current working directory. If deviations from the default system search path for the local interactive user are required, they must be documented with the information system security officer (ISSO).
Edit the local interactive user initialization files to change any PATH variable statements that reference directories other than their home directory.
If a local interactive user requires path variables to reference a directory owned by the application, it must be documented with the ISSO.
Verify that all local interactive user initialization file executable search path statements do not contain statements that will reference a working directory other than user home directories with the following commands:
$ grep -i path= /home/*/.*
grep -i path= /home/*/.* 2>/dev/null
/home/simon/.bashrc: PATH="$HOME/.local/bin:$HOME/bin:$PATH"
/home/test/.bashrc: PATH="$HOME/.local/bin:$HOME/bin:$PATH"
If any local interactive user initialization files have executable search path statements that include directories outside of their home directory and is not documented with the ISSO as an operational requirement, this is a finding.
STIG ID: ALMA-09-015310 | SRG: SRG-OS-000480-GPOS-00230 | Severity: medium | CCI: | Vulnerability Id: V-269215
Excessive permissions on local interactive user home directories may allow unauthorized access to user files by other users.
Change the mode of interactive user's home directories to "0750". To change the mode of a local interactive user's home directory, use the following command:
Note: The example will be for the user "test".
$ chmod 0750 /home/test
Note: This may miss interactive users that have been assigned a privileged user identifier (UID). Evidence of interactive use may be obtained from a number of log files containing system logon information.
Verify the assigned home directory of all local interactive users has a mode of "0750" or less permissive with the following command:
$ ls -ld $(awk -F: '($3>=1000)&&($7 !~ /nologin/){print $6}' /etc/passwd)
drwx------. 2 simon simon 83 Nov 30 12:30 /home/simon
drwx------. 2 test test 83 Jan 19 14:18 /home/test
drwx------. 2 test testdupe 62 Jan 15 11:44 /home/testdupe
If home directories referenced in "/etc/passwd" do not have a mode of "0750" or less permissive, this is a finding.
STIG ID: ALMA-09-015420 | SRG: SRG-OS-000480-GPOS-00229 | Severity: high | CCI: | Vulnerability Id: V-269216
Failure to restrict system access to authenticated users negatively impacts operating system security.
Configure the GNOME desktop display manager to disable automatic login.
Set AutomaticLoginEnable to false in the [daemon] section in /etc/gdm/custom.conf. For example:
[daemon]
AutomaticLoginEnable=false
Note: This requirement assumes the use of the AlmaLinux OS 9 default graphical user interface, the GNOME desktop environment. If the system does not have any graphical user interface installed, this requirement is Not Applicable.
Verify AlmaLinux OS 9 does not allow an unattended or automatic logon to the system via a graphical user interface.
Check for the value of the "AutomaticLoginEnable" in the "/etc/gdm/custom.conf" file with the following command:
$ grep -i automaticlogin /etc/gdm/custom.conf
[daemon]
AutomaticLoginEnable=false
If the value of "AutomaticLoginEnable" is not set to "false", this is a finding.
STIG ID: ALMA-09-015640 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269217
Increasing the time between a failed authentication attempt and prompting to re-enter credentials helps to slow a single-threaded brute force attack.
Satisfies: SRG-OS-000480-GPOS-00227, SRG-OS-000480-GPOS-00226
Configure the AlmaLinux OS 9 to enforce a delay of at least four seconds between logon prompts following a failed console logon attempt.
Modify the "/etc/login.defs" file to set the "FAIL_DELAY" parameter to 4 or greater:
FAIL_DELAY 4
Verify AlmaLinux OS 9 enforces a delay of at least four seconds between console logon prompts following a failed logon attempt with the following command:
$ grep -i fail_delay /etc/login.defs
FAIL_DELAY 4
If the value of "FAIL_DELAY" is not set to "4" or greater, or the line is commented out, this is a finding.
STIG ID: ALMA-09-015750 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269218
If an account has an empty password, anyone could log in and run commands with the privileges of that account. Accounts with empty passwords should never be used in operational environments.
Remove any instances of the "nullok" option in the "/etc/pam.d/password-auth" and "/etc/pam.d/system-auth" files to prevent logons with empty passwords.
Note: Manual changes to the listed file may be overwritten by the "authselect" program.
Verify that null passwords cannot be used with the following command:
$ grep -i nullok /etc/pam.d/system-auth /etc/pam.d/password-auth
If output is produced, this is a finding.
If the system administrator (SA) can demonstrate that the required configuration is contained in a PAM configuration file included or substacked from the system-auth file, this is not a finding.
STIG ID: ALMA-09-015860 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269219
If an account has an empty password, anyone could log in and run commands with the privileges of that account. Accounts with empty passwords should never be used in operational environments.
Configure all accounts on AlmaLinux OS 9 to have a password or lock the account with the following commands:
Perform a password reset:
$ passwd [username]
To lock an account:
$ passwd -l [username]
Verify that null or blank passwords cannot be used with the following command:
$ awk -F: '!$2 {print $1}' /etc/shadow
If the command returns any results, this is a finding.
STIG ID: ALMA-09-015970 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269220
The "/etc/passwd-" file is a backup file of "/etc/passwd", and as such, contains information about the users that are configured on the system. Protection of this file is critical for system security.
Change the group of the file /etc/passwd- to root by running the following command:
$ chgrp root /etc/passwd-
Verify the group ownership of the "/etc/passwd-" file with the following command:
$ stat -c "%G %n" /etc/passwd-
root /etc/passwd-
If "/etc/passwd-" file does not have a group owner of "root", this is a finding.
STIG ID: ALMA-09-016080 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269221
The "/etc/passwd-" file is a backup file of "/etc/passwd", and as such, contains information about the users that are configured on the system. Protection of this file is critical for system security.
Change the owner of the file /etc/passwd- to root by running the following command:
$ chown root /etc/passwd-
Verify the ownership of the "/etc/passwd-" file with the following command:
$ stat -c "%U %n" /etc/passwd-
root /etc/passwd-
If "/etc/passwd-" file does not have an owner of "root", this is a finding.
STIG ID: ALMA-09-016190 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269222
The "/etc/passwd-" file is a backup file of "/etc/passwd", and as such, contains information about the users that are configured on the system. Protection of this file is critical for system security.
Change the mode of the file "/etc/passwd-" to "0644" by running the following command:
$ chmod 0644 /etc/passwd-
Verify that the "/etc/passwd-" file has mode "0644" or less permissive with the following command:
$ stat -c "%#a %n" /etc/passwd-
0644 /etc/passwd-
If a value of "0644" or less permissive is not returned, this is a finding.
STIG ID: ALMA-09-016300 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269223
The "/etc/passwd" file contains information about the users that are configured on the system. Protection of this file is critical for system security.
Change the group of the file /etc/passwd to root by running the following command:
$ chgrp root /etc/passwd
Verify the group ownership of the "/etc/passwd" file with the following command:
$ stat -c "%G %n" /etc/passwd
root /etc/passwd
If "/etc/passwd" file does not have a group owner of "root", this is a finding.
STIG ID: ALMA-09-016410 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269224
The "/etc/passwd" file contains information about the users that are configured on the system. Protection of this file is critical for system security.
Change the owner of the file /etc/passwd to root by running the following command:
$ chown root /etc/passwd
Verify the ownership of the "/etc/passwd" file with the following command:
$ stat -c "%U %n" /etc/passwd
root /etc/passwd
If "/etc/passwd" file does not have an owner of "root", this is a finding.
STIG ID: ALMA-09-016520 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269225
If the "/etc/passwd" file is writable by a group-owner or the world the risk of its compromise is increased.
The file contains the list of accounts on the system and associated information, and protection of this file is critical for system security.
Change the mode of the file "/etc/passwd" to "0644" by running the following command:
$ chmod 0644 /etc/passwd
Verify that the "/etc/passwd" file has mode "0644" or less permissive with the following command:
$ stat -c "%#a %n" /etc/passwd
0644 /etc/passwd
If a value of "0644" or less permissive is not returned, this is a finding.
STIG ID: ALMA-09-016630 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269226
The "/etc/shadow-" file is a backup file of "/etc/shadow", and as such, contains the list of local system accounts and password hashes. Protection of this file is critical for system security.
Change the group of the file /etc/shadow- to root by running the following command:
$ chgrp root /etc/shadow-
Verify the group ownership of the "/etc/shadow-" file with the following command:
$ stat -c "%G %n" /etc/shadow-
root /etc/shadow-
If "/etc/shadow-" file does not have a group owner of "root", this is a finding.
STIG ID: ALMA-09-016740 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269227
The "/etc/shadow-" file is a backup file of "/etc/shadow", and as such, contains the list of local system accounts and password hashes. Protection of this file is critical for system security.
Change the owner of the file /etc/shadow- to root by running the following command:
$ chown root /etc/shadow-
Verify the ownership of the "/etc/shadow-" file with the following command:
$ stat -c "%U %n" /etc/shadow-
root /etc/shadow-
If "/etc/shadow-" file does not have an owner of "root", this is a finding.
STIG ID: ALMA-09-016850 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269228
The "/etc/shadow-" file is a backup file of "/etc/shadow", and as such, contains the list of local system accounts and password hashes. Protection of this file is critical for system security.
Change the mode of the file "/etc/shadow-" to "0000" by running the following command:
$ chmod 0000 /etc/shadow-
Verify that the "/etc/shadow-" file has mode "0000" with the following command:
$ stat -c "%a %n" /etc/shadow-
0 /etc/shadow-
If a value of "0" is not returned, this is a finding.
STIG ID: ALMA-09-016960 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269229
The "/etc/shadow" file contains the list of local system accounts and stores password hashes. Protection of this file is critical for system security.
Failure to give ownership of this file to root provides the designated owner with access to sensitive information, which could weaken the system security posture.
Change the group of the file /etc/shadow to root by running the following command:
$ chgrp root /etc/shadow
Verify the group ownership of the "/etc/shadow" file with the following command:
$ stat -c "%G %n" /etc/shadow
root /etc/shadow
If "/etc/shadow" file does not have a group owner of "root", this is a finding.
STIG ID: ALMA-09-017070 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269230
The "/etc/shadow" file contains the list of local system accounts and stores password hashes. Protection of this file is critical for system security.
Failure to give ownership of this file to root provides the designated owner with access to sensitive information, which could weaken the system security posture.
Change the owner of the file /etc/shadow to root by running the following command:
$ chown root /etc/shadow
Verify the ownership of the "/etc/shadow" file with the following command:
$ stat -c "%U %n" /etc/shadow
root /etc/shadow
If "/etc/shadow" file does not have an owner of "root", this is a finding.
STIG ID: ALMA-09-017180 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269231
The "/etc/shadow" file contains the list of local system accounts and stores password hashes. Protection of this file is critical for system security. Failure to give ownership of this file to root provides the designated owner with access to sensitive information, which could weaken the system security posture.
Change the mode of the file "/etc/shadow" to "0000" by running the following command:
$ chmod 0000 /etc/shadow
Verify that the "/etc/shadow" file has mode "0000" with the following command:
$ stat -c "%a %n" /etc/shadow
0 /etc/shadow
If a value of "0" is not returned, this is a finding.
STIG ID: ALMA-09-017290 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269232
If the "sudoers" file is not configured correctly, any user defined on the system can initiate privileged actions on the target system.
Remove the following entries from the /etc/sudoers file or configuration files under /etc/sudoers.d/ (including NOPASSWD equivalents):
ALL ALL=(ALL) ALL
ALL ALL=(ALL:ALL) ALL
Verify AlmaLinux OS 9 restricts privilege elevation to authorized personnel with the following command:
$ grep -w ALL /etc/sudoers /etc/sudoers.d/* | grep -v '#'
/etc/sudoers:root ALL=(ALL) ALL
/etc/sudoers:%wheel ALL=(ALL) NOPASSWD: ALL
If the either of the following entries are returned, including their NOPASSWD equivalents, this is a finding:
ALL ALL=(ALL) ALL
ALL ALL=(ALL:ALL) ALL
STIG ID: ALMA-09-017400 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269233
If the rootpw, targetpw, or runaspw flags are defined and not disabled, by default the operating system will prompt the invoking user for the "root" user password.
Define the following in the Defaults section of the /etc/sudoers file or a single configuration file in the /etc/sudoers.d/ directory:
Defaults !targetpw
Defaults !rootpw
Defaults !runaspw
Verify that the sudoers security policy is configured to use the invoking user's password for privilege escalation with the following command:
$ grep -E '(!rootpw|!targetpw|!runaspw)' /etc/sudoers /etc/sudoers.d/* | grep -v '#'
/etc/sudoers.d/01_stig:Defaults !targetpw
/etc/sudoers.d/01_stig:Defaults !rootpw
/etc/sudoers.d/01_stig:Defaults !runaspw
If no results are returned, this is a finding.
If results are returned from more than one file location, this is a finding.
If "Defaults !targetpw" is not defined, this is a finding.
If "Defaults !rootpw" is not defined, this is a finding.
If "Defaults !runaspw" is not defined, this is a finding.
STIG ID: ALMA-09-017510 | SRG: SRG-OS-000480-GPOS-00228 | Severity: medium | CCI: | Vulnerability Id: V-269234
Setting the most restrictive default permissions ensures that when new accounts are created they do not have unnecessary access.
With a UMASK of 077, files will be created with 0600 permissions (owner read/write only) and directories will have 0700 permissions (owner read/write/execute only).
Remove the umask statement from all local interactive user's initialization files.
If the account is for an application, the requirement for a umask less restrictive than "077" can be documented with the information system security officer (ISSO), but the user agreement for access to the account must specify that the local interactive user must first log on to their account and then switch the user to the application account with the correct option to gain the account's environment variables.
Verify that the default umask for all local interactive users is "077".
Identify the locations of all local interactive user home directories by looking at the "/etc/passwd" file.
Check all local interactive user initialization files for interactive users with the following command:
Note: The example is for a system that is configured to create users home directories in the "/home" directory.
$ grep -ir umask /home | grep -v '.bash_history'
If any local interactive user initialization files are found to have a umask statement that sets a value less restrictive than "077", this is a finding.
STIG ID: ALMA-09-017620 | SRG: SRG-OS-000480-GPOS-00228 | Severity: medium | CCI: | Vulnerability Id: V-269235
Setting the most restrictive default permissions ensures that when new accounts are created they do not have unnecessary access.
With a UMASK of 077, files will be created with 0600 permissions (owner read/write only) and directories will have 0700 permissions (owner read/write/execute only).
Configure AlmaLinux OS 9 to define default permissions for all authenticated users in such a way that the user can only read and modify their own files.
Add or edit the lines for the "UMASK" parameter in the "/etc/login.defs" file to "077":
UMASK 077
Verify AlmaLinux OS 9 defines default permissions for all authenticated users in such a way that the user can only read and modify their own files with the following command:
Note: If the value of the "UMASK" parameter is set to "000" in the "/etc/login.defs" file, the severity is raised to a CAT I.
$ grep UMASK /etc/login.defs
UMASK 077
If the value for the "UMASK" parameter is not "077", or the "UMASK" parameter is missing or is commented out, this is a finding.
STIG ID: ALMA-09-017730 | SRG: SRG-OS-000480-GPOS-00228 | Severity: medium | CCI: | Vulnerability Id: V-269236
Setting the most restrictive default permissions ensures that when new accounts are created they do not have unnecessary access.
With a UMASK of 077, files will be created with 0600 permissions (owner read/write only) and directories will have 0700 permissions (owner read/write/execute only).
Configure AlmaLinux OS 9 to define default permissions for all authenticated users so the user can only read and modify their own files.
Add or edit the following line at the top of /etc/pam.d/postlogin:
session optional pam_umask.so silent
Verify that the "pam_umask" module is enabled with the following command:
$ grep -i umask /etc/pam.d/*
/etc/pam.d/postlogin:session optional pam_umask.so silent umask=0022
If a "pam_umask.so" line is not returned, this is a finding.
If the "umask" setting is set to anything other than "0077", this is a finding.
Note: If the "umask" setting is not found, it will use the default UMASK entry in /etc/login.defs.
STIG ID: ALMA-09-017840 | SRG: SRG-OS-000480-GPOS-00228 | Severity: medium | CCI: | Vulnerability Id: V-269237
Setting the most restrictive default permissions ensures that when new accounts are created they do not have unnecessary access.
With a UMASK of 077, files will be created with 0600 permissions (owner read/write only) and directories will have 0700 permissions (owner read/write/execute only).
Configure AlmaLinux OS 9 to define default permissions for all authenticated users in such a way that the user can only read and modify their own files.
Change any found "umask" parameters in the "/etc/bashrc*", "/etc/csh*", and "/etc/profile*" files to "077":
umask 077
Verify that the "umask" setting for installed shells is "077".
Note: If the value of the "umask" parameter is set to "000", the severity is raised to a CAT I.
$ grep -ir umask /etc/profile* /etc/bashrc* /etc/csh*
/etc/csh.cshrc: umask 077
If the "umask" parameter is set to anything other than "077", this is a finding.
STIG ID: ALMA-09-017950 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269238
Accounts providing no operational purpose provide additional opportunities for system compromise. Unnecessary accounts include user accounts for individuals not requiring access to the system and application accounts for applications not installed on the system.
Remove unauthorized local interactive user accounts with the following command where
$ userdel -rf
Verify that there are no unauthorized interactive user accounts with the following command:
$ cat /etc/passwd
root:x:0:0:root:/root:/bin/bash
...
sync:x:5:0:sync:/sbin:/bin/sync
shutdown:x:6:0:shutdown:/sbin:/sbin/shutdown
halt:x:7:0:halt:/sbin:/sbin/halt
simon:x:1000:1000::/home/simon:/bin/bash
Interactive user accounts, generally will have a user identifier (UID) of 1000 or greater, a home directory in a specific partition, and an interactive shell.
Obtain the list of interactive user accounts authorized to be on the system from the system administrator or information system security officer (ISSO) and compare it to the list of local interactive user accounts on the system.
If there are unauthorized local user accounts on the system, this is a finding.
STIG ID: ALMA-09-018060 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269239
ACLs can provide permissions beyond those permitted through the file mode and must be verified by the file integrity tools.
Configure the file integrity tool to check file and directory ACLs.
If AIDE is installed, ensure the "acl" rule is present on all uncommented file and directory selection lists.
Verify that that AIDE is verifying ACLs with the following command:
$ grep acl /etc/aide.conf
All= p+i+n+u+g+s+m+S+sha512+acl+xattrs+selinux
If the "acl" rule is not being used on all uncommented selection lines in the "/etc/aide.conf" file, or ACLs are not being checked by another file integrity tool, this is a finding.
STIG ID: ALMA-09-018170 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269240
File integrity tools use cryptographic hashes for verifying file contents and directories have not been altered. These hashes must be FIPS 140-3 approved cryptographic hashes.
Configure the file integrity tool to use FIPS 140-3 cryptographic hashes for validating file and directory contents.
If AIDE is installed, ensure the "sha512" rule is present on all uncommented file and directory selection lists. Exclude any log files, or files expected to change frequently, to reduce unnecessary notifications.
Verify that AIDE is configured to use FIPS 140-3 file hashing with the following command:
$ grep sha512 /etc/aide.conf
All=p+i+n+u+g+s+m+S+sha512+acl+xattrs+selinux
If the "sha512" rule is not being used on all uncommented selection lines in the "/etc/aide.conf" file, or another file integrity tool is not using FIPS 140-3-approved cryptographic hashes for validating file contents and directories, this is a finding.
STIG ID: ALMA-09-018280 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269241
Extended attributes in file systems are used to contain arbitrary data and file metadata with security implications.
Configure the file integrity tool to check file and directory extended attributes.
If AIDE is installed, ensure the "xattrs" rule is present on all uncommented file and directory selection lists.
Verify that AIDE is configured to verify extended attributes with the following command:
$ grep xattrs /etc/aide.conf
All= p+i+n+u+g+s+m+S+sha512+acl+xattrs+selinux
If the "xattrs" rule is not being used on all uncommented selection lines in the "/etc/aide.conf" file, or extended attributes are not being checked by another file integrity tool, this is a finding.
If the "acl" rule is not being used on all uncommented selection lines in the "/etc/aide.conf" file, or ACLs are not being checked by another file integrity tool, this is a finding.
STIG ID: ALMA-09-018390 | SRG: SRG-OS-000480-GPOS-00225 | Severity: medium | CCI: | Vulnerability Id: V-269242
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.
Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possible combinations that need to be tested before the password is compromised.
Configure AlmaLinux OS 9 to prevent the use of dictionary words for passwords.
Add or update the following line in the "/etc/security/pwquality.conf" file or a configuration file in the "/etc/security/pwquality.conf.d/" directory:
dictcheck = 1
Remove any configurations that conflict with the above value.
Verify AlmaLinux OS 9 prevents the use of dictionary words for passwords with the following command:
$ grep -r dictcheck /etc/security/pwquality.conf*
/etc/security/pwquality.conf.d/stig.conf:dictcheck = 1
If the value of "dictcheck" is not "1" , is not set, is commented out, or if conflicting results are returned, this is a finding.
STIG ID: ALMA-09-018500 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269243
An illicit router advertisement message could result in a man-in-the-middle attack.
Configure AlmaLinux OS 9 to not accept router advertisements on all IPv6 interfaces unless the system is a router.
Create a numbered *.conf file in /etc/sysctl.d/ with the following content:
net.ipv6.conf.all.accept_ra = 0
net.ipv6.conf.default.accept_ra = 0
net.ipv6.conf.lo.accept_ra = 0
The system configuration files need to be reloaded for the changes to take effect. To reload the contents of the files, run the following command:
$ sysctl –system
Note: If IPv6 is disabled on the system, this requirement is Not Applicable.
Verify AlmaLinux OS 9 does not accept router advertisements on any IPv6 interfaces, unless the system is a router.
Determine if router advertisements are not accepted by using the following command:
$ sysctl -a | grep 'accept_ra '
net.ipv6.conf.all.accept_ra = 1
net.ipv6.conf.default.accept_ra = 1
net.ipv6.conf.enp1s0.accept_ra = 0
net.ipv6.conf.lo.accept_ra = 1
If any of the returned lines are not set to "0" and it is not documented with the information system security officer (ISSO) as an operational requirement, this is a finding.
STIG ID: ALMA-09-018610 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269244
ICMP redirect messages are used by routers to inform hosts that a more direct route exists for a particular destination. These messages modify the host's route table and are unauthenticated. An illicit ICMP redirect message could result in a man-in-the-middle attack.
This feature of the IP protocol has few legitimate uses. It should be disabled unless absolutely required.
Configure AlmaLinux OS 9 to ignore ICMP redirect messages.
Create a numbered *.conf file in /etc/sysctl.d/ with the following content:
net.ipv4.conf.all.accept_redirects = 0
net.ipv4.conf.default.accept_redirects = 0
net.ipv4.conf.lo.accept_redirects = 0
net.ipv6.conf.all.accept_redirects = 0
net.ipv6.conf.default.accept_redirects = 0
net.ipv6.conf.lo.accept_redirects = 0
The system configuration files need to be reloaded for the changes to take effect. To reload the contents of the files, run the following command:
$ sysctl –system
Verify AlmaLinux OS 9 will not accept ICMP redirect messages.
Check the value of the "accept_redirects" variables with the following command:
$ sysctl -a | grep accept_redirects
net.ipv4.conf.all.accept_redirects = 0
net.ipv4.conf.default.accept_redirects = 0
net.ipv4.conf.enp1s0.accept_redirects = 0
net.ipv4.conf.lo.accept_redirects = 0
net.ipv6.conf.all.accept_redirects = 0
net.ipv6.conf.default.accept_redirects = 0
net.ipv6.conf.enp1s0.accept_redirects = 0
net.ipv6.conf.lo.accept_redirects = 0
If the returned lines do not all have a value of "0", this is a finding.
STIG ID: ALMA-09-018720 | SRG: SRG-OS-000480-GPOS-00232 | Severity: medium | CCI: | Vulnerability Id: V-269245
"Firewalld" provides an easy and effective way to block/limit remote access to the system via ports, services, and protocols.
Remote access services, such as those providing remote access to network devices and information systems, which lack automated control capabilities, increase risk and make remote user access management difficult at best.
Remote access is access to DOD nonpublic information systems by an authorized user (or an information system) communicating through an external, nonorganization-controlled network. Remote access methods include, for example, dial-up, broadband, and wireless.
AlmaLinux OS 9 functionality (e.g., SSH) must be capable of taking enforcement action if the audit reveals unauthorized activity. Automated control of remote access sessions allows organizations to ensure ongoing compliance with remote access policies by enforcing connection rules of remote access applications on a variety of information system components (e.g., servers, workstations, notebook computers, smartphones, and tablets).
Satisfies: SRG-OS-000480-GPOS-00232, SRG-OS-000096-GPOS-00050, SRG-OS-000297-GPOS-00115
Enable the firewalld service using the following command:
$ systemctl enable --now firewalld
Verify that "firewalld" is active with the following command:
$ systemctl is-active firewalld
active
If the firewalld service is not active, this is a finding.
STIG ID: ALMA-09-018830 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269246
Failure to restrict network connectivity only to authorized systems permits inbound connections from malicious systems. It also permits outbound connections that may facilitate exfiltration of DOD data.
AlmaLinux OS 9 incorporates the "firewalld" daemon, which allows for many different configurations. One of these configurations is zones. Zones can be used to a deny-all, allow-by-exception approach. The default "drop" zone will drop all incoming network packets unless it is explicitly allowed by the configuration file or is related to an outgoing network connection.
Configure the "firewalld" daemon to employ a deny-all, allow-by-exception.
Start by adding the exceptions that are required for mission functionality to the "drop" zone. If SSH access on port 22 is needed for example, run the following command:
$ firewall-cmd --permanent --add-service=ssh --zone=drop
Set the default zone to the "drop" zone:
$ firewall-cmd --set-default-zone=drop
Note: This is a runtime and a permanent change.
Add any interfaces to the newly modified "drop" zone:
$ firewall-cmd --permanent --zone=drop --change-interface=enp1s0
Reload the firewall rules for changes to take effect:
$ firewall-cmd --reload
Check zones and interfaces:
$ firewall-cmd --get-active-zones
drop
interfaces: enp1s0
Check new default zone's target is set to "DROP":
$ firewall-cmd --permanent --info-zone=drop | grep target
target: DROP
The same outcome is achieved by creating a new zone, for example:
$ firewall-cmd --permanent --new-zone=stig
$ firewall-cmd --reload
$ firewall-cmd --permanent --change-interface=enp1s0 --zone=stig
$ firewall-cmd --permanent --add-service=ssh --zone=stig
$ firewall-cmd --permanent --set-target=DROP --zone=stig
$ firewall-cmd --set-default-zone=stig
Verify the AlmaLinux OS 9 "firewalld" is configured to employ a deny-all, allow-by-exception policy for allowing connections to other systems.
First ensure firewalld is running:
$ firewall-cmd --state
running
Next, get the active zones:
$ firewall-cmd --get-active-zones
public
interfaces: enp1s0
Check the target of the zones returned from the previous command:
$ firewall-cmd --info-zone=public | grep target
target: DROP
Check the runtime and permanent rules match:
$ firewall-cmd --permanent --info-zone=public | grep target
target: DROP
If no zones are active on the AlmaLinux OS 9 interfaces or if runtime and permanent targets are set to a different option other than "DROP", this is a finding.
STIG ID: ALMA-09-018940 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269247
Some routers will send responses to broadcast frames that violate RFC-1122, which fills up a log file system with many useless error messages. An attacker may take advantage of this and attempt to flood the logs with bogus error logs. Ignoring bogus ICMP error responses reduces log size, although some activity would not be logged.
Configure AlmaLinux OS 9 to use reverse path filtering on all IP interfaces.
Create a numbered *.conf file in /etc/sysctl.d/ with the following content:
net.ipv4.icmp_ignore_bogus_error_responses = 1
The system configuration files need to be reloaded for the changes to take effect. To reload the contents of the files, run the following command:
$ sysctl --system
Verify AlmaLinux OS 9 ignores bogus ICMP error responses with the following command:
$ sysctl net.ipv4.icmp_ignore_bogus_error_responses
net.ipv4.icmp_ignore_bogus_error_responses = 1
If the returned line does not have a value of "1", this is a finding.
STIG ID: ALMA-09-019050 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269248
Responding to broadcast (ICMP) echoes facilitates network mapping and provides a vector for amplification attacks.
Ignoring ICMP echo requests (pings) sent to broadcast or multicast addresses makes the system slightly more difficult to enumerate on the network.
Configure AlmaLinux OS 9 to use reverse path filtering on all IP interfaces.
Create a numbered *.conf file in /etc/sysctl.d/ with the following content:
net.ipv4.icmp_echo_ignore_broadcasts = 1
The system configuration files need to be reloaded for the changes to take effect. To reload the contents of the files, run the following command:
$ sysctl –system
Verify AlmaLinux OS 9 does not respond to ICMP echoes sent to a broadcast address with the following command:
$ sysctl net.ipv4.icmp_echo_ignore_broadcasts
net.ipv4.icmp_echo_ignore_broadcasts = 1
If the returned line does not have a value of "1", this is a finding.
STIG ID: ALMA-09-019160 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269249
Routing protocol daemons are typically used on routers to exchange network topology information with other routers. If this capability is used when not required, system network information may be unnecessarily transmitted across the network.
Configure AlmaLinux OS 9 to not allow IP packet forwarding, unless the system is a router.
Create a numbered *.conf file in /etc/sysctl.d/ with the following content:
net.ipv4.conf.all.forwarding = 0
net.ipv4.conf.default.forwarding = 0
net.ipv4.conf.lo.forwarding = 0
net.ipv6.conf.all.forwarding = 0
net.ipv6.conf.default.forwarding = 0
net.ipv6.conf.lo.forwarding = 0
The system configuration files need to be reloaded for the changes to take effect. To reload the contents of the files, run the following command:
$ sysctl –system
Verify AlmaLinux OS 9 is not performing IP packet forwarding, unless the system is a router.
Check that IP forwarding is disabled using the following command:
$ sysctl -a | grep -E '\.forwarding'
net.ipv4.conf.all.forwarding = 0
net.ipv4.conf.default.forwarding = 0
net.ipv4.conf.enp1s0.forwarding = 0
net.ipv4.conf.lo.forwarding = 0
net.ipv6.conf.all.forwarding = 0
net.ipv6.conf.default.forwarding = 0
net.ipv6.conf.enp1s0.forwarding = 0
net.ipv6.conf.lo.forwarding = 0
If any of the returned lines are not set to "0" and it is not documented with the information system security officer (ISSO) as an operational requirement, this is a finding.
STIG ID: ALMA-09-019270 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269250
IP tunneling mechanisms can be used to bypass network filtering. If tunneling is required, it must be documented with the information system security officer (ISSO).
Remove all unapproved tunnels from the system, or document them with the ISSO.
Verify that AlmaLinux OS 9 does not have unauthorized IP tunnels configured.
Determine if the "IPsec" service is active with the following command:
$ systemctl status ipsec
ipsec.service - Internet Key Exchange (IKE) Protocol Daemon for IPsec
Loaded: loaded (/usr/lib/systemd/system/ipsec.service; disabled; preset: disabled)
Active: inactive (dead)
If the "IPsec" service is active, check for configured IPsec connections ("conn"), with the following command:
$ grep -ri conn /etc/ipsec.conf /etc/ipsec.d/ | grep -v '#'
Verify any returned results are documented with the ISSO.
If the IPsec tunnels are active and not approved, this is a finding.
STIG ID: ALMA-09-019380 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269251
The presence of "martian" packets (which have impossible addresses) as well as spoofed packets, source-routed packets, and redirects could be a sign of nefarious network activity. Logging these packets enables this activity to be detected.
Configure AlmaLinux OS 9 to log martian packets.
Create a numbered *.conf file in /etc/sysctl.d/ with the following content:
net.ipv4.conf.all.log_martians = 1
net.ipv4.conf.default.log_martians = 1
net.ipv4.conf.lo.log_martians = 1
The system configuration files need to be reloaded for the changes to take effect. To reload the contents of the files, run the following command:
$ sysctl --system
Verify AlmaLinux OS 9 logs martian packets.
Check the value of the "log_martians" variables with the following command:
$ sysctl -a | grep log_martians
net.ipv4.conf.all.log_martians = 1
net.ipv4.conf.default.log_martians = 1
net.ipv4.conf.enp1s0.log_martians = 1
net.ipv4.conf.lo.log_martians = 1
If the returned lines do not all have a value of "1", this is a finding.
STIG ID: ALMA-09-019490 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269252
If unrestricted mail relaying is permitted, unauthorized senders could use this host as a mail relay for the purpose of sending spam or other unauthorized activity.
Modify the postfix configuration file to restrict client connections to the local network with the following command:
$ postconf -e 'smtpd_client_restrictions = permit_mynetworks,reject'
Note: If postfix is not installed, this is Not Applicable.
Verify AlmaLinux OS 9 is configured to prevent unrestricted mail relaying with the following command:
$ postconf -n smtpd_client_restrictions
smtpd_client_restrictions = permit_mynetworks,reject
If the "smtpd_client_restrictions" parameter contains any entries other than "permit_mynetworks" and "reject", and the additional entries have not been documented with the information system security officer (ISSO), this is a finding.
STIG ID: ALMA-09-019600 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269253
Network Security Services (NSS) is a set of libraries designed to support cross-platform development of security-enabled client and server applications. Install the "nss-tools" package to install command-line tools to manipulate the NSS certificate and key database.
The nss-tools package can be installed with the following command:
$ dnf install nss-tools
Verify that AlmaLinux OS 9 has the nss-tools package installed with the following command:
$ dnf list --installed nss-tools
Installed Packages
nss-tools.x86_64 3.90.0-6.el9_2.tuxcare.1 @@commandline
If the "nss-tools" package is not installed, this is a finding.
STIG ID: ALMA-09-019710 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269254
Network interfaces in promiscuous mode allow for the capture of all network traffic visible to the system. If unauthorized individuals can access these applications, it may allow them to collect information such as logon IDs, passwords, and key exchanges between systems.
If the system is being used to perform a network troubleshooting function, the use of these tools must be documented with the information system security officer (ISSO) and restricted to only authorized personnel.
Configure network interfaces to turn off promiscuous mode unless approved by the ISSO and documented.
Set the promiscuous mode of an interface to off with the following command:
$ ip link set dev
Verify network interfaces are not in promiscuous mode with the following command:
$ ip link | grep -i promisc
If network interfaces are found on the system in promiscuous mode and their use has not been approved by the ISSO and documented, this is a finding.
STIG ID: ALMA-09-019820 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269255
Enabling reverse path filtering drops packets with source addresses that should not have been able to be received on the interface on which they were received. It must not be used on systems that are routers for complicated networks, but is helpful for end hosts and routers serving small networks.
Configure AlmaLinux OS 9 to use reverse path filtering on all IP interfaces.
Create a numbered *.conf file in /etc/sysctl.d/ with the following content:
net.ipv4.conf.all.rp_filter = 1
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.lo.rp_filter = 1
The system configuration files need to be reloaded for the changes to take effect. To reload the contents of the files, run the following command:
$ sysctl --system
Verify AlmaLinux OS 9 uses reverse path filtering on all IP interfaces with the following command:
$ sysctl -a | grep -E '\.rp_filter'
net.ipv4.conf.all.rp_filter = 0
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.enp1s0.rp_filter = 1
net.ipv4.conf.lo.rp_filter = 1
If the returned lines do not all have a value of "1", this is a finding.
STIG ID: ALMA-09-019930 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269256
ICMP redirect messages are used by routers to inform hosts that a more direct route exists for a particular destination. These messages contain information from the system's route table possibly revealing portions of the network topology.
The ability to send ICMP redirects is only appropriate for systems acting as routers.
Configure AlmaLinux OS 9 to not allow interfaces to perform ICMP redirects.
Create a numbered *.conf file in /etc/sysctl.d/ with the following content:
net.ipv4.conf.all.send_redirects = 0
net.ipv4.conf.default.send_redirects = 0
net.ipv4.conf.lo.send_redirects = 0
EOF
The system configuration files need to be reloaded for the changes to take effect. To reload the contents of the files, run the following command:
$ sysctl –system
Verify AlmaLinux OS 9 does not send ICMP redirects.
Check the value of the "send_redirects" variables with the following command:
$ sysctl -a | grep send_redirects
net.ipv4.conf.all.send_redirects = 0
net.ipv4.conf.default.send_redirects = 0
net.ipv4.conf.enp1s0.send_redirects = 0
net.ipv4.conf.lo.send_redirects = 0
If the returned lines do not all have a value of "0", this is a finding.
STIG ID: ALMA-09-020040 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269257
The .shosts files are used to configure host-based authentication for individual users or the system via SSH. Host-based authentication is not sufficient for preventing unauthorized access to the system, as it does not require interactive identification and authentication of a connection request, or for the use of two-factor authentication.
Remove any found ".shosts" files from the system.
$ rm /[path]/[to]/[file]/.shosts
Verify there are no ".shosts" files on AlmaLinux OS 9 with the following command:
$ find / -name .shosts
If a ".shosts" file is found, this is a finding.
STIG ID: ALMA-09-020150 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269258
The shosts.equiv files are used to configure host-based authentication for the system via SSH. Host-based authentication is not sufficient for preventing unauthorized access to the system, as it does not require interactive identification and authentication of a connection request, or for the use of two-factor authentication.
Remove any found "shosts.equiv" files from the system.
$ rm /[path]/[to]/[file]/shosts.equiv
Verify there are no "shosts.equiv" files on AlmaLinux OS 9 with the following command:
$ find / -name shosts.equiv
If a "shosts.equiv" file is found, this is a finding.
STIG ID: ALMA-09-020260 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269259
Source-routed packets allow the source of the packet to suggest routers forward the packet along a different path than configured on the router, which can be used to bypass network security measures. This requirement applies only to the forwarding of source-routed traffic, such as when IP forwarding is enabled and the system is functioning as a router.
Accepting source-routed packets has few legitimate uses. It must be disabled unless it is absolutely required.
Configure AlmaLinux OS 9 to ignore source-routed packets.
Create a numbered *.conf file in /etc/sysctl.d/ with the following content:
net.ipv4.conf.all.accept_source_route = 0
net.ipv4.conf.default.accept_source_route = 0
net.ipv4.conf.lo.accept_source_route = 0
net.ipv6.conf.all.accept_source_route = 0
net.ipv6.conf.default.accept_source_route = 0
net.ipv6.conf.lo.accept_source_route = 0
The system configuration files must be reloaded for the changes to take effect. To reload the contents of the files, run the following command:
$ sysctl –system
Verify AlmaLinux OS 9 will not accept source-routed packets.
Check the value of the "accept_source_route" variables with the following command:
$ sysctl -a | grep accept_source_route
net.ipv4.conf.all.accept_source_route = 0
net.ipv4.conf.default.accept_source_route = 0
net.ipv4.conf.enp1s0.accept_source_route = 0
net.ipv4.conf.lo.accept_source_route = 0
net.ipv6.conf.all.accept_source_route = 0
net.ipv6.conf.default.accept_source_route = 0
net.ipv6.conf.enp1s0.accept_source_route = 0
net.ipv6.conf.lo.accept_source_route = 0
If the returned lines do not all have a value of "0", this is a finding.
STIG ID: ALMA-09-020370 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269260
If compression is allowed in an SSH connection prior to authentication, vulnerabilities in the compression software could result in compromise of the system from an unauthenticated connection, potentially with root privileges.
Configure the SSH daemon to not allow compression.
Add the following line to "/etc/ssh/sshd_config", or uncomment the line and set the value to "delayed" or preferably "no":
Compression no
Alternatively, add the setting to an include file if the line "Include /etc/ssh/sshd_config.d/*.conf" is found at the top of the "/etc/ssh/sshd_config" file:
$ echo 'Compression no' > /etc/ssh/sshd_config.d/40-compression.conf
Restart the SSH daemon for the settings to take effect:
$ systemctl restart sshd.service
Verify the SSH daemon performs compression after a user successfully authenticates with the following command:
$ sshd -T | grep compression
Compression no
If the "Compression" keyword is set to "yes", this is a finding.
STIG ID: ALMA-09-020480 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269261
Service configuration files enable or disable features of their respective services, which if configured incorrectly, can lead to insecure and vulnerable configurations. Therefore, service configuration files must be owned by the correct group to prevent unauthorized changes.
Configure the SSHD config files to be group-owned by root with the following command:
$ chgrp root /etc/ssh/sshd_config /etc/ssh/sshd_config.d/*.conf
Verify the group ownership of "/etc/ssh/sshd_config" and any "/etc/ssh/sshd_config.d/*.conf" files with the following command:
$ find /etc/ssh/sshd_config /etc/ssh/sshd_config.d -exec stat -c "%G %n" {} \;
root /etc/ssh/sshd_config
root /etc/ssh/sshd_config.d
root /etc/ssh/sshd_config.d/40-stig.conf
root /etc/ssh/sshd_config.d/50-redhat.conf
root /etc/ssh/sshd_config.d/clientalive.conf
If any of the files do not have a group owner of "root", this is a finding.
STIG ID: ALMA-09-020590 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269262
Service configuration files enable or disable features of their respective services, which, if configured incorrectly, can lead to insecure and vulnerable configurations. Therefore, service configuration files must be owned by the correct group to prevent unauthorized changes.
Configure the SSHD config files to be owned by root with the following command:
$ chown root /etc/ssh/sshd_config /etc/ssh/sshd_config.d/*.conf
Verify the ownership of "/etc/ssh/sshd_config" and any "/etc/ssh/sshd_config.d/*.conf" files with the following command:
$ find /etc/ssh/sshd_config /etc/ssh/sshd_config.d -exec stat -c "%U %n" {} \;
root /etc/ssh/sshd_config
root /etc/ssh/sshd_config.d
root /etc/ssh/sshd_config.d/40-stig.conf
root /etc/ssh/sshd_config.d/50-redhat.conf
root /etc/ssh/sshd_config.d/clientalive.conf
If any of the files do not have an owner of "root", this is a finding.
STIG ID: ALMA-09-020700 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269263
Service configuration files enable or disable features of their respective services, which if configured incorrectly, can lead to insecure and vulnerable configurations. Therefore, service configuration files must be owned by the correct group to prevent unauthorized changes.
Configure the SSHD config files to have "0600" permissions with the following command:
$ chmod 0600 /etc/ssh/sshd_config /etc/ssh/sshd_config.d/*.conf
Verify the permissions of "/etc/ssh/sshd_config" and any "/etc/ssh/sshd_config.d/*.conf" files with the following command:
$ find /etc/ssh/sshd_config /etc/ssh/sshd_config.d -exec stat -c "%#a %n" {} \;
600 /etc/ssh/sshd_config
755 /etc/ssh/sshd_config.d
600 /etc/ssh/sshd_config.d/40-stig.conf
600 /etc/ssh/sshd_config.d/50-redhat.conf
600 /etc/ssh/sshd_config.d/clientalive.conf
If any of the files do not have "0600" permissions, this is a finding.
STIG ID: ALMA-09-020810 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269264
SSH trust relationships mean a compromise on one host can allow an attacker to move trivially to other hosts.
Configure the AlmaLinux OS 9 SSH daemon to not allow a noncertificate trusted host SSH logon to the system with the following command:
Add the following line to "/etc/ssh/sshd_config", or uncomment the line and set the value to "no":
HostbasedAuthentication no
Alternatively, add the setting to an include file if the line "Include /etc/ssh/sshd_config.d/*.conf" is found at the top of the "/etc/ssh/sshd_config" file:
$ echo 'HostbasedAuthentication no' > /etc/ssh/sshd_config.d/40-hostbasedauthentication.conf
Restart the SSH daemon for the settings to take effect:
$ systemctl restart sshd.service
Verify the operating system does not allow a noncertificate trusted host SSH logon to the system with the following command:
$ sshd -T | grep hostbasedauthentication
hostbasedauthentication no
If the "HostbasedAuthentication" keyword is not set to "no", this is a finding.
STIG ID: ALMA-09-020920 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269265
If an unauthorized user obtains the private SSH host key file, the host could be impersonated.
Configure the mode of SSH private host key files under "/etc/ssh" to "0640" with the following command:
$ chmod 0640 /etc/ssh/ssh_host*key
Restart the SSH daemon for the changes to take effect:
$ systemctl restart sshd.service
Verify the SSH private host key files have a mode of "0640" or less permissive with the following command:
$ stat -c "%#a %n" /etc/ssh/ssh_host*key
0640 /etc/ssh/ssh_host_ecdsa_key
0640 /etc/ssh/ssh_host_rsa_key
If any private host key file has a mode more permissive than "0640", this is a finding.
STIG ID: ALMA-09-021030 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269266
If a public host key file is modified by an unauthorized user, the SSH service may be compromised.
Whilst public keys are publicly readable, they should not be writeable by nonowners.
Change the mode of public host key files under "/etc/ssh" to "0644" with the following command:
$ chmod 0644 /etc/ssh/*key.pub
Restart the SSH daemon for the changes to take effect:
$ systemctl restart sshd.service
Verify the SSH public host key files have a mode of "0644" or less permissive with the following command:
Note: SSH public key files may be found in other directories on the system depending on the installation.
$ stat -c "%#a %n" /etc/ssh/ssh_host*key.pub
0644 /etc/ssh/ssh_host_ecdsa_key.pub
0644 /etc/ssh/ssh_host_rsa_key.pub
If any public key has a mode more permissive than "0644", this is a finding.
STIG ID: ALMA-09-021140 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269267
Configuring the IgnoreUserKnownHosts setting for the SSH daemon provides additional assurance that remote login via SSH will require a password, even in the event of misconfiguration elsewhere.
Configure the SSH daemon to not allow known hosts authentication.
Add the following line to "/etc/ssh/sshd_config", or uncomment the line and set the value to "yes":
IgnoreUserKnownHosts yes
Alternatively, add the setting to an include file if the line "Include /etc/ssh/sshd_config.d/*.conf" is found at the top of the "/etc/ssh/sshd_config" file:
$ echo 'IgnoreUserKnownHosts yes' > /etc/ssh/sshd_config.d/40-knownhosts.conf
Restart the SSH daemon for the settings to take effect:
$ systemctl restart sshd.service
Verify the SSH daemon does not allow known hosts authentication with the following command:
$ sshd -T | grep ignoreuserknownhosts
ignoreuserknownhosts yes
If the value is returned as "no", this is a finding.
STIG ID: ALMA-09-021250 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269268
Providing users feedback on when account accesses last occurred facilitates user recognition and reporting of unauthorized account use.
Configure the SSH daemon to provide users with feedback on when account accesses last occurred.
Add the following line to "/etc/ssh/sshd_config", or uncomment the line and set the value to "yes":
PrintLastLog yes
Alternatively, add the setting to an include file if the line "Include /etc/ssh/sshd_config.d/*.conf" is found at the top of the "/etc/ssh/sshd_config" file:
$ echo 'PrintLastLog yes' > /etc/ssh/sshd_config.d/40-lastlog.conf
Restart the SSH daemon for the settings to take effect:
$ systemctl restart sshd.service
Verify the SSH daemon provides users with feedback on when account accesses last occurred with the following command:
$ sshd -T | grep printlastlog
printlastlog yes
If the value is returned as "no", this is a finding.
STIG ID: ALMA-09-021360 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269269
SSH trust relationships mean a compromise on one host can allow an attacker to move trivially to other hosts.
Configure the SSH daemon to not allow rhosts authentication.
Add the following line to "/etc/ssh/sshd_config", or uncomment the line and set the value to "yes":
IgnoreRhosts yes
Alternatively, add the setting to an include file if the line "Include /etc/ssh/sshd_config.d/*.conf" is found at the top of the "/etc/ssh/sshd_config" file:
$ echo 'IgnoreRhosts yes' > /etc/ssh/sshd_config.d/40-rhosts.conf
Restart the SSH daemon for the settings to take effect:
$ systemctl restart sshd.service
Verify the SSH daemon does not allow rhosts authentication with the following command:
$ sshd -T | grep ignorerhosts
ignorerhosts yes
If the "IgnoreRhosts" keyword is set to "no", this is a finding.
STIG ID: ALMA-09-021470 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269270
When X11 forwarding is enabled, there may be additional exposure to the server and client displays if the sshd proxy display is configured to listen on the wildcard address. By default, sshd binds the forwarding server to the loopback address and sets the hostname part of the DISPLAY environment variable to localhost. This prevents remote hosts from connecting to the proxy display.
Configure the SSH daemon to not allow X11 forwarding.
Add the following line to "/etc/ssh/sshd_config", or uncomment the line and set the value to "no":
X11forwarding no
Alternatively, add the setting to an include file if the line "Include /etc/ssh/sshd_config.d/*.conf" is found at the top of the "/etc/ssh/sshd_config" file:
$ echo 'X11forwarding no' > /etc/ssh/sshd_config.d/40-x11forwarding.conf
Restart the SSH daemon for the settings to take effect:
$ systemctl restart sshd.service
Verify the SSH daemon does not allow X11Forwarding with the following command:
$ sshd -T | grep x11forwarding
x11forwarding no
If the value is returned as "yes" and X11 forwarding is not documented with the information system security officer (ISSO) as an operational requirement, this is a finding.
STIG ID: ALMA-09-021580 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269271
When X11 forwarding is enabled, there may be additional exposure to the server and client displays if the sshd proxy display is configured to listen on the wildcard address. By default, sshd binds the forwarding server to the loopback address and sets the hostname part of the "DISPLAY" environment variable to localhost. This prevents remote hosts from connecting to the proxy display.
Configure the SSH daemon to prevent remote hosts from connecting to the proxy display.
Add the following line to "/etc/ssh/sshd_config", or uncomment the line and set the value to "yes":
X11UseLocalhost yes
Alternatively, add the setting to an include file if the line "Include /etc/ssh/sshd_config.d/*.conf" is found at the top of the "/etc/ssh/sshd_config" file:
$ echo 'X11UseLocalhost yes' > /etc/ssh/sshd_config.d/40-x11local.conf
Restart the SSH daemon for the settings to take effect:
$ systemctl restart sshd.service
Verify the SSH daemon prevents remote hosts from connecting to the proxy display with the following command:
$ sshd -T | grep x11uselocalhost
x11uselocalhost yes
If the value is returned as "no", this is a finding.
STIG ID: ALMA-09-021690 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269272
Restricting TFTP to a specific directory prevents remote users from copying, transferring, or overwriting system files. Using the "-s" option causes the TFTP service to only serve files from the given directory.
Configure the TFTP daemon to operate in secure mode with the following command:
$ systemctl edit tftp.service
Insert the following between the two sets of comments, making sure to add the "-s" option with a nonroot ("/") directory.
[Service]
ExecStart=
ExecStart=/usr/sbin/in.tftpd -s /tftp
Note: If a TFTP server is not installed, this requirement is Not Applicable.
Verify the TFTP daemon is configured to operate in secure mode.
Check if a TFTP server is installed with the following command:
$ dnf list --installed tftp-server
Installed Packages
tftp-server.x86_64 5.2-37.el9 @appstream
If a TFTP server is installed, check for the server arguments with the following command:
$ systemctl cat tftp | grep ExecStart=
ExecStart=/usr/sbin/in.tftpd -s /var/lib/tftpboot
If the "ExecStart" line does not have a "-s" option, and a subdirectory is not assigned, this is a finding.
STIG ID: ALMA-09-021800 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269273
When hardened, the extended BPF JIT compiler will randomize any kernel addresses in the BPF programs and maps, and will not expose the JIT addresses in "/proc/kallsyms".
Configure AlmaLinux OS 9 to enable hardening for the BPF JIT compiler.
Create a numbered *.conf file in /etc/sysctl.d/ with the following content:
net.core.bpf_jit_harden = 2
The system configuration files must be reloaded for the changes to take effect. To reload the contents of the files, run the following command:
$ sysctl –system
Verify AlmaLinux OS 9 enables hardening for the BPF JIT with the following commands:
$ sysctl net.core.bpf_jit_harden
net.core.bpf_jit_harden = 2
If the returned line does not have a value of "2", or a line is not returned, this is a finding.
Check that the configuration files are present to enable this kernel parameter.
$ /usr/lib/systemd/systemd-sysctl --cat-config | egrep -v '^(#|;)' | grep -F net.core.bpf_jit_harden | tail -1
net.core.bpf_jit_harden = 2
If the network parameter "net.core.bpf_jit_harden" is not equal to "2" or nothing is returned, this is a finding.
STIG ID: ALMA-09-021910 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269274
Unlike text-based keyfiles, the binary database is impossible to check through most automated and all manual means; therefore, to evaluate dconf configuration, both have to be true at the same time—configuration files have to be compliant, and the database needs to be more recent than those keyfiles, which gives confidence that it reflects them.
Update the dconf databases by running the following command:
$ dconf update
Note: This requirement assumes the use of the AlmaLinux OS 9 default graphical user interface, the GNOME desktop environment. If the system does not have any graphical user interface installed, this requirement is Not Applicable.
Check the last modification time of the local databases, comparing it to the last modification time of the related keyfiles. The following command will check every dconf database and compare its modification time to the related system keyfiles:
$ function dconf_needs_update { for db in $(find /etc/dconf/db -maxdepth 1 -type f); do db_mtime=$(stat -c %Y "$db"); keyfile_mtime=$(stat -c %Y "$db".d/* | sort -n | tail -1); if [ -n "$db_mtime" ] && [ -n "$keyfile_mtime" ] && [ "$db_mtime" -lt "$keyfile_mtime" ]; then echo "$db needs update"; return 1; fi; done; }; dconf_needs_update
If the command has any output, then a dconf database needs to be updated, and this is a finding.
STIG ID: ALMA-09-022020 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269275
If an unauthorized or modified device is allowed to exist on the system, there is the possibility the system may perform unintended or unauthorized operations.
Restore the SELinux policy for the affected device file from the system policy database using the following command:
$ restorecon -v
Substituting "
$ dnf reinstall
If a package was not used to install the SELinux policy for a given device class, then it must be generated manually and provide specific type labels.
Verify that all system device files are correctly labeled to prevent unauthorized modification.
List all device files on the system that are incorrectly labeled with the following commands:
Note: Device files are normally found under "/dev", but applications may place device files in other directories and may necessitate a search of the entire system.
# find /dev -context *:device_t:* \( -type c -o -type b \) -printf "%p %Z\n"
# find /dev -context *:unlabeled_t:* \( -type c -o -type b \) -printf "%p %Z\n"
Note: There are device files, such as "/dev/vmci", that are used when the operating system is a host virtual machine. They will not be owned by a user on the system and require the "device_t" label to operate. These device files are not a finding.
If there is output from either of these commands, other than already noted, this is a finding.
STIG ID: ALMA-09-022130 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269276
Local initialization files are used to configure the user's shell environment upon logon. Malicious modification of these files could compromise accounts upon logon.
World-readable "dot files" such as .bash_history or .netrc can reveal plaintext credentials, such files should be further protected (e.g., 0600).
Set the mode of the local initialization files to "0740" with the following command:
Note: The example will be for the "testuser" account, who has a home directory of "/home/testuser".
$ chmod 0740 /home/testuser/.
Verify that all local initialization files have a mode of "0740" or less permissive with the following command:
Note: The example will be for the "testuser" account, who has a home directory of "/home/testuser".
$ find /home/testuser/.[^.]* -maxdepth 0 -perm -740 -exec stat -c "%a %n" {} \; | more
755 /home/testuser/.cache
755 /home/testuser/.mozilla
If any local initialization files have a mode more permissive than "0740", this is a finding.
STIG ID: ALMA-09-022240 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269277
GnuTLS is a secure communications library implementing the SSL, TLS, and DTLS protocols and technologies around them. It provides a simple C language application programming interface (API) to access the secure communications protocols as well as APIs to parse and write X.509, PKCS #12, OpenPGP, and other required structures. This package contains command line TLS client and server and certificate manipulation tools.
The gnutls-utils package can be installed with the following command:
$ dnf install gnutls-utils
Verify that AlmaLinux OS 9 has the gnutls-utils package installed with the following command:
$ dnf list --installed gnutls-utils
Installed Packages
gnutls-utils.x86_64 3.7.6-23.el9_2.tuxcare.3 @@commandline
If the "gnutls-utils" package is not installed, this is a finding.
STIG ID: ALMA-09-022350 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269278
Kernel core dumps may contain the full contents of system memory at the time of the crash. Kernel core dumps consume a considerable amount of disk space and may result in denial of service by exhausting the available space on the target file system partition.
Unless the system is used for kernel development or testing, there is little need to run the kdump service.
Disable the kdump service with the following command:
$ systemctl mask --now kdump
Verify that the kdump service is disabled in system boot configuration with the following command:
$ systemctl is-enabled kdump
masked
Verify that the kdump service is not active (i.e., not running) through current runtime configuration with the following command:
$ systemctl is-active kdump
inactive
Verify that the kdump service is masked with the following command:
$ systemctl show kdump | grep "LoadState\|UnitFileState"
LoadState=masked
UnitFileState=masked
If the "kdump" service is loaded or active, and is not masked, this is a finding.
STIG ID: ALMA-09-022460 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269279
A user who is at the console can reboot the system at the login screen. If restart or shutdown buttons are pressed at the login screen, this can create the risk of short-term loss of availability of systems due to reboot.
Configure AlmaLinux OS 9 to disable a user's ability to restart the system.
Add or update the [org/gnome/settings-daemon/] section of the /etc/dconf/db/local.d/00-security-settings" database file and add or update the following lines:
[org/gnome/login-screen]
disable-restart-buttons=true
Then update the dconf system databases:
$ dconf update
Note: This requirement assumes the use of the AlmaLinux OS 9 default graphical user interface, Gnome Shell. If the system does not have any graphical user interface installed, this requirement is Not Applicable.
Verify AlmaLinux OS 9 disables a user's ability to restart the system with the following command:
$ grep -R disable-restart-buttons /etc/dconf/db/*
/etc/dconf/db/distro.d/20-authselect:disable-restart-buttons='true'
If the "disable-restart-button" setting is not set to "true", is missing or commented out from the dconf database files, this is a finding.
STIG ID: ALMA-09-022570 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269280
A user who is at the console can reboot the system at the login screen. If restart or shutdown buttons are pressed at the login screen, this can create the risk of short-term loss of availability of systems due to reboot.
Configure AlmaLinux OS 9 to prevent a user from overriding the disable-restart-buttons setting for graphical user interfaces.
Create a database to contain the systemwide graphical user logon settings (if it does not already exist) with the following command:
$ touch /etc/dconf/db/local.d/locks/session
Add the following line to prevent nonprivileged users from modifying it:
/org/gnome/login-screen/disable-restart-buttons
Run the following command to update the database:
$ dconf update
Note: This requirement assumes the use of the AlmaLinux OS 9 default graphical user interface, the GNOME desktop environment. If the system does not have any graphical user interface installed, this requirement is Not Applicable.
Verify AlmaLinux OS 9 prevents a user from overriding the disable-restart-buttons setting for graphical user interfaces.
Determine which profile the system database is using with the following command:
$ grep system-db /etc/dconf/profile/user
system-db:local
Check that graphical settings are locked from nonprivileged user modification with the following command:
Note: The example below is using the database "local" for the system, so the path is "/etc/dconf/db/local.d". This path must be modified if a database other than "local" is being used.
$ grep disable-restart-buttons /etc/dconf/db/local.d/locks/*
/org/gnome/login-screen/disable-restart-buttons
If the command does not return at least the example result, this is a finding.
STIG ID: ALMA-09-022680 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269281
The "nodev" mount option causes the system not to interpret character or block special devices. Executing character or blocking special devices from untrusted file systems increases the opportunity for nonprivileged users to attain unauthorized administrative access.
Configure the "/etc/fstab" to use the "nodev" option on file systems that are associated with removable media.
Verify file systems that are used for removable media are mounted with the "nodev" option with the following command:
$ cat /etc/fstab
UUID=0cb43738-b102-48f8-9174-061d8ee537b8 /mnt/usbdrive vfat noauto,owner,ro,nosuid,nodev,noexec 0 0
If a file system found in "/etc/fstab" refers to removable media and it does not have the "nodev" option set, this is a finding.
STIG ID: ALMA-09-022790 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269282
The "noexec" mount option causes the system to not execute binary files. This option must be used for mounting any file system not containing approved binary files, as they may be incompatible. Executing files from untrusted file systems increases the opportunity for nonprivileged users to attain unauthorized administrative access.
Configure the "/etc/fstab" to use the "noexec" option on file systems that are associated with removable media.
Verify file systems that are used for removable media are mounted with the "noexec" option with the following command:
$ cat /etc/fstab
UUID=0cb43738-b102-48f8-9174-061d8ee537b8 /mnt/usbdrive vfat noauto,owner,ro,nosuid,nodev,noexec 0 0
If a file system found in "/etc/fstab" refers to removable media and it does not have the "noexec" option set, this is a finding.
STIG ID: ALMA-09-022900 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269283
The "nosuid" mount option causes the system to not execute "setuid" and "setgid" files with owner privileges. This option must be used for mounting any file system not containing approved "setuid" and "setguid" files. Executing files from untrusted file systems increases the opportunity for nonprivileged users to attain unauthorized administrative access.
Configure the "/etc/fstab" to use the "nosuid" option on file systems that are associated with removable media.
Verify file systems that are used for removable media are mounted with the "nosuid" option with the following command:
$ cat /etc/fstab
UUID=0cb43738-b102-48f8-9174-061d8ee537b8 /mnt/usbdrive vfat noauto,owner,ro,nosuid,nodev,noexec 0 0
If a file system found in "/etc/fstab" refers to removable media and it does not have the "nosuid" option set, this is a finding.
STIG ID: ALMA-09-023010 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269284
User namespaces are used primarily for Linux containers. The value "0" disallows the use of user namespaces.
Configure AlmaLinux OS 9 to disable the use of user namespaces.
$ sysctl -w user.max_user_namespaces=0
The system configuration files need to be reloaded for the changes to take effect. To reload the contents of the files, run the following command:
$ sysctl --system
Verify AlmaLinux OS 9 disables the use of user namespaces with the following commands:
$ sysctl user.max_user_namespaces
user.max_user_namespaces = 0
If the returned line does not have a value of "0", or a line is not returned, this is a finding.
Check that the configuration files are present to enable this kernel parameter.
$ /usr/lib/systemd/systemd-sysctl --cat-config | egrep -v '^(#|;)' | grep -F user.max_user_namespaces | tail -1
user.max_user_namespaces = 0
If the network parameter "user.max_user_namespaces" is not equal to "0", or nothing is returned, this is a finding.
STIG ID: ALMA-09-023120 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269285
The "nodev" mount option causes the system to not interpret character or block special devices. Executing character or block special devices from untrusted file systems increases the opportunity for nonprivileged users to attain unauthorized administrative access.
Update each NFS mounted file system to use the "nodev" option on file systems that are being imported via NFS.
Note: If no NFS mounts are configured, this requirement is Not Applicable.
Verify AlmaLinux OS 9 has the "nodev" option configured for all NFS mounts with the following command:
$ grep nfs /etc/fstab
192.168.1.9:/mnt/export /backups nfs4 rw,nosuid,nodev,noexec,sync,soft,sec=krb5p:krb5i:krb5
If the system is mounting file systems via NFS and the "nodev" option is missing, this is a finding.
STIG ID: ALMA-09-023230 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269286
The "noexec" mount option causes the system to not execute binary files. This option must be used for mounting any file system not containing approved binary as they may be incompatible. Executing files from untrusted file systems increases the opportunity for nonprivileged users to attain unauthorized administrative access.
Update each NFS mounted file system to use the "noexec" option on file systems that are being imported via NFS.
Note: If no NFS mounts are configured, this requirement is Not Applicable.
Verify AlmaLinux OS 9 has the "noexec" option configured for all NFS mounts with the following command:
$ grep nfs /etc/fstab
192.168.1.9:/mnt/export /backups nfs4 rw,nosuid,nodev,noexec,sync,soft,sec=krb5p:krb5i:krb5
If the system is mounting file systems via NFS and the "noexec" option is missing, this is a finding.
STIG ID: ALMA-09-023450 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269287
The "nosuid" mount option causes the system not to execute "setuid" and "setgid" files with owner privileges. This option must be used for mounting any file system not containing approved "setuid" and "setguid" files. Executing files from untrusted file systems increases the opportunity for nonprivileged users to attain unauthorized administrative access.
Update each NFS mounted file system to use the "nosuid" option on file systems that are being imported via NFS.
Note: If no NFS mounts are configured, this requirement is Not Applicable.
Verify AlmaLinux OS 9 has the "nosuid" option configured for all NFS mounts with the following command:
$ grep nfs /etc/fstab
192.168.22.2:/mnt/export /data nfs4 rw,nosuid,nodev,noexec,sync,soft,sec=krb5:krb5i:krb5p
If the system is mounting file systems via NFS and the "nosuid" option is missing, this is a finding.
STIG ID: ALMA-09-023560 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269288
To ensure that DNS resolver settings are respected, a DNS mode in Network Manager must be configured.
Configure NetworkManager in AlmaLinux OS 9 to use a DNS mode.
In "/etc/NetworkManager/NetworkManager.conf" add the following line in the "[main]" section:
dns = none
NetworkManager must be reloaded for the change to take effect.
$ systemctl reload NetworkManager
Note: If AlmaLinux OS 9 is configured to use a DNS resolver other than Network Manager, the configuration must be documented and approved by the information system security officer (ISSO).
Verify that AlmaLinux OS 9 has a DNS mode configured in Network Manager.
$ NetworkManager --print-config
[main]
dns=none
If the "dns" key in the [main] section does not exist or is not set to "none" or "default", this is a finding.
STIG ID: ALMA-09-023670 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269289
To provide availability for name resolution services, multiple redundant name servers are mandated. A failure in name resolution could lead to the failure of security functions requiring name resolution, which may include time synchronization, centralized authentication, and remote system logging.
Configure the operating system to use two or more name servers for DNS resolution based on the DNS mode of the system.
If the NetworkManager DNS mode is set to "none" in the [main] section of /etc/NetworkManager/NetworkManager.conf, then add the following lines to "/etc/resolv.conf":
nameserver [name server 1]
nameserver [name server 2]
Replace [name server 1] and [name server 2] with the IPs of two different DNS resolvers.
If the NetworkManager DNS mode is set to "default", then add two DNS servers to a NetworkManager connection using the following commands:
$ nmcli connection modify [connection name] ipv4.dns [name server 1]
$ nmcli connection modify [connection name] ipv4.dns [name server 2]
Replace [name server 1] and [name server 2] with the IPs of two different DNS resolvers. Replace [connection name] with a valid NetworkManager connection name on the system. Replace "ipv4" with "ipv6" if IPv6 DNS servers are used.
Verify the name servers used by the system with the following command:
$ grep nameserver /etc/resolv.conf
nameserver 192.168.2.4
nameserver 192.168.2.5
If less than two lines are returned that are not commented out, this is a finding.
STIG ID: ALMA-09-023780 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269290
The "nodev" mount option causes the system to not interpret character or block special devices. Executing character or block special devices from untrusted file systems increases the opportunity for nonprivileged users to attain unauthorized administrative access.
The only legitimate location for device files is the "/dev" directory located on the root partition, with the exception of chroot jails if implemented.
Configure the "/etc/fstab" to use the "nodev" option on all nonroot local partitions.
Verify all nonroot local partitions are mounted with the "nodev" option with the following command:
$ mount | grep '^/dev\S* on /\S' | grep --invert-match 'nodev'
If any output is produced, this is a finding.
STIG ID: ALMA-09-023890 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269291
An account has root authority if it has a user identifier (UID) of "0". Multiple accounts with a UID of "0" afford more opportunity for potential intruders to guess a password for a privileged account.
Proper configuration of sudo is recommended to afford multiple system administrators access to root privileges in an accountable manner.
Change the UID of any account on the system, other than root which has a UID of "0".
If the account is associated with system commands or applications, the UID should be changed to one greater than "0" but less than "1000". Otherwise, assign a UID of greater than "1000" that has not already been assigned.
Verify that only the "root" account has a UID "0" assignment with the following command:
$ awk -F: '$3 == 0 {print $1}' /etc/passwd
root
If any accounts other than "root" have a UID of "0", this is a finding.
STIG ID: ALMA-09-024000 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269292
The hashes of important files like system executables should match the information given by the RPM database. Executables with erroneous hashes could be a sign of nefarious activity on the system.
Given the output from the check command, identify the package that provides the output and reinstall it.
The following trimmed example output shows a package that has failed verification, been identified, reinstalled, and then passed re-verification:
$ rpm -Va --noconfig | awk '$1 ~ /..5/ && $2 != "c"'
S.5....T. /usr/bin/tar
$ dnf whatprovides /usr/bin/tar
tar-2:1.34-6.el9_1.x86_64 : GNU file archiving program
$ dnf reinstall tar
$ rpm -Va --noconfig | awk '$1 ~ /..5/ && $2 != "c"'
[no output]
The following command will list which files on the system have file hashes different from what is expected by the RPM database:
$ rpm -Va --noconfig | awk '$1 ~ /..5/ && $2 != "c"'
If there is an output, this is a finding.
STIG ID: ALMA-09-024110 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269293
Poisoning writes an arbitrary value to freed pages, so any modification or reference to that page after being freed or before being initialized will be detected and prevented.
This prevents many types of use-after-free vulnerabilities at little performance cost. This also prevents data leaks and detects corrupted memory.
Configure AlmaLinux OS 9 to enable page poisoning with the following commands:
$ grubby --update-kernel=ALL --args="page_poison=1"
Add or modify the following line in "/etc/default/grub" to ensure the configuration survives kernel updates:
GRUB_CMDLINE_LINUX="page_poison=1"
Verify that GRUB 2 is configured to enable page poisoning to mitigate use-after-free vulnerabilities.
Check that the current GRUB 2 configuration has page poisoning enabled with the following command:
$ grubby --info=ALL | grep args | grep -v 'page_poison=1'
If any output is returned, this is a finding.
Check that page poisoning is enabled by default to persist in kernel updates with the following command:
$ grep page_poison /etc/default/grub
GRUB_CMDLINE_LINUX="page_poison=1"
If "page_poison" is not set to "1", is missing or commented out, this is a finding.
STIG ID: ALMA-09-024220 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269294
Users need to be aware of activity that occurs regarding their account. Providing users with information regarding the number of unsuccessful attempts that were made to login to their account allows the user to determine if any unauthorized activity has occurred and gives them an opportunity to notify administrators.
Configure AlmaLinux OS 9 to provide users with feedback on when account accesses last occurred by setting the required configuration options in "/etc/pam.d/postlogin".
Add the following line to the top of "/etc/pam.d/postlogin":
session required pam_lastlog.so showfailed
Verify users are provided with feedback on when account accesses last occurred with the following command:
$ grep pam_lastlog /etc/pam.d/postlogin
session required pam_lastlog.so showfailed
If "pam_lastlog" is missing from "/etc/pam.d/postlogin" file, or the silent option is present, this is a finding.
STIG ID: ALMA-09-024330 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269295
Installing software updates is a fundamental mitigation against the exploitation of publicly known vulnerabilities.
If the most recent security patches and updates are not installed, unauthorized users may take advantage of weaknesses in the unpatched software.
The lack of prompt attention to patching could result in a system compromise.
Install AlmaLinux OS 9 security patches and updates at the organizationally defined frequency. If system updates are installed via a centralized repository that is configured on the system, all updates can be installed with the following command:
$ dnf upgrade
Verify AlmaLinux OS 9 security patches and updates are installed and up to date. Updates are required to be applied with a frequency determined by organizational policy.
Obtain the list of available package security updates from TuxCare. The URL for updates is https://cve.tuxcare.com/els/cve/.
It is important to note that updates may not be present on the system if the underlying packages are not installed.
Check if there are security updates available that have not been installed with the following command:
$ dnf updateinfo list updates security
CLSA-2024:1708029809 Important/Sec. gnutls-3.7.6-21.el9_2.tuxcare.els1.x86_64
CLSA-2024:1708029936 Important/Sec. gnutls-3.7.6-21.el9_2.tuxcare.els2.x86_64
CLSA-2024:1708416911 Important/Sec. libxml2-2.9.13-3.el9_2.1.tuxcare.els1.x86_64
CLSA-2024:1708417063 Moderate/Sec. python3-rpm-4.16.1.3-22.el9.tuxcare.els1.x86_64
CLSA-2024:1708417063 Moderate/Sec. rpm-4.16.1.3-22.el9.tuxcare.els1.x86_64
CLSA-2024:1708417063 Moderate/Sec. rpm-build-libs-4.16.1.3-22.el9.tuxcare.els1.x86_64
CLSA-2024:1708417063 Moderate/Sec. rpm-libs-4.16.1.3-22.el9.tuxcare.els1.x86_64
CLSA-2024:1708417063 Moderate/Sec. rpm-plugin-audit-4.16.1.3-22.el9.tuxcare.els1.x86_64
CLSA-2024:1708417063 Moderate/Sec. rpm-plugin-selinux-4.16.1.3-22.el9.tuxcare.els1.x86_64
CLSA-2024:1708417063 Moderate/Sec. rpm-plugin-systemd-inhibit-4.16.1.3-22.el9.tuxcare.els1.x86_64
CLSA-2024:1708417063 Moderate/Sec. rpm-sign-libs-4.16.1.3-22.el9.tuxcare.els1.x86_64
Typical update frequency may be overridden by Information Assurance Vulnerability Alert (IAVA) notifications from CYBERCOM.
If the system is in not compliant with the organizational patching policy, this is a finding.
STIG ID: ALMA-09-024440 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269296
The policycoreutils-python-utils package is required to operate and manage an SELinux environment and its policies. It provides utilities such as semanage, audit2allow, audit2why, chcat, and sandbox.
Install the policycoreutils-python-utils package with the following command:
$ dnf install policycoreutils-python-utils
Verify that AlmaLinux OS 9 policycoreutils-python-utils service package is installed with the following command:
$ dnf list --installed policycoreutils-python-utils
policycoreutils-python-utils.noarch 3.5-1.el9 @AppStream
If the "policycoreutils-python-utils" package is not installed, this is a finding.
STIG ID: ALMA-09-024550 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269297
The most important characteristic of a random number generator is its randomness, specifically its ability to deliver random numbers that are impossible to predict. Entropy in computer security is associated with the unpredictability of a source of randomness. The random source with high entropy tends to achieve a uniform distribution of random values. Random number generators are one of the most important building blocks of cryptosystems.
The rngd service feeds random data from hardware device to kernel random device. Quality (nonpredictable) random number generation is important for several security functions (i.e., ciphers).
Install the rng-tools package with the following command:
$ dnf install rng-tools
Then enable the rngd service run the following command:
$ systemctl enable --now rngd
Note: For AlmaLinux OS 9 systems running with FIPS mode enabled, this requirement is Not Applicable.
Verify that AlmaLinux OS 9 has enabled the hardware random number generator entropy gatherer service with the following command:
$ systemctl is-active rngd
active
If the "rngd" service is not active, this is a finding.
STIG ID: ALMA-09-024660 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269298
"rng-tools" provides hardware random number generator tools, such as those used in the formation of x509/PKI certificates.
The rng-tools package can be installed with the following command:
$ dnf install rng-tools
Verify that AlmaLinux OS 9 has the rng-tools package installed with the following command:
$ dnf list --installed rng-tools
rng-tools.x86_64 6.15-3.el9 @baseos
If the "rng-tools" package is not installed, this is a finding.
STIG ID: ALMA-09-024770 | SRG: SRG-OS-000480-GPOS-00230 | Severity: medium | CCI: | Vulnerability Id: V-269299
If other users have access to modify user-specific SSH configuration files or read keys, they may be able to log into the system as another user.
To configure the SSH daemon to perform strict mode checking of home directory configuration files, add or modify the following line in "/etc/ssh/sshd_config", or uncomment the line and set the value to "yes":
StrictModes yes
Alternatively, add the setting to an include file if the line "Include /etc/ssh/sshd_config.d/*.conf" is found at the top of the "/etc/ssh/sshd_config" file:
$ echo "StrictModes yes" > /etc/ssh/sshd_config.d/strictmodes.conf
Restart the SSH daemon for the settings to take effect:
$ systemctl restart sshd.service
Verify the SSH daemon performs strict mode checking of home directory configuration files with the following command:
$ sshd -T | grep strictmodes
strictmodes yes
If the "StrictModes" keyword is set to "no", or no output is returned, this is a finding.
STIG ID: ALMA-09-024990 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269300
Ensuring shells are not given to system accounts upon login makes it more difficult for attackers to make use of system accounts.
Configure AlmaLinux OS 9 so that all noninteractive accounts on the system do not have an interactive shell assigned to them.
If the system account needs a shell assigned for mission operations, document the need with the ISSO.
Run the following command to disable the interactive shell for a specific noninteractive user account, replacing
$ usermod --shell /sbin/nologin
Do not perform the steps in this section on the root account. Doing so will cause the system to become inaccessible.
Verify that system accounts must not have an interactive login shell with the following command:
$ awk -F: '($3<1000){print $1 ":" $3 ":" $7}' /etc/passwd
root:0:/bin/bash
bin:1:/sbin/nologin
daemon:2:/sbin/nologin
adm:3:/sbin/nologin
lp:4:/sbin/nologin
sync:5:/bin/sync
shutdown:6:/sbin/shutdown
halt:7:/sbin/halt
mail:8:/sbin/nologin
operator:11:/sbin/nologin
games:12:/sbin/nologin
ftp:14:/sbin/nologin
systemd-coredump:999:/sbin/nologin
dbus:81:/sbin/nologin
polkitd:998:/sbin/nologin
tss:59:/sbin/nologin
sssd:997:/sbin/nologin
unbound:996:/sbin/nologin
fapolicyd:995:/sbin/nologin
postfix:89:/sbin/nologin
sshd:74:/sbin/nologin
chrony:994:/sbin/nologin
systemd-oom:989:/usr/sbin/nologin
Identify the system accounts from this listing that do not have a nologin shell.
If any system account (other than the root account) has a login shell and it is not documented with the information system security officer (ISSO), this is a finding.
STIG ID: ALMA-09-025100 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269301
The "/tmp" partition is used as temporary storage by many programs. Placing "/tmp" in its own partition enables the setting of more restrictive mount options, which can help protect programs that use it.
Migrate the "/tmp" path onto a separate file system.
Verify that a separate file system/partition has been created for "/tmp" with the following command:
$ mount | grep ' /tmp '
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noexec,relatime,seclabel,size=2097152k,inode64)
If a separate entry for "/tmp" is not in use, this is a finding.
STIG ID: ALMA-09-025210 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269302
If user start-up files execute world-writable programs, especially in unprotected directories, they could be maliciously modified to destroy user files or otherwise compromise the system at the user level.
If the system is compromised at the user level, it is easier to elevate privileges to eventually compromise the system at the root and network level.
Set the mode on files being executed by the local initialization files with the following command:
$ chmod 0755
Verify that local initialization files do not execute world-writable programs with the following command:
Note: The example will be for a system that is configured to create user home directories in the "/home" directory.
$ find /home -perm -002 -type f -name ".[^.]*" -exec ls -ld {} \;
If any local initialization files are found to reference world-writable files, this is a finding.
STIG ID: ALMA-09-025320 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269303
Placing "/var/log" in its own partition enables better separation between log files and other files in "/var/".
Migrate the "/var/log" path onto a separate file system.
Verify that a separate file system/partition has been created for "/var/log" with the following command:
$ mount | grep ' /var/log '
/dev/mapper/luks-e0d162f5-fad8-463e-8e39-6bd09e672961 on /var/log type xfs (rw,nosuid,nodev,noexec,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota)
If a separate entry for "/var/log" is not in use, this is a finding.
STIG ID: ALMA-09-025430 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269304
Ensuring that "/var" is mounted on its own partition enables the setting of more restrictive mount options. This helps protect system services such as daemons or other programs which use it. It is not uncommon for the "/var" directory to contain world-writable directories installed by other software packages.
Migrate the "/var" path onto a separate file system.
Verify that a separate file system/partition has been created for "/var" with the following command:
$ mount | grep ' /var '
/dev/mapper/luks-b23d8276-7844-4e79-8a58-505150b6eb42 on /var type xfs (rw,nosuid,nodev,noexec,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota)
If a separate entry for "/var" is not in use, this is a finding.
STIG ID: ALMA-09-025540 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269305
The "/var/tmp" partition is used as temporary storage by many programs. Placing "/var/tmp" in its own partition enables the setting of more restrictive mount options, which can help protect programs that use it.
Migrate the "/var/tmp" path onto a separate file system.
Verify that a separate file system/partition has been created for "/var/tmp" with the following command:
$ mount | grep /var/tmp
/dev/mapper/luks-0e7206e7-bfb1-4a23-ae14-b9cea7cf76d5 on /var/tmp type xfs (rw,nosuid,nodev,noexec,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota)
If a separate entry for "/var/tmp" is not in use, this is a finding.
STIG ID: ALMA-09-025650 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269306
System calls are special routines in the Linux kernel, which userspace applications ask to do privileged tasks. Invoking a system call is an expensive operation because the processor must interrupt the currently executing task and switch context to kernel mode, and then switch back to userspace after the system call completes. Virtual system calls map a page into userspace that contains some variables and the implementation of some system calls. This allows the system calls to be executed in userspace to alleviate the context switching expense.
Virtual system calls provide an opportunity of attack for a user who has control of the return instruction pointer. Disabling virtual system calls help to prevent return oriented programming (ROP) attacks via buffer overflows and overruns.
Document the use of virtual system calls with the ISSO as an operational requirement, or disable them with the following command:
$ grubby --update-kernel=ALL --args="vsyscall=none"
Add or modify the following line in "/etc/default/grub" to ensure the configuration survives kernel updates:
GRUB_CMDLINE_LINUX="vsyscall=none"
Verify the current GRUB 2 configuration disables virtual system calls with the following command:
$ grubby --info=ALL | grep args | grep -v 'vsyscall=none'
If any output is returned, this is a finding.
Check that virtual system calls are disabled by default to persist in kernel updates with the following command:
$ grep vsyscall /etc/default/grub
GRUB_CMDLINE_LINUX="vsyscall=none"
If "vsyscall" is not set to "none", is missing or commented out, and is not documented with the information system security officer (ISSO) as an operational requirement, this is a finding.
STIG ID: ALMA-09-025760 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269307
Cron logging can be used to trace the successful or unsuccessful execution of cron jobs. It can also be used to spot intrusions into the use of the cron facility by unauthorized and malicious users.
Configure "rsyslog" to log all cron messages by adding or updating the following line to "/etc/rsyslog.conf" or a configuration file in the /etc/rsyslog.d/ directory:
cron.* /var/log/cron
The rsyslog daemon must be restarted for the changes to take effect:
$ systemctl restart rsyslog.service
Verify that "rsyslog" is configured to log cron events with the following command:
Note: If another logging package is used, substitute the utility configuration file for "/etc/rsyslog.conf" or "/etc/rsyslog.d/*.conf" files.
$ grep -s cron /etc/rsyslog.conf /etc/rsyslog.d/*.conf
/etc/rsyslog.conf:*.info;mail.none;authpriv.none;cron.none /var/log/messages
/etc/rsyslog.conf:# Log cron stuff
/etc/rsyslog.conf:cron.* /var/log/cron
If the command does not return a response, check for cron logging all facilities with the following command:
$ grep -s /var/log/messages /etc/rsyslog.conf /etc/rsyslog.d/*.conf
/etc/rsyslog.conf:*.info;mail.none;authpriv.none;cron.none /var/log/messages
If "rsyslog" is not logging messages for the cron facility or all facilities, this is a finding.
STIG ID: ALMA-09-025870 | SRG: SRG-OS-000480-GPOS-00227 | Severity: medium | CCI: | Vulnerability Id: V-269308
Unintentionally running a rsyslog server accepting remote messages puts the system at increased risk. Malicious rsyslog messages sent to the server could exploit vulnerabilities in the server software itself, could introduce misleading information into the system's logs, or could fill the system's storage leading to a denial of service.
If the system is intended to be a log aggregation server, its use must be documented with the information system security officer (ISSO).
Configure AlmaLinux OS 9 to not receive remote logs using rsyslog.
Remove the lines in /etc/rsyslog.conf and any files in the /etc/rsyslog.d directory that match any of the following:
$ModLoad imtcp
$ModLoad imudp
$ModLoad imrelp
$InputTCPServerRun [0-9]*
$UDPServerRun [0-9]*
$InputRELPServerRun [0-9]*
The rsyslog daemon must be restarted for the changes to take effect:
$ systemctl restart rsyslog.service
Verify that AlmaLinux OS 9 is not configured to receive remote logs using rsyslog with the following commands:
$ grep -i modload /etc/rsyslog.conf /etc/rsyslog.d/*
$ModLoad imtcp
$ModLoad imrelp
$ grep -i serverrun /etc/rsyslog.conf /etc/rsyslog.d/*
$InputTCPServerRun 514
$InputRELPServerRun 514
Note: An error regarding no files or directories may be returned. This is not a finding.
If any lines are returned by the command, then rsyslog is configured to receive remote messages, and this is a finding.
If any modules are being loaded in the "/etc/rsyslog.conf" file or in the "/etc/rsyslog.d" subdirectories, ask to view the documentation for the system being used for log aggregation. If the documentation does not exist or does not specify the server as a log aggregation system, this is a finding.
STIG ID: ALMA-09-025980 | SRG: SRG-OS-000480-GPOS-00230 | Severity: medium | CCI: | Vulnerability Id: V-269309
The "nosuid" mount option causes the system to not execute "setuid" and "setgid" files with owner privileges.
This option must be used for mounting any file system not containing approved "setuid" and "setguid" files.
Executing files from untrusted file systems increases the opportunity for nonprivileged users to attain unauthorized administrative access.
Satisfies: SRG-OS-000480-GPOS-00230, SRG-OS-000368-GPOS-00154
Modify "/etc/fstab" to use the "nosuid" option on the "/home" directory.
Verify "/home" is mounted with the "nosuid" option with the following command:
Note: If a separate file system has not been created for the user home directories (user home directories are mounted under "/"), this is automatically a finding, as the "nosuid" option cannot be used on the "/" system.
$ mount | grep /home
/dev/mapper/luks-10a20c46-483d-4d12-831f-5328eda18fd1 on /home type xfs (rw,nosuid,nodev,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota)
If the "/home" file system is mounted without the "nosuid" option, this is a finding.
STIG ID: ALMA-09-026090 | SRG: SRG-OS-000368-GPOS-00154 | Severity: medium | CCI: | Vulnerability Id: V-269310
The "nodev" mount option causes the system to not interpret character or block special devices. Executing character or block special devices from untrusted file systems increases the opportunity for nonprivileged users to attain unauthorized administrative access.
The only legitimate location for device files is the "/dev" directory located on the root partition, with the exception of chroot jails if implemented.
Modify "/etc/fstab" to use the "nodev" option on the "/home" directory.
Verify "/home" is mounted with the "nodev" option with the following command:
Note: If a separate file system has not been created for the user home directories (user home directories are mounted under "/"), this is automatically a finding, as the "nodev" option cannot be used on the "/" system.
$ mount | grep /home
/dev/mapper/luks-10a20c46-483d-4d12-831f-5328eea18fd1 on /home type xfs (rw,nosuid,nodev,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota)
If the "/home" file system is mounted without the "nodev" option, this is a finding.
STIG ID: ALMA-09-026200 | SRG: SRG-OS-000368-GPOS-00154 | Severity: medium | CCI: | Vulnerability Id: V-269311
The "nosuid" mount option causes the system not to execute "setuid" and "setgid" files with owner privileges. This option must be used for mounting any file system not containing approved "setuid" and "setguid" files.
Executing files from untrusted file systems increases the opportunity for nonprivileged users to attain unauthorized administrative access.
Modify "/etc/fstab" to use the "nosuid" option on the "/boot/efi" directory.
Note: For systems that use BIOS, this requirement is Not Applicable.
Verify the /boot/efi directory is mounted with the "nosuid" option with the following command:
$ mount | grep '\s/boot/efi\s'
/dev/sda1 on /boot/efi type vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=ascii,shortname=winnt,errors=remount-ro)
If the /boot/efi file system does not have the "nosuid" option set, this is a finding.
STIG ID: ALMA-09-026310 | SRG: SRG-OS-000368-GPOS-00154 | Severity: medium | CCI: | Vulnerability Id: V-269312
The only legitimate location for device files is the "/dev" directory located on the root partition. The only exception to this is chroot jails.
Modify "/etc/fstab" to use the "nodev" option on the "/boot" directory.
Verify that the "/boot" mount point has the "nodev" option is with the following command:
$ mount | grep '\s/boot\s'
/dev/sda2 on /boot type xfs (rw,nosuid,nodev,noexec,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota)
If the "/boot" file system does not have the "nodev" option set, this is a finding.
STIG ID: ALMA-09-026420 | SRG: SRG-OS-000368-GPOS-00154 | Severity: medium | CCI: | Vulnerability Id: V-269313
The "nosuid" mount option causes the system not to execute "setuid" and "setgid" files with owner privileges. This option must be used for mounting any file system not containing approved "setuid" and "setguid" files.
Executing files from untrusted file systems increases the opportunity for nonprivileged users to attain unauthorized administrative access.
Modify "/etc/fstab" to use the "nosuid" option on the "/boot" directory.
Verify the /boot directory is mounted with the "nosuid" option with the following command:
$ mount | grep '\s/boot\s'
/dev/sda2 on /boot type xfs (rw,nosuid,nodev,noexec,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota)
If the /boot file system does not have the "nosuid" option set, this is a finding.
STIG ID: ALMA-09-026530 | SRG: SRG-OS-000368-GPOS-00154 | Severity: medium | CCI: | Vulnerability Id: V-269314
The "nodev" mount option causes the system to not interpret character or block special devices. Executing character or block special devices from untrusted file systems increases the opportunity for nonprivileged users to attain unauthorized administrative access.
The only legitimate location for device files is the "/dev" directory located on the root partition, with the exception of chroot jails if implemented.
Modify "/etc/fstab" to use the "nodev" option on the "/dev/shm" file system.
Verify "/dev/shm" is mounted with the "nodev" option with the following command:
$ mount | grep /dev/shm
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev,noexec,seclabel,size=2097152k,inode64)
If the /dev/shm file system is mounted without the "nodev" option, this is a finding.
STIG ID: ALMA-09-026640 | SRG: SRG-OS-000368-GPOS-00154 | Severity: medium | CCI: | Vulnerability Id: V-269315
The "noexec" mount option causes the system to not execute binary files. This option must be used for mounting any file system not containing approved binary files, as they may be incompatible.
Executing files from untrusted file systems increases the opportunity for nonprivileged users to attain unauthorized administrative access.
Modify "/etc/fstab" to use the "noexec" option on the "/dev/shm" file system.
Verify "/dev/shm" is mounted with the "noexec" option with the following command:
$ mount | grep /dev/shm
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev,noexec,seclabel,size=2097152k,inode64)
If the /dev/shm file system is mounted without the "noexec" option, this is a finding.
STIG ID: ALMA-09-026750 | SRG: SRG-OS-000368-GPOS-00154 | Severity: medium | CCI: | Vulnerability Id: V-269316
The "nosuid" mount option causes the system to not execute "setuid" and "setgid" files with owner privileges. This option must be used for mounting any file system not containing approved "setuid" and "setguid" files.
Executing files from untrusted file systems increases the opportunity for nonprivileged users to attain unauthorized administrative access.
Modify "/etc/fstab" to use the "nosuid" option on the "/dev/shm" file system.
Verify "/dev/shm" is mounted with the "nosuid" option with the following command:
$ mount | grep /dev/shm
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev,noexec,seclabel,size=2097152k,inode64)
If the /dev/shm file system is mounted without the "noexec" option, this is a finding.
STIG ID: ALMA-09-026860 | SRG: SRG-OS-000368-GPOS-00154 | Severity: medium | CCI: | Vulnerability Id: V-269317
The "nodev" mount option causes the system to not interpret character or block special devices. Executing character or block special devices from untrusted file systems increases the opportunity for nonprivileged users to attain unauthorized administrative access.
The only legitimate location for device files is the "/dev" directory located on the root partition, with the exception of chroot jails if implemented.
Modify "/etc/fstab" to use the "nodev" option on the "/tmp" directory.
Verify "/tmp" is mounted with the "nodev" option:
$ mount | grep ' /tmp'
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noexec,relatime,seclabel,size=2097152k,inode64)
If the "/tmp" file system is mounted without the "nodev" option, this is a finding.
STIG ID: ALMA-09-026970 | SRG: SRG-OS-000368-GPOS-00154 | Severity: medium | CCI: | Vulnerability Id: V-269318
The "noexec" mount option causes the system to not execute binary files. This option must be used for mounting any file system not containing approved binary files, as they may be incompatible.
Executing files from untrusted file systems increases the opportunity for nonprivileged users to attain unauthorized administrative access.
Modify "/etc/fstab" to use the "noexec" option on the "/tmp" directory.
Verify "/tmp" is mounted with the "noexec" option:
$ mount | grep ' /tmp'
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noexec,relatime,seclabel,size=2097152k,inode64)
If the "/tmp" file system is mounted without the "noexec" option, this is a finding.
STIG ID: ALMA-09-027080 | SRG: SRG-OS-000368-GPOS-00154 | Severity: medium | CCI: | Vulnerability Id: V-269319
The "nosuid" mount option causes the system to not execute "setuid" and "setgid" files with owner privileges. This option must be used for mounting any file system not containing approved "setuid" and "setguid" files.
Executing files from untrusted file systems increases the opportunity for nonprivileged users to attain unauthorized administrative access.
Modify "/etc/fstab" to use the "nosuid" option on the "/tmp" directory.
Verify "/tmp" is mounted with the "nosuid" option:
$ mount | grep ' /tmp'
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noexec,relatime,seclabel,size=2097152k,inode64)
If the "/tmp" file system is mounted without the "nosuid" option, this is a finding.
STIG ID: ALMA-09-027190 | SRG: SRG-OS-000368-GPOS-00154 | Severity: medium | CCI: | Vulnerability Id: V-269320
The "nodev" mount option causes the system to not interpret character or block special devices. Executing character or block special devices from untrusted file systems increases the opportunity for nonprivileged users to attain unauthorized administrative access.
The only legitimate location for device files is the "/dev" directory located on the root partition, with the exception of chroot jails if implemented.
Modify "/etc/fstab" to use the "nodev" option on the "/var/log/audit" directory.
Verify "/var/log/audit" is mounted with the "nodev" option:
$ mount | grep /var/log/audit
/dev/mapper/luks-29b74747-2f82-4472-82f5-0b5eb763effc on /var/log/audit type xfs (rw,nosuid,nodev,noexec,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota)
If the "/var/log/audit" file system is mounted without the "nodev" option, this is a finding.
STIG ID: ALMA-09-027300 | SRG: SRG-OS-000368-GPOS-00154 | Severity: medium | CCI: | Vulnerability Id: V-269321
The "noexec" mount option causes the system to not execute binary files. This option must be used for mounting any file system not containing approved binary files, as they may be incompatible.
Executing files from untrusted file systems increases the opportunity for nonprivileged users to attain unauthorized administrative access.
Modify "/etc/fstab" to use the "noexec" option on the "/var/log/audit" directory.
Verify "/var/log/audit" is mounted with the "noexec" option:
$ mount | grep /var/log/audit
/dev/mapper/luks-29b74747-2f82-4472-82f5-0b5eb763effc on /var/log/audit type xfs (rw,nosuid,nodev,noexec,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota)
If the "/var/log/audit" file system is mounted without the "noexec" option, this is a finding.
STIG ID: ALMA-09-027410 | SRG: SRG-OS-000368-GPOS-00154 | Severity: medium | CCI: | Vulnerability Id: V-269322
The "nosuid" mount option causes the system to not execute "setuid" and "setgid" files with owner privileges. This option must be used for mounting any file system not containing approved "setuid" and "setguid" files.
Executing files from untrusted file systems increases the opportunity for nonprivileged users to attain unauthorized administrative access.
Modify "/etc/fstab" to use the "nosuid" option on the "/var/log/audit" directory.
Verify "/var/log/audit" is mounted with the "nosuid" option:
$ mount | grep /var/log/audit
/dev/mapper/luks-29b74747-2f82-4472-82f5-0b5eb763effc on /var/log/audit type xfs (rw,nosuid,nodev,noexec,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota)
If the "/var/log/audit" file system is mounted without the "nosuid" option, this is a finding.
STIG ID: ALMA-09-027520 | SRG: SRG-OS-000368-GPOS-00154 | Severity: medium | CCI: | Vulnerability Id: V-269323
The "nodev" mount option causes the system to not interpret character or block special devices. Executing character or block special devices from untrusted file systems increases the opportunity for nonprivileged users to attain unauthorized administrative access.
The only legitimate location for device files is the "/dev" directory located on the root partition, with the exception of chroot jails if implemented.
Modify "/etc/fstab" to use the "nodev" option on the "/var/log" directory.
Verify "/var/log" is mounted with the "nodev" option:
$ mount | grep '/var/log '
/dev/mapper/luks-e0d162f5-fad8-463e-8e39-6bd09e672961 on /var/log type xfs (rw,nosuid,nodev,noexec,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota)
If the "/var/log" file system is mounted without the "nodev" option, this is a finding.
STIG ID: ALMA-09-027630 | SRG: SRG-OS-000368-GPOS-00154 | Severity: medium | CCI: | Vulnerability Id: V-269324
The "noexec" mount option causes the system to not execute binary files. This option must be used for mounting any file system not containing approved binary files, as they may be incompatible.
Executing files from untrusted file systems increases the opportunity for nonprivileged users to attain unauthorized administrative access.
Modify "/etc/fstab" to use the "noexec" option on the "/var/log" directory.
Verify "/var/log" is mounted with the "noexec" option:
$ mount | grep '/var/log '
/dev/mapper/luks-e0d162f5-fad8-463e-8e39-6bd09e672961 on /var/log type xfs (rw,nosuid,nodev,noexec,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota)
If the "/var/log" file system is mounted without the "noexec" option, this is a finding.
STIG ID: ALMA-09-027740 | SRG: SRG-OS-000368-GPOS-00154 | Severity: medium | CCI: | Vulnerability Id: V-269325
The "nosuid" mount option causes the system to not execute "setuid" and "setgid" files with owner privileges. This option must be used for mounting any file system not containing approved "setuid" and "setguid" files.
Executing files from untrusted file systems increases the opportunity for nonprivileged users to attain unauthorized administrative access.
Modify "/etc/fstab" to use the "nosuid" option on the "/var/log" directory.
Verify "/var/log" is mounted with the "nosuid" option:
$ mount | grep '/var/log '
/dev/mapper/luks-e0d162f5-fad8-463e-8e39-6bd09e672961 on /var/log type xfs (rw,nosuid,nodev,noexec,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota)
If the "/var/log" file system is mounted without the "nosuid" option, this is a finding.
STIG ID: ALMA-09-027850 | SRG: SRG-OS-000368-GPOS-00154 | Severity: medium | CCI: | Vulnerability Id: V-269326
The "nodev" mount option causes the system to not interpret character or block special devices. Executing character or block special devices from untrusted file systems increases the opportunity for nonprivileged users to attain unauthorized administrative access.
The only legitimate location for device files is the "/dev" directory located on the root partition, with the exception of chroot jails if implemented.
Modify "/etc/fstab" to use the "nodev" option on the "/var" directory.
Verify "/var" is mounted with the "nodev" option:
$ mount | grep ' /var '
/dev/mapper/luks-b23d8276-7844-4e79-8a58-505150b6eb42 on /var type xfs (rw,nosuid,nodev,noexec,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota)
If the "/var" file system is mounted without the "nodev" option, this is a finding.
STIG ID: ALMA-09-027960 | SRG: SRG-OS-000368-GPOS-00154 | Severity: medium | CCI: | Vulnerability Id: V-269327
The "nodev" mount option causes the system to not interpret character or block special devices. Executing character or block special devices from untrusted file systems increases the opportunity for nonprivileged users to attain unauthorized administrative access.
The only legitimate location for device files is the "/dev" directory located on the root partition, with the exception of chroot jails if implemented.
Modify "/etc/fstab" to use the "nodev" option on the "/var/tmp" directory.
Verify "/var/tmp" is mounted with the "nodev" option:
$ mount | grep /var/tmp
/dev/mapper/luks-0e7206e7-bfb1-4a23-ae14-b9cea7cf76d5 on /var/tmp type xfs (rw,nosuid,nodev,noexec,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota)
If the "/var/tmp" file system is mounted without the "nodev" option, this is a finding.
STIG ID: ALMA-09-028070 | SRG: SRG-OS-000368-GPOS-00154 | Severity: medium | CCI: | Vulnerability Id: V-269328
The "noexec" mount option causes the system to not execute binary files. This option must be used for mounting any file system not containing approved binary files, as they may be incompatible.
Executing files from untrusted file systems increases the opportunity for nonprivileged users to attain unauthorized administrative access.
Modify "/etc/fstab" to use the "noexec" option on the "/var/tmp" directory.
Verify "/var/tmp" is mounted with the "noexec" option:
$ mount | grep /var/tmp
/dev/mapper/luks-0e7206e7-bfb1-4a23-ae14-b9cea7cf76d5 on /var/tmp type xfs (rw,nosuid,nodev,noexec,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota)
If the "/var/tmp" file system is mounted without the "noexec" option, this is a finding.
STIG ID: ALMA-09-028180 | SRG: SRG-OS-000368-GPOS-00154 | Severity: medium | CCI: | Vulnerability Id: V-269329
The "nosuid" mount option causes the system to not execute "setuid" and "setgid" files with owner privileges. This option must be used for mounting any file system not containing approved "setuid" and "setguid" files.
Executing files from untrusted file systems increases the opportunity for nonprivileged users to attain unauthorized administrative access.
Modify "/etc/fstab" to use the "nosuid" option on the "/var/tmp" directory.
Verify "/var/tmp" is mounted with the "nosuid" option:
$ mount | grep /var/tmp
/dev/mapper/luks-0e7206e7-bfb1-4a23-ae14-b9cea7cf76d5 on /var/tmp type xfs (rw,nosuid,nodev,noexec,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota)
If the "/var/tmp" file system is mounted without the "nosuid" option, this is a finding.
STIG ID: ALMA-09-028290 | SRG: SRG-OS-000370-GPOS-00155 | Severity: medium | CCI: | Vulnerability Id: V-269330
The organization must identify authorized software programs and permit execution of authorized software. The process used to identify software programs that are authorized to execute on organizational information systems is commonly referred to as allowlisting.
Utilizing an allowlist provides a configuration management method for allowing the execution of only authorized software. Using only authorized software decreases risk by limiting the number of potential vulnerabilities. Verification of allowlisted software occurs prior to execution or at system startup.
User home directories/folders may contain information of a sensitive nature. Nonprivileged users should coordinate any sharing of information with a system administrator (SA) through shared resources.
AlmaLinux OS 9 ships with many optional packages. One such package is a file access policy daemon called "fapolicyd". "fapolicyd" is a userspace daemon that determines access rights to files based on attributes of the process and file. It can be used to either blocklist or allowlist processes or file access.
Proceed with caution with enforcing the use of this daemon. Improper configuration may render the system nonfunctional. The "fapolicyd" API is not namespace aware and can cause issues when launching or running containers.
Enable the fapolicyd with the following command:
$ systemctl enable --now fapolicyd
Verify that AlmaLinux OS 9 fapolicyd is active with the following command:
$ systemctl status fapolicyd
fapolicyd.service - File Access Policy Daemon
Loaded: loaded (/usr/lib/systemd/system/fapolicyd.service; enabled; preset: disabled)
Active: active (running) since Thu 2024-02-08 09:42:05 UTC; 3h 38min ago
If fapolicyd module is not active, this is a finding.
STIG ID: ALMA-09-028400 | SRG: SRG-OS-000370-GPOS-00155 | Severity: medium | CCI: | Vulnerability Id: V-269331
The organization must identify authorized software programs and permit execution of authorized software. The process used to identify software programs that are authorized to execute on organizational information systems is commonly referred to as allowlisting.
Utilizing an allowlist provides a configuration management method for allowing the execution of only authorized software. Using only authorized software decreases risk by limiting the number of potential vulnerabilities. Verification of allowlisted software occurs prior to execution or at system startup.
User home directories/folders may contain information of a sensitive nature. Nonprivileged users should coordinate any sharing of information with a system administrator (SA) through shared resources.
AlmaLinux OS 9 ships with many optional packages. One such package is a file access policy daemon called "fapolicyd". "fapolicyd" is a userspace daemon that determines access rights to files based on attributes of the process and file. It can be used to either blocklist or allowlist processes or file access.
Proceed with caution with enforcing the use of this daemon. Improper configuration may render the system nonfunctional. The "fapolicyd" API is not namespace aware and can cause issues when launching or running containers.
Install the fapolicyd package with the following command:
$ dnf install fapolicyd
Verify that AlmaLinux OS 9 fapolicyd package is installed with the following command:
$ dnf list --installed fapolicyd
Installed Packages
fapolicyd.x86_64 1.1.3-104.el9 @AppStream
If the "fapolicyd" package is not installed, this is a finding.
STIG ID: ALMA-09-028510 | SRG: SRG-OS-000095-GPOS-00049 | Severity: medium | CCI: | Vulnerability Id: V-269332
Not exposing the management interface of the chrony daemon on the network reduces the attack surface.
Configure AlmaLinux OS 9 to disable remote management of the chrony daemon by adding/modifying the following line in the /etc/chrony.conf file:
cmdport 0
Verify AlmaLinux OS 9 disables remote management of the chrony daemon with the following command:
$ chronyd -p | grep -w cmdport
cmdport 0
If the "cmdport" option is not set to "0" or is missing, this is a finding.
STIG ID: ALMA-09-028620 | SRG: SRG-OS-000095-GPOS-00049 | Severity: medium | CCI: | Vulnerability Id: V-269333
Being able to determine the system time of a server can be useful information for various attacks from timebomb attacks to location discovery based on time zone.
Minimizing the exposure of the server functionality of the chrony daemon reduces the attack surface.
Configure AlmaLinux OS 9 to disable the chrony daemon from acting as a server by adding/modifying the following line in the /etc/chrony.conf file:
port 0
Verify AlmaLinux OS 9 disables the chrony daemon from acting as a server with the following command:
$ chronyd -p | grep -w port
port 0
If the "port" option is not set to "0" or is missing, this is a finding.
STIG ID: ALMA-09-028730 | SRG: SRG-OS-000095-GPOS-00049 | Severity: medium | CCI: | Vulnerability Id: V-269334
The iprutils package provides a suite of utilities to manage and configure SCSI devices supported by the ipr SCSI storage device driver.
Remove the iprutils package with the following command:
$ dnf remove iprutils
Verify that the iprutils package is not installed with the following command:
$ dnf list --installed iprutils
Error: No matching Packages to list
If the "iprutils" package is installed and is not documented with the information system security officer (ISSO) as an operational requirement, this is a finding.
STIG ID: ALMA-09-028840 | SRG: SRG-OS-000095-GPOS-00049 | Severity: medium | CCI: | Vulnerability Id: V-269335
Quagga is a network routing software suite providing implementations of Open Shortest Path First (OSPF), Routing Information Protocol (RIP), Border Gateway Protocol (BGP) for Unix and Linux platforms.
If there is no need to make the router software available, removing it provides a safeguard against its activation.
Remove the quagga package with the following command:
$ dnf remove quagga
Verify that the quagga package is not installed with the following command:
$ dnf list --installed quagga
Error: No matching Packages to list
If the "quagga" package is installed, and is not documented with the information system security officer (ISSO) as an operational requirement, this is a finding.
STIG ID: ALMA-09-028950 | SRG: SRG-OS-000095-GPOS-00049 | Severity: medium | CCI: | Vulnerability Id: V-269336
The sendmail software was not developed with security in mind, and its design prevents it from being effectively contained by SELinux. Postfix must be used instead.
Remove the sendmail package with the following command:
$ dnf remove sendmail
Verify that the sendmail package is not installed with the following command:
$ dnf list --installed sendmail
Error: No matching Packages to list
If the "sendmail" package is installed, this is a finding.
STIG ID: ALMA-09-029060 | SRG: SRG-OS-000095-GPOS-00049 | Severity: medium | CCI: | Vulnerability Id: V-269337
It is detrimental for operating systems to provide, or install by default, functionality exceeding requirements or mission objectives. These unnecessary capabilities are often overlooked and therefore, may remain unsecure. They increase the risk to the platform by providing additional attack vectors.
The telnet service provides an unencrypted remote access service, which does not provide for the confidentiality and integrity of user passwords or the remote session. If a privileged user were to login using this service, the privileged user password could be compromised.
Removing the "telnet-server" package decreases the risk of accidental (or intentional) activation of the telnet service.
Remove the telnet-server package with the following command:
$ dnf remove telnet-server
Verify that the telnet-server package is not installed with the following command:
$ dnf list --installed telnet-server
Error: No matching Packages to list
If the "telnet-server" package is installed, this is a finding.
STIG ID: ALMA-09-029170 | SRG: SRG-OS-000095-GPOS-00049 | Severity: medium | CCI: | Vulnerability Id: V-269338
If TFTP is required for operational support (such as transmission of router configurations), its use must be documented with the information systems security manager (ISSM), restricted to only authorized personnel, and have access control rules established.
Remove the tftp package with the following command:
$ dnf remove tftp
Verify that the tftp package is not installed with the following command:
$ dnf list --installed tftp
If the "tftp" package is installed, this is a finding.
STIG ID: ALMA-09-029390 | SRG: SRG-OS-000095-GPOS-00049 | Severity: medium | CCI: | Vulnerability Id: V-269339
The cups package provides printer drivers as well as a print server, webserver, and discovery mechanisms. Removing the package reduces the potential attack surface.
Remove the cups package with the following command:
$ dnf remove cups
Verify that the cups package is not installed with the following command:
$ dnf list –installed cups
Error: No matching Packages to list
If the "cups" package is installed, this is a finding.
STIG ID: ALMA-09-029500 | SRG: SRG-OS-000095-GPOS-00049 | Severity: medium | CCI: | Vulnerability Id: V-269340
The gssproxy package is a proxy for GSS API credential handling and could expose secrets on some networks. It is not needed for normal function of the OS.
Remove the gssproxy package with the following command:
$ dnf remove gssproxy
Verify that the gssproxy package is not installed with the following command:
$ dnf list --installed gssproxy
Error: No matching Packages to list
If the "gssproxy" package is installed and is not documented with the information system security officer (ISSO) as an operational requirement, this is a finding.
STIG ID: ALMA-09-029610 | SRG: SRG-OS-000095-GPOS-00049 | Severity: medium | CCI: | Vulnerability Id: V-269341
The ATM is a transport layer protocol designed for digital transmission of multiple types of traffic, including telephony (voice), data, and video signals, in one network without the use of separate overlay networks.
Disabling ATM protects the system against exploitation of any flaws in its implementation.
To configure the system to prevent the atm kernel module from being loaded, run the following command:
$ cat << EOF | tee /etc/modprobe.d/atm.conf
install atm /bin/false
blacklist atm
EOF
Verify that AlmaLinux OS 9 disables the ability to load the atm kernel module with the following command:
$ grep -r atm /etc/modprobe.conf /etc/modprobe.d/*
/etc/modprobe.d/atm.conf:install atm /bin/false
/etc/modprobe.d/atm.conf:blacklist atm
If the command does not return any output, or the line is commented out, and use of atm is not documented with the information system security officer (ISSO) as an operational requirement, this is a finding.
STIG ID: ALMA-09-029720 | SRG: SRG-OS-000095-GPOS-00049 | Severity: medium | CCI: | Vulnerability Id: V-269342
This requirement applies to wireless peripheral technologies (e.g., wireless mice, keyboards, displays, etc.) used with AlmaLinux OS 9 systems.
Wireless peripherals (e.g., Wi-Fi/Bluetooth/IR keyboards, mice and pointing devices, and near field communications [NFC]) present a unique challenge by creating an open, unsecured port on a computer. Wireless peripherals must meet DOD requirements for wireless data transmission and be approved for use by the authorizing official (AO). Even though some wireless peripherals, such as mice and pointing devices, do not ordinarily carry information that need to be protected, modification of communications with these wireless peripherals may be used to compromise the AlmaLinux OS 9 operating system.
To configure the system to prevent the Bluetooth kernel module from being loaded, run the following command:
$ cat << EOF | tee /etc/modprobe.d/bluetooth.conf
install bluetooth /bin/false
blacklist bluetooth
EOF
Verify that AlmaLinux OS 9 disables the ability to load the Bluetooth kernel module with the following command:
$ grep -r bluetooth /etc/modprobe.conf /etc/modprobe.d/*
/etc/modprobe.d/bluetooth.conf:install bluetooth /bin/false
/etc/modprobe.d/bluetooth.conf:blacklist bluetooth
If the command does not return any output, or the line is commented out, and use of Bluetooth is not documented with the information system security officer (ISSO) as an operational requirement, this is a finding.
STIG ID: ALMA-09-029830 | SRG: SRG-OS-000095-GPOS-00049 | Severity: medium | CCI: | Vulnerability Id: V-269343
The CAN protocol is a robust vehicle bus standard designed to allow microcontrollers and devices to communicate with each other's applications without a host computer.
Disabling CAN protects the system against exploitation of any flaws in its implementation.
To configure the system to prevent the can kernel module from being loaded, run the following command:
$ cat << EOF | tee /etc/modprobe.d/can.conf
install can /bin/false
blacklist can
EOF
Verify that AlmaLinux OS 9 disables the ability to load the can kernel module with the following command:
$ grep -r can /etc/modprobe.conf /etc/modprobe.d/*
/etc/modprobe.d/can.conf:install can /bin/false
/etc/modprobe.d/can.conf:blacklist can
If the command does not return any output, or the line is commented out, and use of CAN is not documented with the information system security officer (ISSO) as an operational requirement, this is a finding.
STIG ID: ALMA-09-029940 | SRG: SRG-OS-000095-GPOS-00049 | Severity: medium | CCI: | Vulnerability Id: V-269344
Removing support for unneeded filesystem types reduces the local attack surface of the server.
Compressed ROM/RAM file system (or cramfs) is a read-only file system designed for simplicity and space-efficiency. It is mainly used in embedded and small-footprint systems.
To configure the system to prevent the cramfs kernel module from being loaded, create a *.conf file in /etc/modprobe.d/ with the following content:
install cramfs /bin/false
blacklist cramfs
Verify that AlmaLinux OS 9 disables the ability to load the cramfs kernel module with the following command:
$ grep cramfs /etc/modprobe.conf /etc/modprobe.d/*
blacklist cramfs
If the command does not return any output, or the line is commented out, and use of cramfs is not documented with the information system security officer (ISSO) as an operational requirement, this is a finding.
STIG ID: ALMA-09-030050 | SRG: SRG-OS-000095-GPOS-00049 | Severity: medium | CCI: | Vulnerability Id: V-269345
The SCTP is a transport layer protocol, designed to support the idea of message-oriented communication, with several streams of messages within one connection.
Disabling SCTP protects the system against exploitation of any flaws in its implementation.
To configure the system to prevent the SCTP kernel module from being loaded, run the following command:
$ cat << EOF | tee /etc/modprobe.d/sctp.conf
install sctp /bin/false
blacklist sctp
EOF
Verify that AlmaLinux OS 9 disables the ability to load the SCTP kernel module with the following command:
$ grep -r sctp /etc/modprobe.conf /etc/modprobe.d/*
/etc/modprobe.d/sctp.conf:install sctp /bin/false
/etc/modprobe.d/sctp.conf:blacklist sctp
If the command does not return any output, or the line is commented out, and use of SCTP is not documented with the information system security officer (ISSO) as an operational requirement, this is a finding.
STIG ID: ALMA-09-030160 | SRG: SRG-OS-000095-GPOS-00049 | Severity: medium | CCI: | Vulnerability Id: V-269346
Removing support for unneeded filesystem types reduces the local attack surface of the server.
A squashfs compressed filesystem image can be mounted without first decompressing the image.
Note that Snap packages use squashfs.
To configure the system to prevent the squashfs kernel module from being loaded, create a *.conf file in /etc/modprobe.d/ with the following content:
install squashfs /bin/false
blacklist squashfs
Verify that AlmaLinux OS 9 disables the ability to load the squashfs kernel module with the following command:
$ grep squashfs /etc/modprobe.conf /etc/modprobe.d/*
blacklist squashfs
If the command does not return any output, or the line is commented out, and use of squashfs is not documented with the information system security officer (ISSO) as an operational requirement, this is a finding.
STIG ID: ALMA-09-030270 | SRG: SRG-OS-000095-GPOS-00049 | Severity: medium | CCI: | Vulnerability Id: V-269347
It is detrimental for operating systems to provide, or install by default, functionality exceeding requirements or mission objectives. These unnecessary capabilities or services are often overlooked and therefore may remain unsecured. They increase the risk to the platform by providing additional attack vectors.
Failing to disconnect unused protocols can result in a system compromise.
The TIPC is a protocol that is specially designed for intra-cluster communication. It can be configured to transmit messages either on UDP or directly across Ethernet. Message delivery is sequence guaranteed, loss free and flow controlled. Disabling TIPC protects the system against exploitation of any flaws in its implementation.
To configure the system to prevent the TIPC kernel module from being loaded, run the following command:
$ cat << EOF | tee /etc/modprobe.d/tipc.conf
install tipc /bin/false
blacklist tipc
EOF
Verify that AlmaLinux OS 9 disables the ability to load the TIPC kernel module with the following command:
$ grep -r tipc /etc/modprobe.conf /etc/modprobe.d/*
/etc/modprobe.d/tipc.conf:install tipc /bin/false
/etc/modprobe.d/tipc.conf:blacklist tipc
If the command does not return any output, or the line is commented out, and use of TIPC is not documented with the information system security officer (ISSO) as an operational requirement, this is a finding.
STIG ID: ALMA-09-030380 | SRG: SRG-OS-000095-GPOS-00049 | Severity: medium | CCI: | Vulnerability Id: V-269348
Removing support for unneeded filesystem types reduces the local attack surface of the server.
The UDF filesystem is used to write DVDs and so could assist in data exfiltration, the so-called "sneakernet".
Note that Microsoft Azure uses UDF.
To configure the system to prevent the udf kernel module from being loaded, create a *.conf file in /etc/modprobe.d/ with the following content:
install udf /bin/false
blacklist udf
Verify that AlmaLinux OS 9 disables the ability to load the udf kernel module with the following command:
$ grep udf /etc/modprobe.conf /etc/modprobe.d/*
blacklist udf
If the command does not return any output, or the line is commented out, and use of UDF is not documented with the information system security officer (ISSO) as an operational requirement, this is a finding.
STIG ID: ALMA-09-030490 | SRG: SRG-OS-000095-GPOS-00049 | Severity: medium | CCI: | Vulnerability Id: V-269349
It is detrimental for operating systems to provide, or install by default, functionality exceeding requirements or mission objectives. These unnecessary capabilities or services are often overlooked and therefore may remain unsecured. They increase the risk to the platform by providing additional attack vectors.
Failing to disconnect from collaborative computing devices (i.e., cameras) can result in subsequent compromises of organizational information.
Providing easy methods to physically disconnect from such devices after a collaborative computing session helps to ensure participants actually carry out the disconnect activity without having to go through complex and tedious procedures; it also ensures that microphones built into the cameras are also disabled.
To configure the system to prevent the uvcvideo kernel module from being loaded, run the following command:
$ cat << EOF | tee /etc/modprobe.d/uvcvideo.conf
install uvcvideo /bin/false
blacklist uvcvideo
EOF
Verify the operating system disables the ability to load the uvcvideo kernel module:
$ grep -r uvcvideo /etc/modprobe.conf /etc/modprobe.d/*
/etc/modprobe.d/uvcvideo.conf:install uvcvideo /bin/false
/etc/modprobe.d/uvcvideo.conf:blacklist uvcvideo
If the command does not return any output, or either line is commented out, and the collaborative computing device has not been authorized for use, this is a finding.
If a built-in camera is not protected with a cover or is not physically disabled, this is a finding.
For an external camera, if there is not a method for the operator to manually disconnect the camera (e.g., unplug, power off) at the end of collaborative computing sessions, this is a finding.
If the device or operating system does not have a camera installed, this requirement is not applicable.
STIG ID: ALMA-09-030600 | SRG: SRG-OS-000095-GPOS-00049 | Severity: medium | CCI: | Vulnerability Id: V-269350
"nfs-utils" provides a daemon for the kernel Network File System (NFS) server and related tools. This package also contains the "showmount" program. "showmount" queries the mount daemon on a remote host for information about the NFS server on the remote host. For example, "showmount" can display the clients that are mounted on that host.
Remove the nfs-utils package with the following command:
$ dnf remove nfs-utils
Verify that the nfs-utils package is not installed with the following command:
$ dnf list --installed nfs-utils
Error: No matching Packages to list
If the "nfs-utils" package is installed, this is a finding.
STIG ID: ALMA-09-030710 | SRG: SRG-OS-000095-GPOS-00049 | Severity: medium | CCI: | Vulnerability Id: V-269351
The "rsh" package provides a client for several obsolete and insecure network services. Removing it decreases the risk of accidental (or intentional) use of those services.
Remove the rsh package with the following command:
$ dnf remove rsh
Verify that the rsh package is not installed with the following command:
$ dnf list --installed rsh
Error: No matching Packages to list
If the "rsh" package is installed, this is a finding.
STIG ID: ALMA-09-030820 | SRG: SRG-OS-000095-GPOS-00049 | Severity: medium | CCI: | Vulnerability Id: V-269352
The "rsh-server" service provides unencrypted remote access service, which does not provide for the confidentiality and integrity of user passwords or the remote session and has very weak authentication. If a privileged user were to login using this service, the privileged user password could be compromised.
The "rsh-server" package provides several obsolete and insecure network services. Removing it decreases the risk of accidental (or intentional) activation of those services.
Remove the rsh-server package with the following command:
$ dnf remove rsh-server
Verify that the rsh-server package is not installed with the following command:
$ dnf list --installed rsh-server
Error: No matching Packages to list
If the "rsh-server" package is installed, this is a finding.
STIG ID: ALMA-09-030930 | SRG: SRG-OS-000095-GPOS-00049 | Severity: medium | CCI: | Vulnerability Id: V-269353
The tuned package contains a daemon that tunes the system settings dynamically. It does so by monitoring the usage of several system components periodically.
Based on that information, components will then be put into lower or higher power savings modes to adapt to the current usage. The tuned package is not needed for normal OS operations.
Remove the tuned package with the following command:
$ dnf remove tuned
Verify that the tuned package is not installed with the following command:
$ dnf list --installed tuned
Error: No matching Packages to list
If the "tuned" package is installed and is not documented with the information system security officer (ISSO) as an operational requirement, this is a finding.
STIG ID: ALMA-09-031040 | SRG: SRG-OS-000095-GPOS-00049 | Severity: medium | CCI: | Vulnerability Id: V-269354
Unnecessary service packages must not be installed to decrease the attack surface of the system. Graphical display managers have a long history of security vulnerabilities and must not be used, unless approved and documented.
Document the requirement for a graphical user interface with the ISSO or remove all xorg packages with the following command:
Warning: If accessing the system through the graphical user interface, change to the multi-user.target with the following command:
$ systemctl isolate multi-user.target
Warning: Removal of the graphical user interface will immediately render it useless. The following commands must not be run from a virtual terminal emulator in the graphical interface.
$ dnf remove "xorg*"
$ systemctl set-default multi-user.target
Verify that a graphical user interface is not installed with the following command:
$ dnf list --installed "xorg-x11-server-common"
Error: No matching Packages to list
If the "xorg-x11-server-common" package is installed, and the use of a graphical user interface has not been documented with the information system security officer (ISSO) as an operational requirement, this is a finding.
STIG ID: ALMA-09-031150 | SRG: SRG-OS-000095-GPOS-00049 | Severity: medium | CCI: | Vulnerability Id: V-269355
The NIS service provides an unencrypted authentication service, which does not provide for the confidentiality and integrity of user passwords or the remote session.
Removing the "ypserv" package decreases the risk of the accidental (or intentional) activation of NIS or NIS+ services.
Remove the nfs-utils package with the following command:
$ dnf remove ypserv
Verify that the ypserv package is not installed with the following command:
$ dnf list --installed ypserv
Error: No matching Packages to list
If the "ypserv" package is installed, this is a finding.
STIG ID: ALMA-09-031260 | SRG: SRG-OS-000095-GPOS-00049 | Severity: medium | CCI: | Vulnerability Id: V-269356
The avahi package provides the zeroconf capability to discover remote services such as printers and announce itself as a service for sharing files and devices.
Remove the avahi package with the following command:
$ dnf remove avahi
Verify that the avahi package is not installed with the following command:
$ dnf list –installed avahi
Error: No matching Packages to list
If the "avahi" package is installed, this is a finding.
STIG ID: ALMA-09-031370 | SRG: SRG-OS-000095-GPOS-00049 | Severity: medium | CCI: | Vulnerability Id: V-269357
USB mass storage permits easy introduction of unknown devices, thereby facilitating malicious activity.
Satisfies: SRG-OS-000095-GPOS-00049, SRG-OS-000378-GPOS-00163, SRG-OS-000114-GPOS-00059, SRG-OS-000690-GPOS-00140
To configure the system to prevent the usb-storage kernel module from being loaded, run the following command:
$ cat << EOF | tee /etc/modprobe.d/usb-storage.conf
install usb-storage /bin/false
blacklist usb-storage
EOF
Verify that AlmaLinux OS 9 disables the ability to load the USB Storage kernel module with the following command:
$ grep -r usb-storage /etc/modprobe.conf /etc/modprobe.d/*
/etc/modprobe.d/usb-storage.conf:install usb-storage /bin/false
/etc/modprobe.d/usb-storage.conf:blacklist usb-storage
If the command does not return any output, or the line is commented out, and use of usb-storage is not documented with the information system security officer (ISSO) as an operational requirement, this is a finding.
STIG ID: ALMA-09-031700 | SRG: SRG-OS-000096-GPOS-00050 | Severity: medium | CCI: | Vulnerability Id: V-269358
"Firewalld" provides an easy and effective way to block/limit remote access to the system via ports, services, and protocols.
Remote access services, such as those providing remote access to network devices and information systems, which lack automated control capabilities, increase risk and make remote user access management difficult at best.
Remote access is access to DOD nonpublic information systems by an authorized user (or an information system) communicating through an external, nonorganization-controlled network. Remote access methods include, for example, dial-up, broadband, and wireless.
AlmaLinux OS 9 functionality (e.g., SSH) must be capable of taking enforcement action if the audit reveals unauthorized activity. Automated control of remote access sessions allows organizations to ensure ongoing compliance with remote access policies by enforcing connection rules of remote access applications on a variety of information system components (e.g., servers, workstations, notebook computers, smartphones, and tablets).
Satisfies: SRG-OS-000096-GPOS-00050, SRG-OS-000298-GPOS-00116, SRG-OS-000297-GPOS-00115
Install the "firewalld" package using the following command:
$ dnf install firewalld
Verify that the firewalld package is installed with the following command:
$ dnf list --installed firewalld
Installed Packages
firewalld.noarch 1.2.1-1.el9 @anaconda
If the "firewalld" package is not installed, this is a finding.
STIG ID: ALMA-09-031920 | SRG: SRG-OS-000327-GPOS-00127 | Severity: medium | CCI: | Vulnerability Id: V-269359
Without re-authentication, users may access resources or perform tasks for which they do not have authorization.
When operating systems provide the capability to escalate a functional capability, it is critical the user re-authenticate.
Configure AlmaLinux OS 9 to not allow users to execute privileged actions without authenticating.
Remove any occurrence of "!authenticate" found in the "/etc/sudoers" file or files in the "/etc/sudoers.d" directory with the following command:
$ sed -i '/\!authenticate/ s/^/# /g' /etc/sudoers /etc/sudoers.d/*
Verify that "/etc/sudoers" has no occurrences of "!authenticate" with the following command:
$ grep '!authenticate' /etc/sudoers /etc/sudoers.d/*
If any occurrences of "!authenticate" are returned, this is a finding.
STIG ID: ALMA-09-032030 | SRG: SRG-OS-000327-GPOS-00127 | Severity: medium | CCI: | Vulnerability Id: V-269360
Without re-authentication, users may access resources or perform tasks for which they do not have authorization.
When operating systems provide the capability to escalate a functional capability, it is critical the user re-authenticate.
Configure AlmaLinux OS 9 to not allow users to execute privileged actions without authenticating with a password.
Remove any occurrence of "NOPASSWD" found in the "/etc/sudoers" file or files in the "/etc/sudoers.d" directory using the following command:
$ sed -i '/NOPASSWD/ s/^/# /g' /etc/sudoers /etc/sudoers.d/*
Verify that the sudo configuration files have no occurrences of "NOPASSWD" with the following command:
$ grep NOPASSWD /etc/sudoers /etc/sudoers.d/*
If any occurrences of "NOPASSWD" are returned from the command and have not been documented with the information systems security officer (ISSO) as an organizationally defined administrative group using multifactor authentication (MFA), this is a finding.
STIG ID: ALMA-09-032140 | SRG: SRG-OS-000327-GPOS-00127 | Severity: medium | CCI: | Vulnerability Id: V-269361
Without re-authentication, users may access resources or perform tasks for which they do not have authorization.
When operating systems provide the capability to escalate a functional capability, it is critical the user re-authenticate.
Configure the operating system to require users to supply a password for privilege escalation.
Remove any occurrences of " pam_succeed_if " in the "/etc/pam.d/sudo" file.
Verify the operating system is not configured to bypass password requirements for privilege escalation with the following command:
$ grep pam_succeed_if /etc/pam.d/sudo
If any occurrences of "pam_succeed_if" are returned, this is a finding.
STIG ID: ALMA-09-032250 | SRG: SRG-OS-000327-GPOS-00127 | Severity: medium | CCI: | Vulnerability Id: V-269362
Without re-authentication, users may access resources or perform tasks for which they do not have authorization.
When operating systems provide the capability to escalate a functional capability, it is critical the user re-authenticate.
Configure AlmaLinux OS 9 to reauthenticate "sudo" commands after the specified timeout:
Add the following line to "/etc/sudoers" or a file within "/etc/sudoers.d/":
Defaults timestamp_timeout=0
Verify AlmaLinux OS 9 requires reauthentication when using the "sudo" command to elevate privileges with the following command:
$ grep timestamp_timeout /etc/sudoers /etc/sudoers.d/*
/etc/sudoers.d/01_stig:Defaults timestamp_timeout=0
If "timestamp_timeout" is set to a negative number, is commented out, conflicting results or no results are returned, this is a finding.
STIG ID: ALMA-09-032470 | SRG: SRG-OS-000109-GPOS-00056 | Severity: medium | CCI: | Vulnerability Id: V-269363
The "su" program provides a "switch user" capability. It is commonly used to become root but can be used to switch to any user.
Limiting access to such commands is considered a good security practice.
Satisfies: SRG-OS-000109-GPOS-00056, SRG-OS-000312-GPOS-00124, SRG-OS-000312-GPOS-00122, SRG-OS-000312-GPOS-00123
Configure AlmaLinux OS 9 to require users to be in the "wheel" group to run "su" command.
In the "/etc/pam.d/su" file, uncomment the "pam_wheel.so" line as per the instructions in the file:
# Uncomment the following line to require a user to be in the "wheel" group.
#auth required pam_wheel.so use_uid
If necessary, create a "wheel" group and add administrative users to the group.
Verify that AlmaLinux OS 9 requires uses to be members of the "wheel" group with the following command:
$ grep pam_wheel /etc/pam.d/su
auth required pam_wheel.so use_uid
If a line for "pam_wheel.so" does not exist, or is commented out, this is a finding.
STIG ID: ALMA-09-032910 | SRG: SRG-OS-000104-GPOS-00051 | Severity: medium | CCI: | Vulnerability Id: V-269364
To ensure accountability and prevent unauthenticated access, organizational users must be identified and authenticated to prevent potential misuse and compromise of the system.
Organizational users include organizational employees or individuals the organization deems to have equivalent status of employees (e.g., contractors). Organizational users (and processes acting on behalf of users) must be uniquely identified and authenticated to all accesses, except for the following:
1) Accesses explicitly identified and documented by the organization. Organizations document specific user actions that can be performed on the information system without identification or authentication; and
2) Accesses that occur through authorized use of group authenticators without individual authentication. Organizations may require unique identification of individuals in group accounts (e.g., shared privilege accounts) or for detailed accountability of individual activity.
Provide each group that has a duplicate GID with a unique GID using the "groupmod" command, for example:
$ groupmod -g 1002 mygroup
Verify that AlmaLinux OS 9 contains no duplicate GIDs with the following command:
$ cut -f3 -d":" /etc/group | uniq -d
If the system has duplicate GIDs, this is a finding.
STIG ID: ALMA-09-033020 | SRG: SRG-OS-000104-GPOS-00051 | Severity: medium | CCI: | Vulnerability Id: V-269365
To ensure accountability and prevent unauthenticated access, organizational users must be identified and authenticated to prevent potential misuse and compromise of the system.
Organizational users include organizational employees or individuals the organization deems to have equivalent status of employees (e.g., contractors). Organizational users (and processes acting on behalf of users) must be uniquely identified and authenticated to all accesses, except for the following:
1) Accesses explicitly identified and documented by the organization. Organizations document specific user actions that can be performed on the information system without identification or authentication; and
2) Accesses that occur through authorized use of group authenticators without individual authentication. Organizations may require unique identification of individuals in group accounts (e.g., shared privilege accounts) or for detailed accountability of individual activity.
Satisfies: SRG-OS-000104-GPOS-00051, SRG-OS-000121-GPOS-00062
Provide each interactive user that has a duplicate UID with a unique UID using the "usermod" command, for example:
$ usermod -u 1002 myuser
Verify that AlmaLinux OS 9 contains no duplicate UIDs for interactive users with the following command:
$ cut -f3 -d":" /etc/passwd | uniq -d
If output is produced and the UIDs listed are for interactive user accounts, this is a finding.
STIG ID: ALMA-09-033130 | SRG: SRG-OS-000104-GPOS-00051 | Severity: medium | CCI: | Vulnerability Id: V-269366
If a user is assigned the Group Identifier (GID) of a group that does not exist on the system, and a group with the GID is subsequently created, the user may have unintended rights to any files associated with the group.
Configure the system so that all GIDs referenced in "/etc/passwd" are defined in "/etc/group".
Verify that all AlmaLinux OS 9 interactive users have a valid GID with the following command:
$ pwck -r /etc/passwd
If the system has any interactive users with a nonexistent primary group, this is a finding.
STIG ID: ALMA-09-033240 | SRG: SRG-OS-000105-GPOS-00052 | Severity: medium | CCI: | Vulnerability Id: V-269367
Without the use of multifactor authentication, the ease of access to privileged functions is greatly increased.
Multifactor authentication requires using two or more factors to achieve authentication.
Factors include:
1) something a user knows (e.g., password/PIN);
2) something a user has (e.g., cryptographic identification device, token); and
3) something a user is (e.g., biometric).
A privileged account is defined as an information system account with authorizations of a privileged user.
Network access is defined as access to an information system by a user (or a process acting on behalf of a user) communicating through a network (e.g., local area network, wide area network, or the internet).
The DOD CAC with DOD-approved PKI is an example of multifactor authentication.
Configure the SSH daemon to accept public key encryption.
Add the following line to "/etc/ssh/sshd_config", or uncomment the line and set the value to "yes":
PubkeyAuthentication yes
Alternatively, add the setting to an include file if the line "Include /etc/ssh/sshd_config.d/*.conf" is found at the top of the "/etc/ssh/sshd_config" file:
$ cat << EOF | tee /etc/ssh/sshd_config.d/pubkey.conf
PubkeyAuthentication yes
EOF
Restart the SSH daemon for the settings to take effect:
$ systemctl restart sshd.service
Note: If the system administrator (SA) demonstrates the use of an approved alternate multifactor authentication method, this requirement is Not Applicable.
Verify that AlmaLinux OS 9 SSH daemon accepts public key encryption with the following command:
$ sshd -T | grep -i pubkeyauthentication
pubkeyauthentication yes
If "PubkeyAuthentication" is set to no, or the line is missing, this is a finding.
STIG ID: ALMA-09-033350 | SRG: SRG-OS-000375-GPOS-00160 | Severity: medium | CCI: | Vulnerability Id: V-269368
Using an authentication device, such as a CAC or token that is separate from the information system, ensures that even if the information system is compromised, that compromise will not affect credentials stored on the authentication device.
Multifactor solutions that require devices separate from information systems gaining access include, for example, hardware tokens providing time-based or challenge-response authenticators and smart cards such as the U.S. Government Personal Identity Verification card and the DOD Common Access Card.
A privileged account is defined as an information system account with authorizations of a privileged user.
Remote access is access to DOD nonpublic information systems by an authorized user (or an information system) communicating through an external, nonorganization-controlled network. Remote access methods include, for example, dial-up, broadband, and wireless.
This requirement only applies to components where this is specific to the function of the device or has the concept of an organizational user (e.g., VPN, proxy capability). This does not apply to authentication for the purpose of configuring the device itself (management).
This requires further clarification from NIST.
The opensc package can be installed with the following command:
$ dnf install opensc
Verify that AlmaLinux OS 9 has the opensc package installed with the following command:
$ dnf list --installed opensc
Installed Packages
opensc.x86_64 0.22.0-2.el9 @anaconda
If the "opensc" package is not installed, this is a finding.
STIG ID: ALMA-09-033460 | SRG: SRG-OS-000375-GPOS-00160 | Severity: medium | CCI: | Vulnerability Id: V-269369
Using an authentication device, such as a CAC or token that is separate from the information system, ensures that even if the information system is compromised, that compromise will not affect credentials stored on the authentication device.
Multifactor solutions that require devices separate from information systems gaining access include, for example, hardware tokens providing time-based or challenge-response authenticators and smart cards such as the U.S. Government Personal Identity Verification card and the DOD Common Access Card.
A privileged account is defined as an information system account with authorizations of a privileged user.
Remote access is access to DOD nonpublic information systems by an authorized user (or an information system) communicating through an external, nonorganization-controlled network. Remote access methods include, for example, dial-up, broadband, and wireless.
This requirement only applies to components where this is specific to the function of the device or has the concept of an organizational user (e.g., VPN, proxy capability). This does not apply to authentication for the purpose of configuring the device itself (management).
This requires further clarification from NIST.
To enable pcscd run the following command:
$ systemctl enable --now pcscd.socket
$ systemctl enable --now pcscd.service
The pcscd service will be enabled when software tries to access the socket.
Verify that the "pcscd" socket is active with the following command:
$ systemctl status pcscd.socket
pcscd.socket - PC/SC Smart Card Daemon Activation Socket
Loaded: loaded (/usr/lib/systemd/system/pcscd.socket; enabled; preset: enabled)
Active: active (listening) since Thu 2024-04-11 16:03:24 BST; 2 weeks 3 days ago
Triggers: pcscd.service
Listen: /run/pcscd/pcscd.comm (Stream)
CGroup: /system.slice/pcscd.socket
If the pcscd.socket is not active, this is a finding.
STIG ID: ALMA-09-033570 | SRG: SRG-OS-000375-GPOS-00160 | Severity: medium | CCI: | Vulnerability Id: V-269370
Using an authentication device, such as a CAC or token that is separate from the information system, ensures that even if the information system is compromised, that compromise will not affect credentials stored on the authentication device.
Multifactor solutions that require devices separate from information systems gaining access include, for example, hardware tokens providing time-based or challenge-response authenticators and smart cards such as the U.S. Government Personal Identity Verification card and the DOD Common Access Card.
A privileged account is defined as an information system account with authorizations of a privileged user.
Remote access is access to DOD nonpublic information systems by an authorized user (or an information system) communicating through an external, nonorganization-controlled network. Remote access methods include, for example, dial-up, broadband, and wireless.
This requirement only applies to components where this is specific to the function of the device or has the concept of an organizational user (e.g., VPN, proxy capability). This does not apply to authentication for the purpose of configuring the device itself (management).
This requires further clarification from NIST.
The pcsc-lite package can be installed with the following command:
$ dnf install pcsc-lite
Note: If the System Administrator demonstrates the use of an approved alternate multifactor authentication method, this requirement is Not Applicable.
Verify that AlmaLinux OS 9 has the pcsc-lite package installed with the following command:
$ dnf list --installed pcsc-lite
Installed Packages
pcsc-lite.x86_64 1.9.4-1.el9 @anaconda
If the "pcsc-lite" package is not installed, this is a finding.
STIG ID: ALMA-09-033680 | SRG: SRG-OS-000375-GPOS-00160 | Severity: medium | CCI: | Vulnerability Id: V-269371
Using an authentication device, such as a DOD Common Access Card (CAC) or token that is separate from the information system, ensures that even if the information system is compromised, credentials stored on the authentication device will not be affected.
Multifactor solutions that require devices separate from information systems gaining access include, for example, hardware tokens providing time-based or challenge-response authenticators and smart cards such as the U.S. Government Personal Identity Verification (PIV) card and the DOD CAC.
AlmaLinux OS 9 includes multiple options for configuring certificate status checking, but for this requirement focuses on the System Security Services Daemon (SSSD). By default, SSSD performs Online Certificate Status Protocol (OCSP) checking and certificate verification using a sha256 digest function.
Edit the file "/etc/sssd/sssd.conf" or a "*.conf" file within the "/etc/sssd/conf.d/" directory and add or edit the following line within the [sssd] section:
certificate_verification = ocsp_dgst=sha512
Note: If the system administrator (SA) demonstrates the use of an approved alternate multifactor authentication method, this requirement is Not Applicable.
Verify the operating system implements Online Certificate Status Protocol (OCSP) and is using the proper digest value on the system with the following command:
$ grep certificate_verification /etc/sssd/sssd.conf /etc/sssd/conf.d/*.conf
/etc/sssd/conf.d/certificate_verification.conf:certificate_verification = ocsp_dgst=sha512
If the certificate_verification line is missing from the [sssd] section, or is missing "ocsp_dgst=sha512", ask the administrator to indicate what type of multifactor authentication is being used and how the system implements certificate status checking. If there is no evidence of certificate status checking being used, this is a finding.
STIG ID: ALMA-09-033790 | SRG: SRG-OS-000375-GPOS-00160 | Severity: medium | CCI: | Vulnerability Id: V-269372
Using an authentication device, such as a CAC or token that is separate from the information system, ensures that even if the information system is compromised, that compromise will not affect credentials stored on the authentication device.
Multifactor solutions that require devices separate from information systems gaining access include, for example, hardware tokens providing time-based or challenge-response authenticators and smart cards such as the U.S. Government Personal Identity Verification card and the DOD Common Access Card.
A privileged account is defined as an information system account with authorizations of a privileged user.
Remote access is access to DOD nonpublic information systems by an authorized user (or an information system) communicating through an external, nonorganization-controlled network. Remote access methods include, for example, dial-up, broadband, and wireless.
This requirement only applies to components where this is specific to the function of the device or has the concept of an organizational user (e.g., VPN, proxy capability). This does not apply to authentication for the purpose of configuring the device itself (management).
This requires further clarification from NIST.
Satisfies: SRG-OS-000375-GPOS-00160, SRG-OS-000105-GPOS-00052, SRG-OS-000705-GPOS-00150
Edit the file "/etc/sssd/sssd.conf" or a "*.conf" file within the "/etc/sssd/conf.d/" directory and add or edit the following line within the [pam] section:
pam_cert_auth = True
Note: If the System Administrator demonstrates the use of an approved alternate multifactor authentication method, this requirement is Not Applicable.
Verify that AlmaLinux OS 9 has smart cards are enabled in System Security Services Daemon (SSSD), run the following command:
$ grep pam_cert_auth /etc/sssd/sssd.conf /etc/sssd/conf.d/*.conf
/etc/sssd/conf.d/certificate_verification.conf:pam_cert_auth = True
If "pam_cert_auth" is not set to "True", the line is commented out, or the line is missing, this is a finding.
STIG ID: ALMA-09-034010 | SRG: SRG-OS-000377-GPOS-00162 | Severity: medium | CCI: | Vulnerability Id: V-269373
The use of PIV credentials facilitates standardization and reduces the risk of unauthorized access.
DOD has mandated the use of the CAC to support identity management and personal authentication for systems covered under Homeland Security Presidential Directive (HSPD) 12, as well as making the CAC a primary component of layered protection for national security systems.
Satisfies: SRG-OS-000377-GPOS-00162, SRG-OS-000376-GPOS-00161, SRG-OS-000375-GPOS-00160, SRG-OS-000105-GPOS-00052
The openssl-pkcs11 package can be installed with the following command:
$ dnf install openssl-pkcs11
Note: If the System Administrator demonstrates the use of an approved alternate multifactor authentication method, this requirement is Not Applicable.
Verify that AlmaLinux OS 9 has the openssl-pkcs11 package installed with the following command:
$ dnf list --installed openssl-pkcs11
Installed Packages
openssl-pkcs11.x86_64 0.4.11-7.el9 @baseos
If the "openssl-pkcs11" package is not installed, this is a finding.
STIG ID: ALMA-09-034120 | SRG: SRG-OS-000106-GPOS-00053 | Severity: medium | CCI: | Vulnerability Id: V-269374
If an account has an empty password, anyone could log on and run commands with the privileges of that account.
Accounts with empty passwords should never be used in operational environments.
Satisfies: SRG-OS-000106-GPOS-00053, SRG-OS-000108-GPOS-00055
Configure the SSH daemon to prevent users logging in with blank passwords.
Add the following line to "/etc/ssh/sshd_config", or uncomment the line and set the value to "yes":
PermitEmptyPasswords no
Alternatively, add the setting to an include file if the line "Include /etc/ssh/sshd_config.d/*.conf" is found at the top of the "/etc/ssh/sshd_config" file:
$ cat << EOF | tee /etc/ssh/sshd_config.d/emptypasswords.conf
PermitEmptyPasswords no
EOF
Restart the SSH daemon for the settings to take effect:
$ systemctl restart sshd.service
Verify AlmaLinux OS 9 remote access using SSH prevents logging on with a blank password with the following command:
$ sshd -T | grep -i permitemptypasswords
permitemptypasswords no
If "PermitEmptyPasswords" is set to "yes", or the line is missing, this is a finding.
STIG ID: ALMA-09-034340 | SRG: SRG-OS-000107-GPOS-00054 | Severity: medium | CCI: | Vulnerability Id: V-269375
Smart card login provides two-factor authentication stronger than that provided by a username and password combination.
Smart cards leverage public key infrastructure to provide and verify credentials.
Configuring the smart card driver in use by the organization helps to prevent users from using unauthorized smart cards.
Satisfies: SRG-OS-000107-GPOS-00054, SRG-OS-000108-GPOS-00055, SRG-OS-000112-GPOS-00057, SRG-OS-000113-GPOS-00058
Configure AlmaLinux OS 9 to load the CAC driver.
Add or modify the following line in the "/etc/opensc.conf" file:
card_drivers = cac;
Verify that AlmaLinux OS 9 loads the CAC driver with the following command:
$ grep card_drivers /etc/opensc.conf
card_drivers = cac;
If "cac" is not listed as a card driver, or there is no line returned for "card_drivers", this is a finding.
STIG ID: ALMA-09-034780 | SRG: SRG-OS-000109-GPOS-00056 | Severity: medium | CCI: | Vulnerability Id: V-269376
Even though the communications channel may be encrypted, an additional layer of security is gained by extending the policy of not logging directly on as root.
In addition, logging in with a user-specific account provides individual accountability of actions performed on the system.
The root account is a known default username, so should not allow direct login as half of the username/password combination is known, making it vulnerable to brute-force password guessing attacks.
To configure the system to prevent users from logging on directly as root over SSH, add or modify the following line in "/etc/ssh/sshd_config":
PermitRootLogin no
Alternatively, add the setting to an include file if the line "Include /etc/ssh/sshd_config.d/*.conf" is found at the top of the "/etc/ssh/sshd_config" file:
$ echo "PermitRootLogin no" > /etc/ssh/sshd_config.d/root.conf
Restart the SSH daemon for the settings to take effect:
$ systemctl restart sshd.service
Verify AlmaLinux OS 9 prevents users from logging on directly as "root" over SSH with the following command:
$ sshd -T |grep -I permitrootlogin
permitrootlogin no
If the "PermitRootLogin" keyword is set to "yes" or "without-password", this is a finding.
STIG ID: ALMA-09-034890 | SRG: SRG-OS-000378-GPOS-00163 | Severity: medium | CCI: | Vulnerability Id: V-269377
Automatically mounting file systems permits easy introduction of unknown devices, thereby facilitating malicious activity.
Satisfies: SRG-OS-000378-GPOS-00163, SRG-OS-000114-GPOS-00059
Configure the GNOME desktop to disable automated mounting of removable media.
The dconf settings can be edited in the /etc/dconf/db/* location.
Update the [org/gnome/desktop/media-handling] section of the "/etc/dconf/db/local.d/00-security-settings" database file and add or update the following lines:
[org/gnome/desktop/media-handling]
automount-open=false
Then update the dconf system databases:
$ dconf update
Note: This requirement assumes the use of the AlmaLinux OS 9 default graphical user interface, the GNOME desktop environment. If the system does not have any graphical user interface installed, this requirement is Not Applicable.
Verify AlmaLinux OS 9 disables the graphical user interface automount function with the following command:
$ gsettings get org.gnome.desktop.media-handling automount-open
false
If "automount-open" is set to "true", and is not documented with the information system security officer (ISSO) as an operational requirement, this is a finding.
STIG ID: ALMA-09-035000 | SRG: SRG-OS-000378-GPOS-00163 | Severity: medium | CCI: | Vulnerability Id: V-269378
Automatically mounting file systems permits easy introduction of unknown devices, thereby facilitating malicious activity.
Satisfies: SRG-OS-000378-GPOS-00163, SRG-OS-000114-GPOS-00059
Configure the GNOME desktop to not allow a user to change the setting that disables automated mounting of removable media.
Add the following line to "/etc/dconf/db/local.d/locks/00-security-settings-lock" to prevent user modification:
/org/gnome/desktop/media-handling/automount-open
Then update the dconf system databases:
$ dconf update
Note: This requirement assumes the use of the AlmaLinux OS 9 default graphical user interface, the GNOME desktop environment. If the system does not have any graphical user interface installed, this requirement is Not Applicable.
Verify AlmaLinux OS 9 disables ability of the user to override the graphical user interface automount setting.
Determine which profile the system database is using with the following command:
$ grep system-db /etc/dconf/profile/user
system-db:local
Check that the automount setting is locked from nonprivileged user modification with the following command:
Note: The example below is using the database "local" for the system, so the path is "/etc/dconf/db/local.d". This path must be modified if a database other than "local" is being used.
$ grep 'automount-open' /etc/dconf/db/local.d/locks/*
/org/gnome/desktop/media-handling/automount-open
If the command does not return at least the example result, this is a finding.
STIG ID: ALMA-09-035110 | SRG: SRG-OS-000378-GPOS-00163 | Severity: medium | CCI: | Vulnerability Id: V-269379
Automatically mounting filesystems and running applications upon insertion of a device facilitates malicious activity.
Satisfies: SRG-OS-000378-GPOS-00163, SRG-OS-000114-GPOS-00059
Configure the GNOME desktop to not allow a user to change the setting that disables autorun on removable media.
Add the following line to "/etc/dconf/db/local.d/locks/00-security-settings-lock" to prevent user modification:
/org/gnome/desktop/media-handling/autorun-never
Then update the dconf system databases:
$ dconf update
Note: This requirement assumes the use of the AlmaLinux OS 9 default graphical user interface, the GNOME desktop environment. If the system does not have any graphical user interface installed, this requirement is Not Applicable.
Verify AlmaLinux OS 9 disables ability of the user to override the graphical user interface autorun setting.
Determine which profile the system database is using with the following command:
$ grep system-db /etc/dconf/profile/user
system-db:local
Check that the automount setting is locked from nonprivileged user modification with the following command:
Note: The example below is using the database "local" for the system, so the path is "/etc/dconf/db/local.d". This path must be modified if a database other than "local" is being used.
$ grep 'autorun-never' /etc/dconf/db/local.d/locks/*
/org/gnome/desktop/media-handling/autorun-never
If the command does not return at least the example result, this is a finding.
STIG ID: ALMA-09-035210 | SRG: SRG-OS-000378-GPOS-00163 | Severity: medium | CCI: | Vulnerability Id: V-269380
The USBGuard-daemon is the main component of the USBGuard software framework. It runs as a service in the background and enforces the USB device authorization policy for all USB devices. The policy is defined by a set of rules using a rule language described in the usbguard-rules.conf file. The policy and the authorization state of USB devices can be modified during runtime using the USBGuard tool.
The system administrator (SA) must work with the site information system security officer (ISSO) to determine a list of authorized peripherals and establish rules within the USBGuard software framework to allow only authorized devices.
Install the usbguard package with the following command:
$ dnf install usbguard
Note: If the system is virtual machine with no virtual or physical USB peripherals attached, this is not a finding.
Verify USBGuard is installed on the operating system with the following command:
$ dnf list installed usbguard
Installed Packages
usbguard.x86_64 1.0.0-15.el9 @AppStream
If the USBGuard package is not installed, ask the SA to indicate how unauthorized peripherals are being blocked.
If there is no evidence that unauthorized peripherals are being blocked before establishing a connection, this is a finding.
STIG ID: ALMA-09-035220 | SRG: SRG-OS-000378-GPOS-00163 | Severity: medium | CCI: | Vulnerability Id: V-269381
The USBGuard-daemon is the main component of the USBGuard software framework. It runs as a service in the background and enforces the USB device authorization policy for all USB devices. The policy is defined by a set of rules using a rule language described in the usbguard-rules.conf file. The policy and the authorization state of USB devices can be modified during runtime using the USBGuard tool.
The system administrator (SA) must work with the site information system security officer (ISSO) to determine a list of authorized peripherals and establish rules within the USBGuard software framework to allow only authorized devices.
To enable the USBGuard service run the following command:
$ systemctl enable --now usbguard
Note: If the system is virtual machine with no virtual or physical USB peripherals attached, this is not a finding.
Verify AlmaLinux OS 9 has USBGuard enabled with the following command:
$ systemctl status usbguard
usbguard.service - USBGuard daemon
Loaded: loaded (/usr/lib/systemd/system/usbguard.service; enabled; preset: disabled)
Active: active (running) since Thu 2024-02-08 09:42:05 UTC; 1h 24min ago
If USBGuard is not active, ask the SA to indicate how unauthorized peripherals are being blocked.
If there is no evidence that unauthorized peripherals are being blocked before establishing a connection, this is a finding.
STIG ID: ALMA-09-035440 | SRG: SRG-OS-000378-GPOS-00163 | Severity: medium | CCI: | Vulnerability Id: V-269382
The USBGuard-daemon is the main component of the USBGuard software framework. It runs as a service in the background and enforces the USB device authorization policy for all USB devices. The policy is defined by a set of rules using a rule language described in the usbguard-rules.conf file. The policy and the authorization state of USB devices can be modified during runtime using the USBGuard tool.
The system administrator (SA) must work with the site information system security officer (ISSO) to determine a list of authorized peripherals and establish rules within the USBGuard software framework to allow only authorized devices.
Configure the operating system to enable the blocking of unauthorized peripherals with the following command:
Note: This command will create an allow list for any USB devices currently connect to the system.
$ usbguard generate-policy --no-hashes | tee /etc/usbguard/rules.conf
Note: Enabling and starting USBGuard without properly configuring it for an individual system will immediately prevent any access over a USB device such as a keyboard or mouse.
Note: If the system is virtual machine with no virtual or physical USB peripherals attached, this is not a finding.
Verify the USBGuard has a policy configured with the following command:
$ usbguard list-rules
1: allow id 1d6b:0002 serial "0000:03:00.0" name "xHCI Host Controller" with-interface 09:00:00 with-connect-type ""
2: allow id 1d6b:0003 serial "0000:03:00.0" name "xHCI Host Controller" with-interface 09:00:00 with-connect-type ""
3: allow id 0627:0001 serial "28754-0000:00:02.2:00.0-1" name "QEMU USB Tablet" with-interface 03:00:00 with-connect-type "unknown"
If the command does not return results or an error is returned, ask the SA to indicate how unauthorized peripherals are being blocked.
If there is no evidence that unauthorized peripherals are being blocked before establishing a connection, this is a finding.
STIG ID: ALMA-09-035550 | SRG: SRG-OS-000379-GPOS-00164 | Severity: medium | CCI: | Vulnerability Id: V-269383
Without authenticating devices, unidentified or unknown devices may be introduced, thereby facilitating malicious activity. Bidirectional authentication provides stronger safeguards to validate the identity of other devices for connections that are of greater risk.
Bidirectional authentication solutions include, but are not limited to, IEEE 802.1x and Extensible Authentication Protocol (EAP), RADIUS server with EAP-Transport Layer Security (TLS) authentication, Kerberos, and SSL mutual authentication.
A local connection is any connection with a device communicating without the use of a network. A network connection is any connection with a device that communicates through a network (e.g., local area network, wide area network, or the internet). A remote connection is any connection with a device communicating through an external network (e.g., the internet).
Because of the challenges of applying this requirement on a large scale, organizations are encouraged to only apply this requirement to those limited number (and type) of devices that truly need to support this capability.
Satisfies: SRG-OS-000379-GPOS-00164, SRG-OS-000114-GPOS-00059
Remove the autofs package with the following command:
$ dnf remove autofs
Note: If the autofs service is not installed, this requirement is Not Applicable.
Verify that the autofs package is not installed with the following command:
$ dnf list --installed autofs
Error: No matching Packages to list
If the "autofs" package is installed, and is not documented as an operational requirement with the information system security officer (ISSO), this is a finding.
STIG ID: ALMA-09-035660 | SRG: SRG-OS-000118-GPOS-00060 | Severity: medium | CCI: | Vulnerability Id: V-269384
Inactive identifiers pose a risk to systems and applications because attackers may exploit an inactive identifier and potentially obtain undetected access to the system.
Automatically disabling inactive accounts ensures that accounts which may not have been responsibly removed are not available to threat actors who may have compromised their credentials.
Owners of inactive accounts will not notice if unauthorized access to their user account has been obtained.
Configure AlmaLinux OS 9 to disable account identifiers after 35 days of inactivity after the password expiration.
Run the following command to change the configuration for useradd:
$ useradd -D -f 35
The recommendation is 35 days, but a lower value is acceptable.
Verify that AlmaLinux OS 9 account identifiers (individuals, groups, roles, and devices) are disabled after 35 days of inactivity with the following command:
$ useradd -D | grep INACTIVE
INACTIVE=35
If the value of "INACTIVE" is set to "-1", a value greater than "35", or is missing, this is a finding.
STIG ID: ALMA-09-035770 | SRG: SRG-OS-000070-GPOS-00038 | Severity: medium | CCI: | Vulnerability Id: V-269385
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.
Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possible combinations that need to be tested before the password is compromised.
Configure AlmaLinux OS 9 to enforce password complexity by requiring at least one lowercase character be used by setting the "lcredit" option.
Add or update the following line in the "/etc/security/pwquality.conf" file or a configuration file in the "/etc/security/pwquality.conf.d/" directory:
lcredit = -1
Remove any configurations that conflict with the above value.
Verify that AlmaLinux OS 9 enforces password complexity by requiring at least one lowercase character with the following command:
$ grep -r lcredit /etc/security/pwquality.conf*
/etc/security/pwquality.conf.d/stig.conf:lcredit = -1
If the value of "lcredit" is a positive number, is not set, is commented out, or if conflicting results are returned, this is a finding.
STIG ID: ALMA-09-035880 | SRG: SRG-OS-000069-GPOS-00037 | Severity: medium | CCI: | Vulnerability Id: V-269386
Enabling PAM password complexity permits enforcement of strong passwords and consequently makes the system less prone to dictionary attacks.
Configure AlmaLinux OS 9 to use "pwquality" to enforce password complexity rules.
Add the following line to the "/etc/pam.d/system-auth" and "/etc/pam.d/password-auth" files (or modify the line to have the required value):
password required pam_pwquality.so retry=3
Verify AlmaLinux OS 9 uses "pwquality" to enforce the password complexity rules in the password-auth file with the following command:
Check for the use of the "pwquality" module in the PAM auth files with the following command:
$ grep pam_pwquality.so /etc/pam.d/system-auth /etc/pam.d/password-auth
/etc/pam.d/system-auth:password required pam_pwquality.so retry=3
/etc/pam.d/password-auth:password required pam_pwquality.so retry=3
If the command does not return a line in each file containing the value "pam_pwquality.so", or the line is commented out, this is a finding.
If the system administrator (SA) can demonstrate that the required configuration is contained in a PAM configuration file included or substacked from the system-auth file, this is not a finding.
STIG ID: ALMA-09-035990 | SRG: SRG-OS-000069-GPOS-00037 | Severity: medium | CCI: | Vulnerability Id: V-269387
AlmaLinux OS 9 uses "pwquality" as a mechanism to enforce password complexity. This is set in both:
/etc/pam.d/password-auth
/etc/pam.d/system-auth
By limiting the number of attempts to meet the pwquality module complexity requirements before returning with an error, the system will audit abnormal attempts at password changes.
Configure AlmaLinux OS 9 to limit the "pwquality" retry option to "3".
Add the following line to the "/etc/pam.d/system-auth" and "/etc/pam.d/password-auth" files (or modify the line to have the required value):
password required pam_pwquality.so retry=3
Verify AlmaLinux OS 9 is configured to limit the "pwquality" retry option to "3".
Check for the use of the "pwquality" retry option in the PAM auth files with the following command:
$ grep pam_pwquality.so /etc/pam.d/system-auth /etc/pam.d/password-auth
/etc/pam.d/system-auth:password required pam_pwquality.so retry=3
/etc/pam.d/password-auth:password required pam_pwquality.so retry=3
If the value of "retry" is set to "0" or greater than "3", or is missing from either, this is a finding.
If the system administrator (SA) can demonstrate that the required configuration is contained in a PAM configuration file included or substacked from the system-auth file, this is not a finding.
STIG ID: ALMA-09-036100 | SRG: SRG-OS-000069-GPOS-00037 | Severity: medium | CCI: | Vulnerability Id: V-269388
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.
Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possible combinations that need to be tested before the password is compromised.
Configure AlmaLinux OS 9 to enforce password complexity on the root account.
Add or update the following line in /etc/security/pwquality.conf:
enforce_for_root
Note: Unlike most Linux tools, pam_pwquality does not override its defaults with those in a drop-in file, so edit /etc/security/pwquality.conf and not use a file in /etc/security/pwquality.conf.d/ or comment out the setting in /etc/security/pwquality.conf if using a drop-in file.
Verify that AlmaLinux OS 9 enforces password complexity rules for the root account.
Check if root user is required to use complex passwords with the following command:
$ grep enforce_for_root /etc/security/pwquality.conf /etc/security/pwquality.conf.d/*.conf
/etc/security/pwquality.conf:# enforce_for_root
/etc/security/pwquality.conf.d/stig.conf:enforce_for_root
If "enforce_for_root" is commented or missing, this is a finding.
STIG ID: ALMA-09-036210 | SRG: SRG-OS-000069-GPOS-00037 | Severity: medium | CCI: | Vulnerability Id: V-269389
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.
Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possible combinations that need to be tested before the password is compromised.
Configure AlmaLinux OS 9 to enforce password complexity by requiring at least one uppercase character be used by setting the "ucredit" option.
Add or update the following line in the "/etc/security/pwquality.conf" file or a configuration file in the "/etc/security/pwquality.conf.d/" directory:
ucredit = -1
Remove any configurations that conflict with the above value.
Verify that AlmaLinux OS 9 enforces password complexity by requiring at least one uppercase character with the following command:
$ grep -r ucredit /etc/security/pwquality.conf*
/etc/security/pwquality.conf.d/stig.conf:ucredit = -1
If the value of "ucredit" is a positive number, is not set, is commented out, or if conflicting results are returned, this is a finding.
STIG ID: ALMA-09-036320 | SRG: SRG-OS-000266-GPOS-00101 | Severity: medium | CCI: | Vulnerability Id: V-269390
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.
Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possible combinations that need to be tested before the password is compromised.
Configure AlmaLinux OS 9 to enforce password complexity by requiring at least one special character be used by setting the "ocredit" option.
Add or update the following line in the "/etc/security/pwquality.conf" file or a configuration file in the "/etc/security/pwquality.conf.d/" directory:
ocredit = -1
Remove any configurations that conflict with the above value.
Verify that AlmaLinux OS 9 enforces password complexity by requiring at least one special character with the following command:
$ grep -E ocredit /etc/security/pwquality.conf*
/etc/security/pwquality.conf.d/stig.conf:ocredit = -1
If the value of "ocredit" is a positive number, is not set, is commented out, or if conflicting results are returned, this is a finding.
STIG ID: ALMA-09-036430 | SRG: SRG-OS-000078-GPOS-00046 | Severity: medium | CCI: | Vulnerability Id: V-269391
The shorter the password, the lower the number of possible combinations that need to be tested before the password is compromised.
Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks. Password length is one factor of several that helps to determine strength and how long it takes to crack a password. Use of more characters in a password helps to exponentially increase the time and/or resources required to compromise the password.
The shorter the password, the lower the number of possible combinations that need to be tested before the password is compromised.
Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks. Password length is one factor of several that helps to determine strength and how long it takes to crack a password. Use of more characters in a password helps to exponentially increase the time and/or resources required to compromise the password.
Configure AlmaLinux OS 9 to enforce a minimum 15-character password length for new user accounts.
Modify the "/etc/login.defs" file to set the "PASS_MIN_LEN" parameter to 15 or greater:
PASS_MIN_LEN 15
Verify that AlmaLinux OS 9 enforces a minimum 15-character password length for new user accounts by running the following command:
$ grep PASS_MIN_LEN /etc/login.defs
PASS_MIN_LEN 15
If the "PASS_MIN_LEN" parameter value is less than "15", is not set, or is commented out, this is a finding.
STIG ID: ALMA-09-036540 | SRG: SRG-OS-000078-GPOS-00046 | Severity: medium | CCI: | Vulnerability Id: V-269392
The shorter the password, the lower the number of possible combinations that need to be tested before the password is compromised.
Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks. Password length is one factor of several that helps to determine strength and how long it takes to crack a password. Use of more characters in a password helps to exponentially increase the time and/or resources required to compromise the password.
The shorter the password, the lower the number of possible combinations that need to be tested before the password is compromised.
Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks. Password length is one factor of several that helps to determine strength and how long it takes to crack a password. Use of more characters in a password helps to exponentially increase the time and/or resources required to compromise the password.
AlmaLinux OS 9 uses the PAM pwquality module as a mechanism to enforce password complexity. Configurations are set in the "/etc/security/pwquality.conf" file or further *.conf files within the "/etc/security/pwquality.conf.d/" directory.
The "minlen" parameter acts as a score of complexity based on the credit components of the pwquality module. By setting the credit to a negative value, not only will those components be required, but they will not count toward the total score of minlen. This will result in minlen requiring a 15-character minimum.
Configure AlmaLinux OS 9 to require a minimum 15-character password length by setting the "minlen" option.
Add or update the following line in the "/etc/security/pwquality.conf" file or a configuration file in the "/etc/security/pwquality.conf.d/" directory:
minlen = 15
Remove any configurations that conflict with the above value.
Verify that AlmaLinux OS 9 enforces a minimum 15-character password length with the following command:
$ grep -r minlen /etc/security/pwquality.conf*
/etc/security/pwquality.conf.d/stig.conf:minlen = 15
If the value of "minlen" is less than 15, is not set, is commented out, or if conflicting results are returned, this is a finding.
STIG ID: ALMA-09-036650 | SRG: SRG-OS-000071-GPOS-00039 | Severity: medium | CCI: | Vulnerability Id: V-269393
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.
Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possible combinations that need to be tested before the password is compromised.
Configure AlmaLinux OS 9 to enforce password complexity by requiring at least one numeric character be used by setting the "dcredit" option.
Add or update the following line in the "/etc/security/pwquality.conf" file or a configuration file in the "/etc/security/pwquality.conf.d/" directory:
dcredit = -1
Remove any configurations that conflict with the above value.
Verify that AlmaLinux OS 9 enforces password complexity by requiring at least one numeric character with the following command:
$ grep -r dcredit /etc/security/pwquality.conf*
/etc/security/pwquality.conf.d/stig.conf:dcredit = -1
If the value of "dcredit" is a positive number, is not set, is commented out, or if conflicting results are returned, this is a finding.
STIG ID: ALMA-09-036760 | SRG: SRG-OS-000072-GPOS-00040 | Severity: medium | CCI: | Vulnerability Id: V-269394
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.
Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possible combinations that need to be tested before the password is compromised.
Configure AlmaLinux OS 9 to require the change of at least four character classes when passwords are changed by setting the "minclass" option.
Add the following line to "/etc/security/pwquality.conf" (or modify the line to have the required value):
minclass = 4
Verify the value of the "minclass" option in "/etc/security/pwquality.conf" with the following command:
$ grep -ir minclass /etc/security/pwquality.conf*
/etc/security/pwquality.conf:# minclass = 0
/etc/security/pwquality.conf.d/stig.conf:minclass = 4
If the value of "minclass" is set to less than "4", or is commented out, this is a finding.
STIG ID: ALMA-09-036870 | SRG: SRG-OS-000072-GPOS-00040 | Severity: medium | CCI: | Vulnerability Id: V-269395
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.
Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possible combinations that need to be tested before the password is compromised.
Configure AlmaLinux OS 9 to require the change of the number of repeating consecutive characters when passwords are changed by setting the "maxrepeat" option.
Add the following line to "/etc/security/pwquality.conf" (or modify the line to have the required value):
maxrepeat = 3
Verify the value of the "maxrepeat" option in "/etc/security/pwquality.conf" with the following command:
$ grep -ir maxrepeat /etc/security/pwquality.conf*
/etc/security/pwquality.conf:# maxrepeat = 0
/etc/security/pwquality.conf.d/stig.conf:maxrepeat = 3
If the value of "maxrepeat" is set to more than "3", or is commented out, this is a finding.
STIG ID: ALMA-09-036980 | SRG: SRG-OS-000072-GPOS-00040 | Severity: medium | CCI: | Vulnerability Id: V-269396
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.
Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possible combinations that need to be tested before the password is compromised.
Configure AlmaLinux OS 9 to require the change of the number of repeating characters of the same character class when passwords are changed by setting the "maxclassrepeat" option.
Add the following line to "/etc/security/pwquality.conf" conf (or modify the line to have the required value):
maxclassrepeat = 4
Verify the value of the "maxclassrepeat" option in "/etc/security/pwquality.conf" with the following command:
$ grep -ir maxclassrepeat /etc/security/pwquality.conf*
/etc/security/pwquality.conf:# maxclassrepeat = 0
/etc/security/pwquality.conf.d/stig.conf:maxclassrepeat = 4
If the value of "maxclassrepeat" is set to "0", more than "4", or is commented out, this is a finding.
STIG ID: ALMA-09-037090 | SRG: SRG-OS-000072-GPOS-00040 | Severity: medium | CCI: | Vulnerability Id: V-269397
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.
Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possible combinations that need to be tested before the password is compromised.
Configure AlmaLinux OS 9 to require the change of at least eight of the total number of characters when passwords are changed by setting the "difok" option.
Add or update the following line in the "/etc/security/pwquality.conf" file or a configuration file in the "/etc/security/pwquality.conf.d/" directory:
difok = 8
Remove any configurations that conflict with the above value.
Verify that AlmaLinux OS 9 enforces password complexity by requiring at least eight characters differ when passwords are changed with the following command:
$ grep -r difok /etc/security/pwquality.conf*
/etc/security/pwquality.conf.d/stig.conf:difok = 8
If the value of "difok" is less than "8", is not set, is commented out, or if conflicting results are returned, this is a finding.
STIG ID: ALMA-09-037200 | SRG: SRG-OS-000073-GPOS-00041 | Severity: high | CCI: | Vulnerability Id: V-269398
Passwords must be protected at all times, and encryption is the standard method for protecting passwords. If passwords are not encrypted, they can be plainly read (i.e., clear text) and easily compromised.
Using more hashing rounds makes password cracking attacks more difficult.
Configure AlmaLinux OS 9 to use at least 100000 hashing rounds for hashing passwords.
Add or modify the following line in "/etc/pam.d/password-auth" and "/etc/pam.d/system-auth" and set "rounds" to "100000" or higher:
password sufficient pam_unix.so sha512 rounds=100000
Verify the number of rounds for the password hashing algorithm is configured with the following command:
$ grep rounds /etc/pam.d/password-auth /etc/pam.d/system-auth
/etc/pam.d/password-auth:password sufficient pam_unix.so sha512 shadow rounds=100000 use_authtok
/etc/pam.d/system-auth:password sufficient pam_unix.so sha512 shadow rounds=100000 use_authtok
If a matching line is not returned in both files, or "rounds" is less than "100000", this a finding.
Add/modify the appropriate sections of the "/etc/pam.d/password-auth" file to match the following lines, ensuring that the "preauth" line is listed before pam_unix.so
STIG ID: ALMA-09-037310 | SRG: SRG-OS-000073-GPOS-00041 | Severity: high | CCI: | Vulnerability Id: V-269399
Passwords must be protected at all times, and encryption is the standard method for protecting passwords. If passwords are not encrypted, they can be plainly read (i.e., clear text) and easily compromised.
The system must use a strong hashing algorithm to store the password.
Configure AlmaLinux OS 9 to use the SHA-512 algorithm for password hashing.
Add or change the following line in the "[defaults]" section of the "/etc/libuser.conf" file:
crypt_style = sha512
Verify the user and group account administration utilities are configured to store only encrypted representations of passwords with the following command:
$ grep crypt_style /etc/libuser.conf
crypt_style = sha512
If the "crypt_style" variable is not set to "sha512", is not in the defaults section, is commented out, or does not exist, this is a finding.
STIG ID: ALMA-09-037420 | SRG: SRG-OS-000073-GPOS-00041 | Severity: high | CCI: | Vulnerability Id: V-269400
Passwords must be protected at all times, and encryption is the standard method for protecting passwords. If passwords are not encrypted, they can be plainly read (i.e., clear text) and easily compromised.
The system must use a strong hashing algorithm to store the password.
Configure AlmaLinux OS 9 to use the SHA-512 algorithm for password hashing.
Add or update the following line in the "/etc/login.defs" file:
ENCRYPT_METHOD SHA512
Verify the system's shadow file is configured to store only encrypted representations of passwords with a hash value of SHA512 with the following command:
$ grep ENCRYPT_METHOD /etc/login.defs
ENCRYPT_METHOD SHA512
If "ENCRYPT_METHOD" does not have a value of "SHA512", or the line is commented out, this is a finding.
STIG ID: ALMA-09-037530 | SRG: SRG-OS-000073-GPOS-00041 | Severity: high | CCI: | Vulnerability Id: V-269401
Passwords must be protected at all times, and encryption is the standard method for protecting passwords. If passwords are not encrypted, they can be plainly read (i.e., clear text) and easily compromised.
The system must use a strong hashing algorithm to store the password.
Configure AlmaLinux OS 9 to use the SHA-512 algorithm for password hashing.
Edit/modify the following line in the "/etc/pam.d/password-auth" file to include the sha512 option for pam_unix.so:
password sufficient pam_unix.so sha512 shadow rounds=100000 use_authtok
Verify that the pam_unix.so module is configured to use sha512 in /etc/pam.d/password-auth with the following command:
$ grep -E "password.*pam_unix.so.*sha512" /etc/pam.d/password-auth
password sufficient pam_unix.so sha512 shadow rounds=100000 use_authtok
If "sha512" is missing, or the line is commented out, this is a finding.
STIG ID: ALMA-09-037640 | SRG: SRG-OS-000073-GPOS-00041 | Severity: high | CCI: | Vulnerability Id: V-269402
Passwords must be protected at all times, and encryption is the standard method for protecting passwords. If passwords are not encrypted, they can be plainly read (i.e., clear text) and easily compromised.
The system must use a strong hashing algorithm to store the password.
Lock all interactive user accounts not using SHA-512 hashing until the passwords can be regenerated with SHA-512.
Verify that the interactive user account passwords are using a strong password hash with the following command:
$ cut -d: -f1,2 /etc/shadow
root:$6$88upzIIyml/6UEya$QMLbF.L6gMNnIhzcxRorHgubK6jl3CHZ.MZrMkrEApOlt/MP.N.BFea.ykhPnIS.EYICo6To42koq0DCH8AjB/
bin:*
daemon:*
Password hashes "!" or "*" indicate inactive accounts not available for logon and are not evaluated.
If any interactive user password hash does not begin with "$6", this is a finding.
STIG ID: ALMA-09-037750 | SRG: SRG-OS-000074-GPOS-00042 | Severity: high | CCI: | Vulnerability Id: V-269403
Passwords must be protected at all times, and encryption is the standard method for protecting passwords. If passwords are not encrypted, they can be plainly read (i.e., clear text) and easily compromised.
An FTP server provides an unencrypted file transfer mechanism that does not protect the confidentiality of user credentials or the remote session.
If a privileged user were to log on using this service, the privileged user password could be compromised. SFTP or other encrypted file transfer methods must be used instead.
Removing the server and client packages prevents inbound and outbound communications from being compromised.
Remove the default FTP client and server packages using the following command:
$ dnf remove vsftpd ftp
Verify that AlmaLinux OS 9 does not have an FTP client or server package installed with the following command:
$ rpm -qa | grep ftp
If the "vsftpd" server or "ftp" client packages are installed, this is a finding.
Note that there may be third-party or alternative packages that provide the same functionality, which should also be removed.
STIG ID: ALMA-09-037860 | SRG: SRG-OS-000074-GPOS-00042 | Severity: high | CCI: | Vulnerability Id: V-269404
Passwords must be protected at all times, and encryption is the standard method for protecting passwords. If passwords are not encrypted, they can be plainly read (i.e., clear text) and easily compromised.
A telnet server provides an unencrypted remote access mechanism that does not protect the confidentiality of user credentials or the remote session.
If a privileged user were to log on using this service, the privileged user password could be compromised. SSH or other encrypted session methods must be used instead.
Removing the server and client packages prevents inbound and outbound communications from being compromised.
Remove the default telnet client and server packages using the following command:
$ dnf remove telnet-server telnet
Verify that AlmaLinux OS 9 does not have a telnet client or server package installed with the following command:
$ rpm -qa | grep telnet
If the "telnet-server" server or "telnet" client packages are installed, this is a finding.
Note that there may be third-party or alternative packages that provide the same functionality, which should also be removed.
STIG ID: ALMA-09-037970 | SRG: SRG-OS-000076-GPOS-00044 | Severity: medium | CCI: | Vulnerability Id: V-269405
Any password, no matter how complex, can eventually be cracked. Therefore, Passwords must be changed periodically. If the operating system does not limit the lifetime of passwords and force users to change their passwords, there is the risk that the operating system passwords could be compromised.
Configure noncompliant accounts to enforce a 60-day maximum password lifetime restriction using the following command, substituting in the username:
$ chage -M 60 [user]
Check whether the maximum time period for existing passwords is restricted to 60 days with the following command:
$ awk -F: '$5 <= 0 || $5 > 60 {print $1 " " $5}' /etc/shadow
If any results are returned that are not associated with a system account, this is a finding.
STIG ID: ALMA-09-038080 | SRG: SRG-OS-000076-GPOS-00044 | Severity: medium | CCI: | Vulnerability Id: V-269406
Any password, no matter how complex, can eventually be cracked. Therefore, passwords must be changed periodically. If the operating system does not limit the lifetime of passwords and force users to change their passwords, there is the risk that the operating system passwords could be compromised.
Configure AlmaLinux OS 9 to enforce a 60-day maximum password lifetime.
Modify the "/etc/login.defs" file to set the "PASS_MAX_DAYS" parameter to 60 or greater:
PASS_MAX_DAYS 60
Verify that AlmaLinux OS 9 enforces a 60-day maximum password lifetime for new user accounts by running the following command:
$ grep PASS_MAX_DAYS /etc/login.defs
PASS_MAX_DAYS 60
If the "PASS_MAX_DAYS" parameter value is greater than "60", is not set, or is commented out, this is a finding.
STIG ID: ALMA-09-038190 | SRG: SRG-OS-000075-GPOS-00043 | Severity: medium | CCI: | Vulnerability Id: V-269407
Enforcing a minimum password lifetime helps to prevent repeated password changes to defeat the password reuse or history enforcement requirement. If users are allowed to immediately and continually change their password, then the password could be repeatedly changed in a short period of time to defeat the organization's policy regarding password reuse.
Checking existing users have this setting will ensure that no users created before the policy was configured can evade the password minimum setting.
Configure noncompliant accounts to enforce a 24 hours/one day minimum password lifetime using the following command, substituting in the username:
$ chage -m 1 [user]
Verify the minimum time period between password changes for all user accounts is a day or more by running the following command:
$ awk -F: '$4 < 1 {print $1 " " $4}' /etc/shadow
If any results are returned that are not associated with a system account, this is a finding.
STIG ID: ALMA-09-038300 | SRG: SRG-OS-000075-GPOS-00043 | Severity: medium | CCI: | Vulnerability Id: V-269408
Enforcing a minimum password lifetime helps to prevent repeated password changes to defeat the password reuse or history enforcement requirement. If users are allowed to immediately and continually change their password, then the password could be repeatedly changed in a short period of time to defeat the organization's policy regarding password reuse.
Configure AlmaLinux OS 9 to enforce 24 hours as the minimum password lifetime.
Modify the "/etc/login.defs" file to set the "PASS_MIN_DAYS" parameter to 1 or greater:
PASS_MIN_DAYS 1
Verify AlmaLinux OS 9 enforces 24 hours as the minimum password lifetime for new user accounts with the following command:
$ grep PASS_MIN_DAYS /etc/login.defs
PASS_MIN_DAYS 1
If the value of "PASS_MIN_DAYS" is less than "1", is not set, or is commented out, this is a finding.
STIG ID: ALMA-09-038630 | SRG: SRG-OS-000383-GPOS-00166 | Severity: medium | CCI: | Vulnerability Id: V-269409
Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks. If the information system or application allows the user to consecutively reuse their password when that password has exceeded its defined lifetime, the end result is a password that is not changed as per policy requirements.
If cached authentication information is out-of-date, the validity of the authentication information may be questionable.
Configure the SSSD to prohibit the use of cached authentications after one day.
Add/modify the following line in "/etc/sssd/sssd.conf" (or a conf file in /etc/sssd/conf.d/) just below the line [pam]:
offline_credentials_expiration = 1
Note: If smart card authentication is not being used on the system, this requirement is Not Applicable.
Verify that the System Security Services Daemon (SSSD) prohibits the use of cached authentications after one day.
Check that SSSD allows cached authentications with the following command:
$ grep cache_credentials /etc/sssd/sssd.conf /etc/sssd/conf.d/*
/etc/sssd/conf.d/certificate_verification.conf:cache_credentials = true
If "cache_credentials" is set to "false" or missing from the configuration, this is not a finding and no further checks are required.
If "cache_credentials" is set to "true", check that SSSD prohibits the use of cached authentications after one day with the following command:
$ grep offline_credentials_expiration /etc/sssd/sssd.conf /etc/sssd/conf.d/
/etc/sssd/conf.d/certificate_verification.conf:offline_credentials_expiration = 1
If "offline_credentials_expiration" is not set to a value of "1", this is a finding.
STIG ID: ALMA-09-038850 | SRG: SRG-OS-000067-GPOS-00035 | Severity: medium | CCI: | Vulnerability Id: V-269410
If the private key is discovered, an attacker can use the key to authenticate as an authorized user and gain access to the network infrastructure.
The cornerstone of the PKI is the private key used to encrypt or digitally sign information.
If the private key is stolen, this will lead to the compromise of the authentication and nonrepudiation gained through PKI because the attacker can use the private key to digitally sign documents and pretend to be the authorized user.
Both the holders of a digital certificate and the issuing authority must protect the computers, storage devices, or whatever they use to keep the private keys.
Create a new private and public key pair that uses a passcode, as the correct user, with the following command:
$ ssh-keygen -n [passphrase]
Verify the SSH private key files have a passcode.
For each private key stored on the system, use the following command:
$ ssh-keygen -y -f /path/to/file
If the contents of the key are displayed, instead of a passphrase prompt, this is a finding.
STIG ID: ALMA-09-038960 | SRG: SRG-OS-000068-GPOS-00036 | Severity: medium | CCI: | Vulnerability Id: V-269411
Without mapping the certificate used to authenticate to the user account, the ability to determine the identity of the individual user or group will not be available for forensic analysis.
Configure AlmaLinux OS 9 to map the authenticated identity to the user or group account by adding or modifying the certmap section of the "/etc/sssd/sssd.conf" file or a "*.conf" file within the "/etc/sssd/conf.d/" directory, based on the following example:
[certmap/testing.test/rule_name]
matchrule = .*EDIPI@mil
maprule = (userCertificate;binary={cert!bin})
domains = testing.test
The "sssd" service must be restarted for the changes to take effect. To restart the "sssd" service, run the following command:
$ systemctl restart sssd.service
Note: If the system administrator (SA) demonstrates the use of an approved alternate multifactor authentication method, this requirement is not applicable.
Verify the operating system implements Online Certificate Status Protocol (OCSP) and is using the proper digest value on the system with the following command:
$ grep certmap /etc/sssd/sssd.conf /etc/sssd/conf.d/*.conf
/etc/sssd/conf.d/mapping.conf:[certmap/testing.test/rule_name]
If the certmap section does not exist, ask the system administrator (SA) to indicate how certificates are mapped to accounts. If there is no evidence of certificate mapping, this is a finding.
STIG ID: ALMA-09-039070 | SRG: SRG-OS-000384-GPOS-00167 | Severity: medium | CCI: | Vulnerability Id: V-269412
Without path validation, an informed trust decision by the relying party cannot be made when presented with any certificate not already explicitly trusted.
A trust anchor is an authoritative entity represented via a public key and associated data. It is used in the context of public key infrastructures, X.509 digital certificates, and DNSSEC.
When there is a chain of trust, usually the top entity to be trusted becomes the trust anchor; it can be, for example, a Certification Authority (CA). A certification path starts with the subject certificate and proceeds through a number of intermediate certificates up to a trusted root certificate, typically issued by a trusted CA.
This requirement verifies that a certification path to an accepted trust anchor is used for certificate validation and that the path includes status information. Path validation is necessary for a relying party to make an informed trust decision when presented with any certificate not already explicitly trusted. Status information for certification paths includes certificate revocation lists or online certificate status protocol responses. Validation of the certificate status information is out of scope for this requirement.
Satisfies: SRG-OS-000384-GPOS-00167, SRG-OS-000066-GPOS-00034, SRG-OS-000775-GPOS-00230, SRG-OS-000780-GPOS-00240
Configure AlmaLinux OS 9, for PKI-based authentication, to validate certificates by constructing a certification path (which includes status information) to an accepted trust anchor.
Obtain a valid copy of the DOD root CA file from the PKI CA certificate bundle from cyber.mil and copy the DOD_PKE_CA_chain.pem into the following file:
/etc/sssd/pki/sssd_auth_ca_db.pem
Verify AlmaLinux OS 9 for PKI-based authentication has valid certificates by constructing a certification path (which includes status information) to an accepted trust anchor.
Check that the system has a valid DOD root CA installed with the following command:
$ openssl x509 -text -in /etc/sssd/pki/sssd_auth_ca_db.pem
Certificate:
Data:
Version: 3 (0x2)
Serial Number: 1 (0x1)
Signature Algorithm: sha256WithRSAEncryption
Issuer: C = US, O = U.S. Government, OU = DOD, OU = PKI, CN = DOD Root CA 3
Validity
Not Before: Mar 20 18:46:41 2012 GMT
Not After: Dec 30 18:46:41 2029 GMT
Subject: C = US, O = U.S. Government, OU = DOD, OU = PKI, CN = DOD Root CA 3
Subject Public Key Info:
Public Key Algorithm: rsaEncryption
If the root CA file is not a DOD-issued certificate with a valid date and installed in the "/etc/sssd/pki/sssd_auth_ca_db.pem" location, this is a finding.
STIG ID: ALMA-09-039290 | SRG: SRG-OS-000120-GPOS-00061 | Severity: medium | CCI: | Vulnerability Id: V-269413
The key derivation function (KDF) in Kerberos is not FIPS compatible.
Overriding the system crypto policy makes the behavior of Kerberos violate expectations, and makes system configuration more fragmented.
Configure Kerberos to use systemwide crypto policy.
Create a symlink pointing to system crypto policy in the Kerberos configuration using the following command:
$ ln -s /etc/crypto-policies/back-ends/krb5.config /usr/share/crypto-policies/FIPS/krb5.txt
Verify that the symlink exists and targets the correct Kerberos crypto policy, with the following command:
$ file /etc/crypto-policies/back-ends/krb5.config
/etc/crypto-policies/back-ends/krb5.config: symbolic link to /usr/share/crypto-policies/FIPS/krb5.txt
If the symlink does not exist or points to a different target, this is a finding.
STIG ID: ALMA-09-039400 | SRG: SRG-OS-000120-GPOS-00061 | Severity: medium | CCI: | Vulnerability Id: V-269414
Unapproved mechanisms used for authentication to the cryptographic module are not verified; therefore, cannot be relied upon to provide confidentiality or integrity and DOD data may be compromised.
AlmaLinux OS 9 systems using encryption are required to use FIPS-compliant mechanisms for authenticating to cryptographic modules.
The key derivation function (KDF) in Kerberos is not FIPS compatible. Ensuring the system does not have any keytab files present prevents system daemons from using Kerberos for authentication. A keytab is a file containing pairs of Kerberos principals and encrypted keys.
FIPS 140-3 is the current standard for validating that mechanisms used to access cryptographic modules use authentication that meets DOD requirements. This allows for Security Levels 1, 2, 3, or 4 for use on a general-purpose computing system.
Configure AlmaLinux OS 9 to prevent system daemons from using Kerberos for authentication.
Remove any files with the .keytab extension from the operating system.
rm -f /etc/*.keytab
Verify that AlmaLinux OS 9 prevents system daemons from using Kerberos for authentication with the following command:
$ ls -alR /etc/*.keytab
ls: cannot access '/etc/*.keytab': No such file or directory
If this command produces any "keytab" file(s), this is a finding.
STIG ID: ALMA-09-039510 | SRG: SRG-OS-000120-GPOS-00061 | Severity: medium | CCI: | Vulnerability Id: V-269415
Providing the ability for remote users or systems to initiate a secure VPN connection protects information when it is transmitted over a wide area network.
Install the libreswan package with the following command:
$ dnf install libreswan
Verify that the libreswan package is installed with the following command:
$ dnf list --installed libreswan
libreswan.x86_64 4.9-4.el9_2 @appstream
If the "libreswan" package is not installed, this is a finding.
STIG ID: ALMA-09-039620 | SRG: SRG-OS-000120-GPOS-00061 | Severity: medium | CCI: | Vulnerability Id: V-269416
The rsyslog-gnutls package provides Transport Layer Security (TLS) support for the rsyslog daemon, which enables secure remote logging.
Install the rsyslog-gnutls package with the following command:
$ dnf install rsyslog-gnutls
Verify that the rsyslog-gnutls package is installed with the following command:
$ dnf list --installed rsyslog-gnutls
rsyslog-gnutls.x86_64 8.2102.0-111.el9 @AppStream
If the "rsyslog-gnutls" package is not installed, this is a finding.
STIG ID: ALMA-09-039840 | SRG: SRG-OS-000394-GPOS-00174 | Severity: medium | CCI: | Vulnerability Id: V-269417
Centralized cryptographic policies simplify applying secure ciphers across an operating system and the applications that run on that operating system. Use of weak or untested encryption algorithms undermines the purposes of using encryption to protect data.
Satisfies: SRG-OS-000394-GPOS-00174, SRG-OS-000393-GPOS-00173
Install the crypto-policies package with the following command:
$ dnf install crypto-policies
Verify that the AlmaLinux OS 9 crypto-policies package is installed with the following command:
$ dnf list --installed crypto-policies
Installed Packages
crypto-policies.noarch 20221215-1.git9a18988.el9 @anaconda
If the "crypto-policies" package is not installed, this is a finding.
STIG ID: ALMA-09-040060 | SRG: SRG-OS-000394-GPOS-00174 | Severity: medium | CCI: | Vulnerability Id: V-269418
Centralized cryptographic policies simplify applying secure ciphers across an operating system and the applications that run on that operating system. Use of weak or untested encryption algorithms undermines the purposes of using encryption to protect data.
Satisfies: SRG-OS-000394-GPOS-00174, SRG-OS-000396-GPOS-00176
Configure the operating system to implement FIPS mode with the following command:
$ fips-mode-setup --enable
Reboot the system for the changes to take effect.
Verify that the AlmaLinux OS 9 cryptography policy has been configured correctly with the following commands:
$ update-crypto-policies --show
FIPS
If the cryptography is not set to "FIPS" and is not applied, this is a finding.
$ update-crypto-policies --check
The configured policy matches the generated policy.
If the command does not return "The configured policy matches the generated policy", this is a finding.
STIG ID: ALMA-09-040170 | SRG: SRG-OS-000395-GPOS-00175 | Severity: medium | CCI: | Vulnerability Id: V-269419
Terminating an unresponsive SSH session within a short time period reduces the window of opportunity for unauthorized personnel to take control of a management session enabled on the console or console port that has been left unattended. In addition, quickly terminating an idle SSH session will also free up resources committed by the managed network element.
Terminating network connections associated with communications sessions includes, for example, deallocating associated TCP/IP address/port pairs at the operating system level and deallocating networking assignments at the application level if multiple application sessions are using a single operating system-level network connection. This does not mean the operating system terminates all sessions or network access; it only ends the unresponsive session and releases the resources associated with that session.
Satisfies: SRG-OS-000395-GPOS-00175, SRG-OS-000163-GPOS-00072, SRG-OS-000279-GPOS-00109
To configure the SSH server to terminate a user session automatically after the SSH client has become unresponsive, add or modify the following lines in "/etc/ssh/sshd_config":
ClientAliveInterval 600
ClientAliveCountMax 1
Alternatively, add the settings to an include file if the line "Include /etc/ssh/sshd_config.d/*.conf" is found at the top of the "/etc/ssh/sshd_config" file:
$ cat << EOF | tee /etc/ssh/sshd_config.d/clientalive.conf
ClientAliveInterval 600
ClientAliveCountMax 1
EOF
Restart the SSH daemon for the settings to take effect:
$ systemctl restart sshd.service
Verify that the "ClientAliveInterval" variable is set to a value of "600" or less and "ClientAliveCountMax" is set to "1" by performing the following command:
$ sshd -T | grep clientalive
clientaliveinterval 600
clientalivecountmax 1
If "ClientAliveInterval" does not have a value of "600" or less, or "ClientAliveCountMax" is not set to "1", this is a finding.
STIG ID: ALMA-09-040390 | SRG: SRG-OS-000125-GPOS-00065 | Severity: high | CCI: | Vulnerability Id: V-269420
When UsePAM is set to "yes", PAM runs through account and session types properly. This is important when restricted access to services based off of IP, time, or other factors of the account is needed.
Additionally, this ensures users can inherit certain environment variables on login or disallow access to the server.
Configure the SSH daemon to use PAM.
Add the following line to "/etc/ssh/sshd_config", or uncomment the line and set the value to "yes":
UsePAM yes
Alternatively, add the setting to an include file if the line "Include /etc/ssh/sshd_config.d/*.conf" is found at the top of the "/etc/ssh/sshd_config" file:
$ cat << EOF | tee /etc/ssh/sshd_config.d/pam.conf
UsePAM yes
EOF
Restart the SSH daemon for the settings to take effect:
$ systemctl restart sshd.service
Verify the AlmaLinux OS 9 SSHD is configured to allow for the UsePAM interface with the following command:
$ sshd -T | grep usepam
usepam yes
If the "UsePAM" keyword is set to "no", is missing, or is commented out, this is a finding.
STIG ID: ALMA-09-040500 | SRG: SRG-OS-000163-GPOS-00072 | Severity: medium | CCI: | Vulnerability Id: V-269421
Terminating an idle session within a short time period reduces the window of opportunity for unauthorized personnel to take control of a management session enabled on the console or console port that has been left unattended. In addition, quickly terminating an idle session will also free up resources committed by the managed network element.
Terminating network connections associated with communications sessions includes, for example, de-allocating associated TCP/IP address/port pairs at the operating system level, and de-allocating networking assignments at the application level if multiple application sessions are using a single operating system-level network connection. This does not mean that the operating system terminates all sessions or network access; it only ends the inactive session and releases the resources associated with that session.
Configure AlmaLinux OS 9 to log out idle sessions.
Create the directory if necessary:
$ mkdir -p /etc/systemd/logind.conf.d/
Create a *.conf file in /etc/systemd/logind.conf.d/ with the following content:
[Login]
StopIdleSessionSec=900
KillUserProcesses=no
Restart systemd-logind:
$ systemctl restart systemd-logind
Verify that AlmaLinux OS 9 logs out sessions that are idle for 15 minutes with the following command:
$ systemd-analyze cat-config systemd/logind.conf | grep StopIdleSessionSec
#StopIdleSessionSec=infinity
StopIdleSessionSec=900
If "StopIdleSessionSec" is not configured to "900" seconds, this is a finding.
STIG ID: ALMA-09-040720 | SRG: SRG-OS-000132-GPOS-00067 | Severity: medium | CCI: | Vulnerability Id: V-269422
Loading and accessing the packet filters programs and maps using the bpf() system call has the potential of revealing sensitive information about the kernel state.
Configure AlmaLinux OS 9 to prevent privilege escalation through the kernel by disabling access to the bpf syscall with the following command:
$ echo "kernel.unprivileged_bpf_disabled = 1" > /etc/sysctl.d/60-bpf.conf
Load settings from all system configuration files with the following command:
$ sysctl --system
Verify AlmaLinux OS 9 prevents privilege escalation thru the kernel by disabling access to the bpf system call with the following commands:
$ sysctl kernel.unprivileged_bpf_disabled
kernel.unprivileged_bpf_disabled = 1
If the returned line does not have a value of "1", or a line is not returned, this is a finding.
Check that the configuration files are present to enable this kernel parameter.
$ /usr/lib/systemd/systemd-sysctl --cat-config | egrep -v '^(#|;)' | grep -F kernel.unprivileged_bpf_disabled | tail -1
kernel.unprivileged_bpf_disabled = 1
If "kernel.unprivileged_bpf_disabled" is not set to "1", or nothing is returned, this is a finding.
STIG ID: ALMA-09-040830 | SRG: SRG-OS-000132-GPOS-00067 | Severity: medium | CCI: | Vulnerability Id: V-269423
Exposing kernel pointers (through procfs or "seq_printf()") exposes kernel writeable structures, which may contain functions pointers. If a write vulnerability occurs in the kernel, allowing write access to any of this structure, the kernel can be compromised.
This option disallows any program without the CAP_SYSLOG capability to get the addresses of kernel pointers by replacing them with "0".
Configure AlmaLinux OS 9 to restrict exposed kernel pointer addresses access with the following command:
$ echo "kernel.kptr_restrict = 1" > /etc/sysctl.d/60-kptr.conf
Load settings from all system configuration files with the following command:
$ sysctl --system
Verify the runtime status of the kernel.kptr_restrict kernel parameter with the following command:
$ sysctl kernel.kptr_restrict
kernel.kptr_restrict = 1
Verify the configuration of the kernel.kptr_restrict kernel parameter with the following command:
$ /usr/lib/systemd/systemd-sysctl --cat-config | egrep -v '^(#|;)' | grep -F kernel.kptr_restrict | tail -1
kernel.kptr_restrict =1
If "kernel.kptr_restrict" is not set to "1" or is missing, this is a finding.
STIG ID: ALMA-09-040940 | SRG: SRG-OS-000132-GPOS-00067 | Severity: medium | CCI: | Vulnerability Id: V-269424
Unrestricted usage of ptrace allows compromised binaries to run ptrace on other processes of the user. Like this, the attacker can steal sensitive information from the target processes (e.g. SSH sessions, web browser etc.) without any additional assistance from the user (i.e. without resorting to phishing).
Configure AlmaLinux OS 9 to restrict usage of ptrace to with the following command:
$ echo "kernel.yama.ptrace_scope = 1" > /etc/sysctl.d/60-ptrace.conf
Load settings from all system configuration files with the following command:
$ sysctl --system
Verify AlmaLinux OS 9 restricts usage of ptrace to descendant processes (1), admins only (2), or disables ptrace entirely (3) with the following command:
$ sysctl kernel.yama.ptrace_scope
kernel.yama.ptrace_scope = 1
If the returned line has a value of "0" or a line is not returned, this is a finding.
Check that the configuration files are present to enable this kernel parameter.
$ /usr/lib/systemd/systemd-sysctl --cat-config | egrep -v '^(#|;)' | grep -F kernel.yama.ptrace_scope | tail -1
kernel.yama.ptrace_scope = 1
If "kernel.yama.ptrace_scope" is equal to "0" or nothing is returned, this is a finding.
STIG ID: ALMA-09-041050 | SRG: SRG-OS-000132-GPOS-00067 | Severity: medium | CCI: | Vulnerability Id: V-269425
Restricting access to the kernel message buffer limits access to only root. This prevents attackers from gaining additional system information as a nonprivileged user.
Satisfies: SRG-OS-000132-GPOS-00067, SRG-OS-000138-GPOS-00069
Configure AlmaLinux OS 9 to restrict access to the kernel message buffer with the following command:
$ echo "kernel.dmesg_restrict = 1 > /etc/sysctl.d/60-dmesg.conf"
Load settings from all system configuration files with the following command:
$ sysctl --system
Verify AlmaLinux OS 9 is configured to restrict access to the kernel message buffer with the following commands:
Check the status of the kernel.dmesg_restrict kernel parameter.
$ sysctl kernel.dmesg_restrict
kernel.dmesg_restrict = 1
If "kernel.dmesg_restrict" is not set to "1" or is missing, this is a finding.
Check that the configuration files are present to enable this kernel parameter.
$ /usr/lib/systemd/systemd-sysctl --cat-config | egrep -v '^(#|;)' | grep -F kernel.dmesg_restrict | tail -1
kernel.dmesg_restrict = 1
If "kernel.dmesg_restrict" is not set to "1" or is missing, this is a finding.
STIG ID: ALMA-09-041160 | SRG: SRG-OS-000132-GPOS-00067 | Severity: medium | CCI: | Vulnerability Id: V-269426
Setting the kernel.perf_event_paranoid kernel parameter to "2" prevents attackers from gaining additional system information as a nonprivileged user.
Satisfies: SRG-OS-000132-GPOS-00067, SRG-OS-000138-GPOS-00069
Configure AlmaLinux OS 9 to prevent kernel profiling by nonprivileged users with the following command:
$ echo "kernel.perf_event_paranoid = 2" > /etc/sysctl.d/60-perf.conf
Load settings from all system configuration files with the following command:
$ sysctl --system
Verify AlmaLinux OS 9 is configured to prevent kernel profiling by nonprivileged users with the following commands:
Check the status of the kernel.perf_event_paranoid kernel parameter.
$ sysctl kernel.perf_event_paranoid
kernel.perf_event_paranoid = 2
If "kernel.perf_event_paranoid" is not set to "2" or is missing, this is a finding.
Check that the configuration files are present to enable this kernel parameter.
$ /usr/lib/systemd/systemd-sysctl --cat-config | egrep -v '^(#|;)' | grep -F kernel.perf_event_paranoid | tail -1
kernel.perf_event_paranoid = 2
If "kernel.perf_event_paranoid" is not set to "2" or is missing, this is a finding.
STIG ID: ALMA-09-041270 | SRG: SRG-OS-000403-GPOS-00182 | Severity: medium | CCI: | Vulnerability Id: V-269427
Untrusted Certificate Authorities (CA) can issue certificates, but they may be issued by organizations or individuals that seek to compromise DOD systems or by organizations with insufficient security controls. If the CA used for verifying the certificate is not a DOD-approved CA, trust of this CA has not been established.
The DOD will only accept PKI-certificates obtained from a DOD-approved internal or external certificate authority. Reliance on CAs for the establishment of secure sessions includes, for example, the use of SSL/TLS certificates.
Configure AlmaLinux OS 9 to only allow the use of DOD PKI-established certificate authorities.
For each untrusted CA, export the certificate to a file and add it to the blocklist:
$ trust dump --filter "pkcs11:id=%7C%42%96%AE%DE%4B%48%3B%FA%92%F8%9E%8C%CF%6D%8B%A9%72%37%95;type=cert" > /etc/pki/ca-trust/source/blocklist/ISRGRootX2
$ update-ca-trust
Verify that the certificate is in the blocklist:
$ trust list --filter=blocklist
p11-kit: overriding trust for anchor in blocklist: ISRGRootX2
pkcs11:id=%7C%42%96%AE%DE%4B%48%3B%FA%92%F8%9E%8C%CF%6D%8B%A9%72%37%95;type=cert
type: certificate
label: ISRG Root X2
trust: distrusted
category: authority
pkcs11:id=%88%68%BF%E0%8E%35%C4%3B%38%6B%62%F7%28%3B%84%81%C8%0C%D7%4D;type=cert
type: certificate
label: Explicitly Distrust DigiNotar Root CA
trust: distrusted
category: authority
Verify AlmaLinux OS 9 only allows the use of DOD PKI-established certificate authorities using the following command:
$ trust list
pkcs11:id=%7C%42%96%AE%DE%4B%48%3B%FA%92%F8%9E%8C%CF%6D%8B%A9%72%37%95;type=cert
type: certificate
label: ISRG Root X2
trust: anchor
category: authority
If any nonapproved CAs are returned, this is a finding.
STIG ID: ALMA-09-041490 | SRG: SRG-OS-000269-GPOS-00103 | Severity: medium | CCI: | Vulnerability Id: V-269428
In the event of a system failure, AlmaLinux OS 9 must preserve any information necessary to determine cause of failure and any information necessary to return to operations with least disruption to system processes.
To enable the systemd-journald service, run the following command:
$ systemctl enable --now systemd-journald
Verify that "systemd-journald" is active with the following command:
$ systemctl status systemd-journald
systemd-journald.service - Journal Service
Loaded: loaded (/usr/lib/systemd/system/systemd-journald.service; static)
Active: active (running) since Tue 2024-02-20 11:02:20 UTC; 14min ago
If the systemd-journald service is not active, this is a finding.
STIG ID: ALMA-09-041600 | SRG: SRG-OS-000405-GPOS-00184 | Severity: high | CCI: | Vulnerability Id: V-269429
AlmaLinux OS 9 systems handling data requiring "data at rest" protections must employ cryptographic mechanisms to prevent unauthorized disclosure and modification of the information at rest.
Selection of a cryptographic mechanism is based on the need to protect the integrity of organizational information. The strength of the mechanism is commensurate with the security category and/or classification of the information. Organizations have the flexibility to either encrypt all information on storage devices (i.e., full disk encryption) or encrypt specific data structures (e.g., files, records, or fields).
Satisfies: SRG-OS-000405-GPOS-00184, SRG-OS-000404-GPOS-00183, SRG-OS-000185-GPOS-00079
Configure AlmaLinux OS 9 to prevent unauthorized modification of all information at rest by using disk encryption.
Encrypting a partition in an already installed system is more difficult, because existing partitions will need to be resized and changed.
To encrypt an entire partition, dedicate a partition for encryption in the partition layout.
Note: If there is a documented and approved reason for not having data-at-rest encryption at the operating system level, such as encryption provided by a hypervisor or a disk storage array in a virtualized environment, this requirement is Not Applicable.
Verify AlmaLinux OS 9 prevents unauthorized disclosure or modification of all information requiring at-rest protection by using disk encryption.
Verify all system partitions are encrypted with the following command:
$ lsblk -e11 -oNAME,FSTYPE,FSVER,MOUNTPOINTS
NAME FSTYPE FSVER MOUNTPOINTS
sda
+-sda1 vfat FAT16 /boot/efi
+-sda2 xfs /boot
+-sda3 LVM2_member LVM2 001
+-rootvg-root crypto_LUKS 2
¦ +-luks-8a7154ec-8eeb-46c8-9d75-66fc4b81d665 xfs /
+-rootvg-swap crypto_LUKS 2
¦ +-luks-89bf0df8-547f-4613-af07-215e5f63e9a9 swap 1 [SWAP]
+-rootvg-home crypto_LUKS 2
¦ +-luks-10a20c46-483d-4d12-831f-5328eda28fd1 xfs /home
+-rootvg-varlogaudit crypto_LUKS 2
¦ +-luks-29b74747-2f82-4472-82f5-0b5eb764effc xfs /var/log/audit
+-rootvg-varlog crypto_LUKS 2
¦ +-luks-e0d162f5-fad8-463e-8e39-6bd09e682961 xfs /var/log
+-rootvg-vartmp crypto_LUKS 2
¦ +-luks-0e7206e7-bfb1-4a23-ae14-b9cea7cf46d5 xfs /var/tmp
+-rootvg-var crypto_LUKS 2
+-luks-b23d8276-7844-4e79-8a58-505150b4eb42 xfs /var
Every persistent disk partition present must be of type "crypto_LUKS". If any partitions other than the /boot partitions are not type "crypto_LUKS", ask the administrator to indicate how the partitions are encrypted. If there is no evidence that these partitions are encrypted, this is a finding.
STIG ID: ALMA-09-041930 | SRG: SRG-OS-000134-GPOS-00068 | Severity: medium | CCI: | Vulnerability Id: V-269430
An isolation boundary provides access control and protects the integrity of the hardware, software, and firmware that perform security functions.
Security functions are the hardware, software, and/or firmware of the information system responsible for enforcing the system security policy and supporting the isolation of code and data on which the protection is based. Operating systems implement code separation (i.e., separation of security functions from nonsecurity functions) in a number of ways, including through the provision of security kernels via processor rings or processor modes. For nonkernel code, security function isolation is often achieved through file system protections that serve to protect the code on disk and address space protections that protect executing code.
Developers and implementers can increase the assurance in security functions by employing well-defined security policy models; structured, disciplined, and rigorous hardware and software development techniques; and sound system/security engineering principles. Implementation may include isolation of memory space and libraries. Operating systems restrict access to security functions through the use of access control mechanisms and by implementing least privilege capabilities.
Configure AlmaLinux OS 9 to verify correct operation of security functions.
Edit the file "/etc/selinux/config" and add or modify the following line:
SELINUX=enforcing
Update the grub bootloader settings:
$ grubby --args="selinux=1 enforcing=1" --update-kernel=ALL
A reboot is required for the changes to take effect.
Ensure that AlmaLinux OS 9 verifies correct operation of security functions through the use of SELinux with the following command:
$ getenforce
Enforcing
If SELINUX is not set to "Enforcing", this is a finding.
Verify that SELinux is configured to be enforcing at boot.
$ grep -E "^SELINUX=" /etc/selinux/config
SELINUX=enforcing
If SELINUX line is missing, commented out, or not set to "enforcing", this is a finding.
Verify that SELinux is enabled and Enforcing for all kernels:
$ grubby --info=ALL | grep -E 'selinux|enforcing'
args="ro audit=1 selinux=1 enforcing=1 audit_backlog_limit=8192 page_poison=1 vsyscall=none slub_debug=P pti=on iommu=force resume=/dev/mapper/luks-89bf0df8-547f-4613-af07-215e5f62e9a9 rd.luks.uuid=luks-8a7154ec-8eeb-46c8-9d75-66fc4b80d665 rd.lvm.lv=rootvg/root rd.luks.uuid=luks-89bf0df8-547f-4613-af07-215e5f62e9a9 rd.lvm.lv=rootvg/swap rd.shell=0 quiet splash fips=1 boot=UUID=eda01e9b-b7e1-431b-9549-16d5dcddf665"
args="ro audit=1 selinux=1 enforcing=1 audit_backlog_limit=8192 page_poison=1 vsyscall=none slub_debug=P pti=on iommu=force resume=/dev/mapper/luks-89bf0df8-547f-4613-af07-215e5f62e9a9 rd.luks.uuid=luks-8a7154ec-8eeb-46c8-9d75-66fc4b80d665 rd.lvm.lv=rootvg/root rd.luks.uuid=luks-89bf0df8-547f-4613-af07-215e5f62e9a9 rd.lvm.lv=rootvg/swap rd.shell=0 quiet splash fips=1 boot=UUID=eda01e9b-b7e1-431b-9549-16d5dcddf665"
If selinux=1 is missing or set to 0, or enforcing=1 is missing or set to 0, this is a finding.
STIG ID: ALMA-09-042040 | SRG: SRG-OS-000134-GPOS-00068 | Severity: medium | CCI: | Vulnerability Id: V-269431
Policycoreutils contains the policy core utilities that are required for basic operation of an SELinux-enabled system.
These utilities include load_policy to load SELinux policies, setfile to label filesystems, newrole to switch roles, and run_init to run /etc/init.d scripts in the proper context.
The policycoreutils package can be installed with the following command:
$ dnf install policycoreutils
Verify AlmaLinux OS 9 has the policycoreutils package installed with the following command:
$ dnf list --installed policycoreutils
policycoreutils.x86_64 3.5-1.el9 @anaconda
If the "policycoreutils" package is not installed, this is a finding.
STIG ID: ALMA-09-042150 | SRG: SRG-OS-000138-GPOS-00069 | Severity: medium | CCI: | Vulnerability Id: V-269432
If a world-writable directory is not owned by root, sys, bin, or an application user identifier (UID), unauthorized users may be able to modify files created by others.
The only authorized public directories are those temporary directories supplied with the system or those designed to be temporary file repositories. The setting is normally reserved for directories used by the system and by users for temporary file storage, (e.g., /tmp), and for directories requiring global read/write access.
Configure all public directories to be owned by root or a system account to prevent unauthorized and unintended information transferred via shared system resources.
Set the owner of all public directories as root or a system account using the command, replace "[Public Directory]" with any directory path not owned by root or a system account:
$ chown root [Public Directory]
Verify that world writable directories are owned by root, a system account, or an application account with the following command. It will discover and print world-writable directories that are not owned by root. Run it once for each local partition [PART] e.g. "/":
$ find PART -xdev -type d -perm -0002 -uid +0 -print
If there is output, this is a finding.
STIG ID: ALMA-09-042260 | SRG: SRG-OS-000138-GPOS-00069 | Severity: medium | CCI: | Vulnerability Id: V-269433
Preventing unauthorized information transfers mitigates the risk of information, including encrypted representations of information, produced by the actions of prior users/roles (or the actions of processes acting on behalf of prior users/roles) from being available to any current users/roles (or current processes) that obtain access to shared system resources (e.g., registers, main memory, hard disks) after those resources have been released back to information systems. The control of information in shared resources is also commonly referred to as object reuse and residual information protection.
This requirement generally applies to the design of an information technology product, but it can also apply to the configuration of particular information system components that are, or use, such products. This can be verified by acceptance/validation processes in DOD or other government agencies.
There may be shared resources with configurable protections (e.g., files in storage) that may be assessed on specific information system components.
Configure all world-writable directories to have the sticky bit set to prevent unauthorized and unintended information transferred via shared system resources.
Set the sticky bit on all world-writable directories using the command, replace "[World-Writable Directory]" with any directory path missing the sticky bit:
$ chmod a+t [World-Writable Directory]
Verify that all world-writable directories have the sticky bit set.
Determine if all world-writable directories have the sticky bit set by running the following command:
$ find / -type d \( -perm -0002 -a ! -perm -1000 \) -exec ls -ld {} \;
drwxrwxrwt 7 root root 4096 Jul 26 11:19 /tmp
If any of the returned directories are world-writable and do not have the sticky bit set (trailing "t"), this is a finding.
STIG ID: ALMA-09-042370 | SRG: SRG-OS-000420-GPOS-00186 | Severity: medium | CCI: | Vulnerability Id: V-269434
DoS is a condition when a resource is not available for legitimate users. When this occurs, the organization either cannot accomplish its mission or must operate at degraded capacity.
This requirement addresses the configuration of the operating system to mitigate the impact of DoS attacks that have occurred or are ongoing on system availability. For each system, known and potential DoS attacks must be identified and solutions for each type implemented. A variety of technologies exist to limit or, in some cases, eliminate the effects of DoS attacks (e.g., limiting processes or establishing memory partitions). Employing increased capacity and bandwidth, combined with service redundancy, may reduce the susceptibility to some DoS attacks.
Configure "nftables" to be the default "firewallbackend" for "firewalld" by adding or editing the following line in "etc/firewalld/firewalld.conf":
FirewallBackend=nftables
Establish rate-limiting rules based on organization-defined types of DoS attacks on impacted network interfaces.
Verify "nftables" is configured to allow rate limits on any connection to the system with the following command:
$ grep -i firewallbackend /etc/firewalld/firewalld.conf
# FirewallBackend
FirewallBackend=nftables
If the "nftables" is not set as the "FirewallBackend" default, this is a finding.
STIG ID: ALMA-09-042480 | SRG: SRG-OS-000420-GPOS-00186 | Severity: medium | CCI: | Vulnerability Id: V-269435
Denial of Service (DoS) is a condition when a resource is not available for legitimate users. When this occurs, the organization either cannot accomplish its mission or must operate at degraded capacity.
This requirement addresses the configuration of the operating system to mitigate the impact of DoS attacks that have occurred or are ongoing on system availability. For each system, known and potential DoS attacks must be identified and solutions for each type implemented. A variety of technologies exist to limit or, in some cases, eliminate the effects of DoS attacks (e.g., limiting processes or establishing memory partitions). Employing increased capacity and bandwidth, combined with service redundancy, may reduce the susceptibility to some DoS attacks.
Satisfies: SRG-OS-000420-GPOS-00186, SRG-OS-000142-GPOS-00071
Configure AlmaLinux OS 9 to use TCP syncookies using the following command:
$ echo 'net.ipv4.tcp_syncookies = 1' > /etc/sysctl.d/60-syncookies.conf
Load settings from all system configuration files with the following command:
$ sysctl --system
Verify AlmaLinux OS 9 is configured to use IPv4 TCP syncookies with the following command:
$ sysctl net.ipv4.tcp_syncookies
net.ipv4.tcp_syncookies = 1
Check that the configuration files are present to enable this kernel parameter.
$ /usr/lib/systemd/systemd-sysctl --cat-config | egrep -v '^(#|;)' | grep -F net.ipv4.tcp_syncookies | tail -1
net.ipv4.tcp_syncookies = 1
If the network parameter "ipv4.tcp_syncookies" is not equal to "1" or nothing is returned, this is a finding.
STIG ID: ALMA-09-042700 | SRG: SRG-OS-000423-GPOS-00187 | Severity: high | CCI: | Vulnerability Id: V-269436
Without protection of the transmitted information, confidentiality and integrity may be compromised because unprotected communications can be intercepted and either read or altered.
This requirement applies to both internal and external networks and all types of information system components from which information can be transmitted (e.g., servers, mobile devices, notebook computers, printers, copiers, scanners, and facsimile machines). Communication paths outside the physical protection of a controlled boundary are exposed to the possibility of interception and modification.
Protecting the confidentiality and integrity of organizational information can be accomplished by physical means (e.g., employing physical distribution systems) or by logical means (e.g., employing cryptographic techniques). If physical means of protection are employed, then logical means (cryptography) do not have to be employed, and vice versa.
The openssh client package can be installed with the following command:
$ dnf install openssh
Verify that AlmaLinux OS 9 has the openssh client package installed with the following command:
$ dnf list --installed openssh
Installed Packages
openssh.x86_64 8.7p1-28.el9 @anaconda
If the "openssh" client package is not installed, this is a finding.
STIG ID: ALMA-09-042810 | SRG: SRG-OS-000424-GPOS-00188 | Severity: medium | CCI: | Vulnerability Id: V-269437
Without protection of the transmitted information, confidentiality and integrity may be compromised because unprotected communications can be intercepted and either read or altered.
This requirement applies to both internal and external networks and all types of information system components from which information can be transmitted (e.g., servers, mobile devices, notebook computers, printers, copiers, scanners, and facsimile machines). Communication paths outside the physical protection of a controlled boundary are exposed to the possibility of interception and modification.
Protecting the confidentiality and integrity of organizational information can be accomplished by physical means (e.g., employing physical distribution systems) or by logical means (e.g., employing cryptographic techniques). If physical means of protection are employed, then logical means (cryptography) do not have to be employed, and vice versa.
Satisfies: SRG-OS-000424-GPOS-00188, SRG-OS-000426-GPOS-00190
To enable the sshd service run the following command:
$ systemctl enable --now sshd
Verify that "sshd" is active with the following command:
$ systemctl status sshd
sshd.service - OpenSSH server daemon
Loaded: loaded (/usr/lib/systemd/system/sshd.service; enabled; preset: enabled)
Active: active (running) since Fri 2024-01-26 09:41:09 UTC; 2h 48min ago
If the "sshd" service is not enabled and active, this is a finding.
STIG ID: ALMA-09-042920 | SRG: SRG-OS-000424-GPOS-00188 | Severity: medium | CCI: | Vulnerability Id: V-269438
Without protection of the transmitted information, confidentiality and integrity may be compromised because unprotected communications can be intercepted and either read or altered.
This requirement applies to both internal and external networks and all types of information system components from which information can be transmitted (e.g., servers, mobile devices, notebook computers, printers, copiers, scanners, and facsimile machines). Communication paths outside the physical protection of a controlled boundary are exposed to the possibility of interception and modification.
Protecting the confidentiality and integrity of organizational information can be accomplished by physical means (e.g., employing physical distribution systems) or by logical means (e.g., employing cryptographic techniques). If physical means of protection are employed, then logical means (cryptography) do not have to be employed, and vice versa.
Satisfies: SRG-OS-000424-GPOS-00188, SRG-OS-000426-GPOS-00190
The openssh-server package can be installed with the following command:
$ dnf install openssh-server
Verify that AlmaLinux OS 9 has the openssh-server package installed with the following command:
$ dnf list --installed openssh-server
Installed Packages
openssh-server.x86_64 8.7p1-28.el9 @anaconda
If the "openssh-server" package is not installed, this is a finding.
STIG ID: ALMA-09-043030 | SRG: SRG-OS-000425-GPOS-00189 | Severity: medium | CCI: | Vulnerability Id: V-269439
SSH environment options potentially allow users to bypass access restriction in some configurations.
To configure the system to prevent users from overriding SSH environment variables, add or modify the following line in "/etc/ssh/sshd_config":
PermitUserEnvironment no
Alternatively, add the setting to an include file if the line "Include /etc/ssh/sshd_config.d/*.conf" is found at the top of the "/etc/ssh/sshd_config" file:
$ echo "PermitUserEnvironment no" > /etc/ssh/sshd_config.d/environment.conf
Restart the SSH daemon for the settings to take effect:
$ systemctl restart sshd.service
Verify the SSH daemon prevents users from overriding SSH environment variables with the following command:
$ sshd -T | grep permituserenvironment
permituserenvironment no
If the "PermitUserEnvironment" keyword is set to "yes", or no output is returned, this is a finding.
STIG ID: ALMA-09-043140 | SRG: SRG-OS-000426-GPOS-00190 | Severity: medium | CCI: | Vulnerability Id: V-269440
Without cryptographic integrity protections, information can be altered by unauthorized users without detection.
Cryptographic mechanisms used for protecting the integrity of information include, for example, signed hash functions using asymmetric cryptography enabling distribution of the public key to verify the hash information while maintaining the confidentiality of the secret key used to generate the hash.
AlmaLinux OS 9 incorporates systemwide crypto policies by default. The employed algorithms can be viewed in the /etc/crypto-policies/back-ends/ directory.
Configure BIND to use the systemwide crypto policy.
Add the following line to the "options" section in "/etc/named.conf":
include "/etc/crypto-policies/back-ends/bind.config";
Note: If the "bind" package is not installed, this requirement is Not Applicable.
Verify that BIND uses the system crypto policy with the following command:
$ grep include /etc/named.conf
include "/etc/crypto-policies/back-ends/bind.config";
If BIND is installed and the BIND config file does not contain the "/etc/crypto-policies/back-ends/bind.config" directive, or the line is commented out, this is a finding.
STIG ID: ALMA-09-043250 | SRG: SRG-OS-000481-GPOS-00481 | Severity: medium | CCI: | Vulnerability Id: V-269441
This requirement applies to wireless peripheral technologies (e.g., wireless mice, keyboards, displays, etc.) used with AlmaLinux OS 9 systems.
Wireless peripherals (e.g., Wi-Fi/Bluetooth/IR keyboards, mice and pointing devices, and near field communications [NFC]) present a unique challenge by creating an open, unsecured port on a computer.
Wireless peripherals must meet DOD requirements for wireless data transmission and be approved for use by the authorizing official (AO). Even though some wireless peripherals, such as mice and pointing devices, do not ordinarily carry information that need to be protected, modification of communications with these wireless peripherals may be used to compromise the AlmaLinux OS 9 operating system.
Satisfies: SRG-OS-000481-GPOS-00481, SRG-OS-000299-GPOS-00117, SRG-OS-000300-GPOS-00118
Configure the system to disable all wireless network interfaces with the following command:
$ nmcli radio all off
Note: If the system does not have physical wireless network radios, this requirement is Not Applicable.
Verify there are no wireless interfaces configured on the system with the following commands:
$ nmcli radio all
WIFI-HW WIFI WWAN-HW WWAN
enabled enabled missing disabled
$ nmcli device status
DEVICE TYPE STATE CONNECTION
wlp2s0 wifi connected cafe
lo loopback connected (externally) lo
p2p-dev-wlp2s0 wifi-p2p disconnected --
enp3s0f2 ethernet unavailable --
If a wireless interface is configured and has not been documented and approved by the information system security officer (ISSO), this is a finding.
STIG ID: ALMA-09-043800 | SRG: SRG-OS-000206-GPOS-00084 | Severity: medium | CCI: | Vulnerability Id: V-269442
Only authorized personnel should be aware of errors and the details of the errors. Error messages are an indicator of an organization's operational state or can identify the AlmaLinux OS 9 system or platform.
Additionally, personally identifiable information (PII) and operational information must not be revealed through error messages to unauthorized personnel or their designated representatives.
The structure and content of error messages must be carefully considered by the organization and development team. The extent to which the information system is able to identify and handle error conditions is guided by organizational policy and operational requirements.
Configure the grub bootloader to use the "quiet" parameter using the following command:
$ grubby --update-kernel=ALL --args=quiet
Without using the "quiet" grub kernel parameter, the hardware and service information are printed to the console on boot and sometimes afterwards. This information could be useful for attackers with physical access, or so-called "shoulder surfers".
Boot failures will still be shown, as will the LUKS password prompt.
Verify the grub bootloader has the "quiet" option set with the following command:
$ grubby --info=ALL | grep quiet
args="ro audit=1 audit_backlog_limit=8192 page_poison=1 vsyscall=none slub_debug=P pti=on iommu=force resume=/dev/mapper/luks-89bf0df8-547f-4613-af07-215e5f62e9a9 rd.luks.uuid=luks-8a7154ec-8eeb-46c8-9d75-66fc4b80d665 rd.lvm.lv=rootvg/root rd.luks.uuid=luks-89bf0df8-547f-4613-af07-215e5f62e9a9 rd.lvm.lv=rootvg/swap rd.shell=0 quiet splash fips=1 boot=UUID=eda01e9b-b7e1-431b-9549-16d5dcddf665 selinux=1 enforcing=1"
args="ro audit=1 audit_backlog_limit=8192 page_poison=1 vsyscall=none slub_debug=P pti=on iommu=force resume=/dev/mapper/luks-89bf0df8-547f-4613-af07-215e5f62e9a9 rd.luks.uuid=luks-8a7154ec-8eeb-46c8-9d75-66fc4b80d665 rd.lvm.lv=rootvg/root rd.luks.uuid=luks-89bf0df8-547f-4613-af07-215e5f62e9a9 rd.lvm.lv=rootvg/swap rd.shell=0 quiet splash fips=1 boot=UUID=eda01e9b-b7e1-431b-9549-16d5dcddf665 selinux=1 enforcing=1"
If nothing is returned, this is a finding.
STIG ID: ALMA-09-043910 | SRG: SRG-OS-000206-GPOS-00084 | Severity: medium | CCI: | Vulnerability Id: V-269443
Only authorized personnel should be aware of errors and the details of the errors. Error messages are an indicator of an organization's operational state or can identify the AlmaLinux OS 9 system or platform.
Additionally, personally identifiable information (PII) and operational information must not be revealed through error messages to unauthorized personnel or their designated representatives.
The structure and content of error messages must be carefully considered by the organization and development team. The extent to which the information system is able to identify and handle error conditions is guided by organizational policy and operational requirements.
Configure the group-owner of the directory "/var/log" to "root" by running the following command:
$ chgrp root /var/log
Verify the "/var/log" directory is group-owned by root with the following command:
$ stat -c "%U:%G %#a %n" /var/log
root:root 0755 /var/log
If "/var/log" does not have a group-owner of "root", this is a finding.
STIG ID: ALMA-09-044020 | SRG: SRG-OS-000206-GPOS-00084 | Severity: medium | CCI: | Vulnerability Id: V-269444
Only authorized personnel should be aware of errors and the details of the errors. Error messages are an indicator of an organization's operational state or can identify the AlmaLinux OS 9 system or platform.
Additionally, personally identifiable information (PII) and operational information must not be revealed through error messages to unauthorized personnel or their designated representatives.
The structure and content of error messages must be carefully considered by the organization and development team. The extent to which the information system is able to identify and handle error conditions is guided by organizational policy and operational requirements.
Change the group-owner of the "/var/log/messages" file to "root" by running the following command:
$ chgrp root /var/log/messages
Verify the "/var/log/messages" file is group-owned by root with the following command:
$ stat -c "%U:%G %#a %n" /var/log
root:root 0755 /var/log
If "/var/log/messages" does not have a group-owner of "root", this is a finding.
STIG ID: ALMA-09-044130 | SRG: SRG-OS-000206-GPOS-00084 | Severity: medium | CCI: | Vulnerability Id: V-269445
Only authorized personnel should be aware of errors and the details of the errors. Error messages are an indicator of an organization's operational state or can identify the AlmaLinux OS 9 system or platform.
Additionally, personally identifiable information (PII) and operational information must not be revealed through error messages to unauthorized personnel or their designated representatives.
The structure and content of error messages must be carefully considered by the organization and development team. The extent to which the information system is able to identify and handle error conditions is guided by organizational policy and operational requirements.
Change the owner of the "/var/log/messages" file to "root" by running the following command:
$ chown root /var/log/messages
Verify the "/var/log/messages" file is owned by root with the following command:
$ stat -c "%U:%G %#a %n" /var/log
root:root 0755 /var/log
If "/var/log/messages" does not have an owner of "root", this is a finding.
STIG ID: ALMA-09-044240 | SRG: SRG-OS-000206-GPOS-00084 | Severity: medium | CCI: | Vulnerability Id: V-269446
Only authorized personnel should be aware of errors and the details of the errors. Error messages are an indicator of an organization's operational state or can identify the AlmaLinux OS 9 system or platform.
Additionally, personally identifiable information (PII) and operational information must not be revealed through error messages to unauthorized personnel or their designated representatives.
The structure and content of error messages must be carefully considered by the organization and development team. The extent to which the information system is able to identify and handle error conditions is guided by organizational policy and operational requirements.
Configure the "/var/log/messages" file to have a mode of "0640" by running the following command:
$ chmod 0640 /var/log/messages
Verify the "/var/log/messages" file has a mode of "0640" or less permissive with the following command:
$ stat -c "%U:%G %#a %n" /var/log/messages
root:root 0600 /var/log/messages
If "/var/log/messages" does not have a mode of "0640" or less permissive, this is a finding.
STIG ID: ALMA-09-044350 | SRG: SRG-OS-000206-GPOS-00084 | Severity: medium | CCI: | Vulnerability Id: V-269447
Only authorized personnel should be aware of errors and the details of the errors. Error messages are an indicator of an organization's operational state or can identify the AlmaLinux OS 9 system or platform.
Additionally, personally identifiable information (PII) and operational information must not be revealed through error messages to unauthorized personnel or their designated representatives.
The structure and content of error messages must be carefully considered by the organization and development team. The extent to which the information system is able to identify and handle error conditions is guided by organizational policy and operational requirements.
Configure the owner of the directory "/var/log" to "root" by running the following command:
$ chown root /var/log
Verify the "/var/log" directory is owned by root with the following command:
$ stat -c "%U:%G %#a %n" /var/log
root:root 0755 /var/log
If "/var/log" does not have an owner of "root", this is a finding.
STIG ID: ALMA-09-044460 | SRG: SRG-OS-000206-GPOS-00084 | Severity: medium | CCI: | Vulnerability Id: V-269448
Only authorized personnel should be aware of errors and the details of the errors. Error messages are an indicator of an organization's operational state or can identify the AlmaLinux OS 9 system or platform.
Additionally, personally identifiable information (PII) and operational information must not be revealed through error messages to unauthorized personnel or their designated representatives.
The structure and content of error messages must be carefully considered by the organization and development team. The extent to which the information system is able to identify and handle error conditions is guided by organizational policy and operational requirements.
Configure the "/var/log" directory to a mode of "0755" by running the following command:
$ chmod 0755 /var/log
Verify that the "/var/log" directory has a mode of "0755" or less permissive with the following command:
$ stat -c "%U:%G %#a %n" /var/log
root:root 0755 /var/log
If "/var/log" does not have a mode of "0755" or less permissive, this is a finding.
STIG ID: ALMA-09-044570 | SRG: SRG-OS-000433-GPOS-00192 | Severity: medium | CCI: | Vulnerability Id: V-269449
ExecShield uses the segmentation feature on all x86 systems to prevent execution in memory higher than a certain address. It writes an address as a limit in the code segment descriptor, to control where code can be executed, on a per-process basis.
When the kernel places the memory regions of a process, such as the stack and heap, higher than this address, the hardware prevents execution in that address range.
Update the GRUB 2 bootloader configuration to ensure the noexec kernel parameter is not enabled using the following command:
$ grubby --update-kernel=ALL --remove-args=noexec
Enable the NX bit execute protection in the system BIOS.
Verify ExecShield is enabled on 64-bit AlmaLinux OS 9 systems with the following command:
$ dmesg | grep '[NX|DX]*protection'
[ 0.000000] NX (Execute Disable) protection: active
If "dmesg" does not show "NX (Execute Disable) protection active", this is a finding.
STIG ID: ALMA-09-044680 | SRG: SRG-OS-000433-GPOS-00192 | Severity: medium | CCI: | Vulnerability Id: V-269450
Kernel page-table isolation is a kernel feature that mitigates the Meltdown security vulnerability and hardens the kernel against attempts to bypass kernel address space layout randomization (KASLR).
Configure AlmaLinux OS 9 to enable kernel page-table isolation with the following command:
$ grubby --update-kernel=ALL --args="pti=on"
Add or modify the following line in "/etc/default/grub" to ensure the configuration survives kernel updates:
GRUB_CMDLINE_LINUX="pti=on"
Verify AlmaLinux OS 9 enables kernel page-table isolation with the following command:
$ grubby --info=ALL | grep pti
args="ro audit=1 selinux=1 enforcing=1 audit_backlog_limit=8192 page_poison=1 vsyscall=none slub_debug=P pti=on iommu=force resume=/dev/mapper/luks-88bf0df8-547f-4613-af07-215e5f62e9a9 rd.luks.uuid=luks-8a7154ec-8eeb-47c8-9d75-66fd4b80d665 rd.lvm.lv=rootvg/root rd.luks.uuid=luks-89bf0df8-547f-4613-af07-215e5f62e9a9 rd.lvm.lv=rootvg/swap rd.shell=0 quiet splash fips=1 boot=UUID=eda01e9b-b7e1-431b-9549-16d5dcddf665"
If the "pti" entry does not equal "on", or is missing, this is a finding.
Check that kernel page-table isolation is enabled by default to persist in kernel updates:
$ grep pti /etc/default/grub
GRUB_CMDLINE_LINUX="pti=on"
If "pti" is not set to "on", is missing or commented out, this is a finding.
STIG ID: ALMA-09-044790 | SRG: SRG-OS-000433-GPOS-00192 | Severity: medium | CCI: | Vulnerability Id: V-269451
Poisoning writes an arbitrary value to freed pages, so any modification or reference to that page after being freed or before being initialized will be detected and prevented.
This prevents many types of use-after-free vulnerabilities at some performance cost. Also prevents leak of data and detection of corrupted memory.
SLAB objects are blocks of physically contiguous memory. SLUB is the unqueued SLAB allocator.
Configure AlmaLinux OS 9 to enable poisoning of SLUB/SLAB objects with the following commands:
$ grubby --update-kernel=ALL --args="slub_debug=P"
Add or modify the following line in "/etc/default/grub" to ensure the configuration survives kernel updates:
GRUB_CMDLINE_LINUX="slub_debug=P"
Verify that GRUB 2 is configured to enable poisoning of SLUB/SLAB objects to mitigate use-after-free vulnerabilities with the following commands:
Check that the current GRUB 2 configuration has poisoning of SLUB/SLAB objects enabled:
$ grubby --info=ALL | grep args | grep -v 'slub_debug=P'
If any output is returned, this is a finding.
Check that poisoning of SLUB/SLAB objects is enabled by default to persist in kernel updates:
$ grep slub_debug /etc/default/grub
GRUB_CMDLINE_LINUX="slub_debug=P"
If "slub_debug" is not set to "P", is missing or commented out, this is a finding.
STIG ID: ALMA-09-044900 | SRG: SRG-OS-000433-GPOS-00193 | Severity: medium | CCI: | Vulnerability Id: V-269452
ASLR makes it more difficult for an attacker to predict the location of attack code they have introduced into a process' address space during an attempt at exploitation.
Additionally, ASLR makes it more difficult for an attacker to know the location of existing code to repurpose it using return oriented programming (ROP) techniques.
Configure the system to enable ASLR with the following command:
$ echo 'kernel.randomize_va_space = 2' > /etc/sysctl.d/60-aslr.conf
Reload settings from all system configuration files with the following command:
$ sysctl --system
Verify AlmaLinux OS 9 is implementing ASLR with the following command:
$ sysctl kernel.randomize_va_space
kernel.randomize_va_space = 2
If "kernel.randomize_va_space" is not set to "2", or is missing, this is a finding.
STIG ID: ALMA-09-045120 | SRG: SRG-OS-000437-GPOS-00194 | Severity: medium | CCI: | Vulnerability Id: V-269453
Previous versions of software components that are not removed from the information system after updates have been installed may be exploited by some adversaries.
Configure AlmaLinux OS 9 to remove all software components after updated versions have been installed.
Run the following command to change the configuration of DNF:
$ dnf config-manager --setopt clean_requirements_on_remove=1 --save
Verify AlmaLinux OS 9 removes all software components after updated versions have been installed with the following command:
$ dnf config-manager --dump | grep clean
clean_requirements_on_remove = 1
If "clean_requirements_on_remove" is not set to "1", this is a finding.
STIG ID: ALMA-09-045125 | SRG: SRG-OS-000439-GPOS-00195 | Severity: high | CCI: | Vulnerability Id: V-269454
Security flaws with operating systems are discovered daily. Vendors are constantly updating and patching their products to address newly discovered security vulnerabilities. Organizations (including any contractor to the organization) are required to promptly install security-relevant software updates (e.g., patches, service packs, and hot fixes). Flaws discovered during security assessments, continuous monitoring, incident response activities, or information system error handling must also be addressed expeditiously.
Upgrade to a supported version of AlmaLinux.
Verify that the version of AlmaLinux is vendor supported with the following command:
$ hostnamectl status | grep -i system
AlmaLinux OS 9.2 (Turquois Kodkod)
If the installed version of AlmaLinux is not supported, this is a finding.
STIG ID: ALMA-09-045230 | SRG: SRG-OS-000445-GPOS-00199 | Severity: medium | CCI: | Vulnerability Id: V-269455
Setting the SELinux policy to "targeted" or a more specialized policy ensures the system will confine processes that are likely to be targeted for exploitation, such as network or system services.
Note: During the development or debugging of SELinux modules, it is common to temporarily place nonproduction systems in "permissive" mode. In such temporary cases, SELinux policies should be developed, and once work is completed, the system should be reconfigured to "targeted".
Configure AlmaLinux OS 9 to use the targeted SELINUX policy.
Edit the file "/etc/selinux/config" and add or modify the following line:
SELINUXTYPE=targeted
A reboot is required for the changes to take effect.
Verify the SELinux on AlmaLinux OS 9 is using the targeted policy with the following command:
$ sestatus | grep policy
Loaded policy name: targeted
If the loaded policy name is not "targeted", this is a finding.
STIG ID: ALMA-09-045340 | SRG: SRG-OS-000445-GPOS-00199 | Severity: medium | CCI: | Vulnerability Id: V-269456
Without verification of the security functions, security functions may not operate correctly and the failure may go unnoticed. Security function is defined as the hardware, software, and/or firmware of the information system responsible for enforcing the system security policy and supporting the isolation of code and data on which the protection is based. Security functionality includes, but is not limited to, establishing system accounts, configuring access authorizations (i.e., permissions, privileges), setting events to be audited, and setting intrusion detection parameters.
This requirement applies to operating systems performing security function verification/testing and/or systems and environments that require this functionality.
Satisfies: SRG-OS-000445-GPOS-00199, SRG-OS-000446-GPOS-00200, SRG-OS-000363-GPOS-00150
Install AIDE, initialize it, and perform a manual check.
Install AIDE:
$ dnf install aide
Initialize AIDE:
$ /usr/sbin/aide --init
Example output:
Start timestamp: 2024-01-26 09:59:41 +0000 (AIDE 0.16)
AIDE initialized database at /var/lib/aide/aide.db.new.gz
Number of entries: 27922
---------------------------------------------------
The attributes of the (uncompressed) database(s):
---------------------------------------------------
/var/lib/aide/aide.db.new.gz
MD5 : p2o2MgLyXqLfsHGmHWR9nQ==
SHA1 : C5R2JcZCSv3KRz0dMrcQ0JZdZV4=
SHA256 : tUAG19G4gskBEfN+Z9pyVJi13rHA9f7P
d9R5OivGk40=
SHA512 : u26Um0w9hzsMmwZHNssCsmuxVqr9kBx+
Qx+9UBNQCBXlmWFCbq2Yx88BPCU5s/qy
njPIODmPRg4I09jxs5KYjw==
End timestamp: 2024-01-26 09:59:49 +0000 (run time: 0m 8s)
The new database will need to be renamed to be read by AIDE:
$ mv /var/lib/aide/aide.db.new.gz /var/lib/aide/aide.db.gz
Perform a manual check:
$ /usr/sbin/aide --check
Example output:
Start timestamp: 2024-01-26 10:00:50 +0000 (AIDE 0.16)
AIDE found NO differences between database and filesystem. Looks okay!!
Verify that AlmaLinux OS 9 has the AIDE package installed with the following command:
$ dnf list --installed aide
aide.x86_64 0.16-100.el9 @AppStream
If AIDE is not installed, ask the system administrator (SA) how file integrity checks are performed on the system.
If there is no application installed to perform integrity checks, this is a finding.
If AIDE is installed, check if it has been initialized with the following command:
$ /usr/sbin/aide --check
If the output is "Couldn't open file /var/lib/aide/aide.db.gz for reading", this is a finding.
STIG ID: ALMA-09-045450 | SRG: SRG-OS-000447-GPOS-00201 | Severity: medium | CCI: | Vulnerability Id: V-269457
Unauthorized changes to the baseline configuration could make the system vulnerable to various attacks or allow unauthorized access to the operating system. Changes to operating system configurations can have unintended side effects, some of which may be relevant to security.
Detecting such changes and providing an automated response can help avoid unintended, negative consequences that could ultimately affect the security state of the operating system. The operating system's information management officer (IMO)/information system security officer (ISSO) and system administrators (SAs) must be notified via email and/or monitoring system trap when there is an unauthorized modification of a configuration item.
Notifications provided by information systems include messages to local computer consoles, and/or hardware indications, such as lights.
This capability must take into account operational requirements for availability for selecting an appropriate response. The organization may choose to shut down or restart the information system upon security function anomaly detection.
Satisfies: SRG-OS-000447-GPOS-00201, SRG-OS-000446-GPOS-00200, SRG-OS-000363-GPOS-00150
Configure the file integrity tool to run automatically on the system at least weekly and to notify designated personnel if baseline configurations are changed in an unauthorized manner. The AIDE tool can be configured to email designated personnel with the use of the cron system.
The following example output is generic. It will set cron to run AIDE daily and to send email at the completion of the analysis:
$ more /etc/cron.d/0aide
/usr/sbin/aide --check | echo "Subject: $HOSTNAME - Daily aide integrity check run" | /bin/mail -t root
Verify that AlmaLinux OS 9 routinely executes a file integrity scan for changes to the system baseline. The command used in the example will use a daily occurrence.
Check the cron directories for scripts controlling the execution and notification of results of the file integrity application. For example, if Advanced Intrusion Detection Environment (AIDE) is installed on the system, use the following commands:
$ find /etc/cron* -name '*aide*'
/etc/cron.d/0aide
$ grep aide /etc/crontab /var/spool/cron/root
/var/spool/cron/root:30 04 * * * root /usr/sbin/aide --check
$ more /etc/cron.d/aide
@daily root /usr/sbin/aide --check | /bin/mail -s "$HOSTNAME - Daily aide integrity check run" root
If the file integrity application does not exist, or a script file controlling the execution of the file integrity application does not exist, or the file integrity application does not notify designated personnel of changes, this is a finding.
STIG ID: ALMA-09-045670 | SRG: SRG-OS-000062-GPOS-00031 | Severity: medium | CCI: | Vulnerability Id: V-269458
Without establishing what type of events occurred, the source of events, where events occurred, and the outcome of events, it would be difficult to establish, correlate, and investigate the events leading up to an outage or attack.
If option "local_events" is not set to "yes", only events from network will be aggregated.
Configure AlmaLinux OS 9 to generate audit records for local events by adding or updating the following line in "/etc/audit/auditd.conf":
local_events = yes
The audit daemon must be restarted for the changes to take effect.
Verify that the AlmaLinux OS 9 audit system is configured to audit local events with the following command:
$ grep local_events /etc/audit/auditd.conf
local_events = yes
If "local_events" is not set to "yes", if the command does not return a line, or the line is commented out, this is a finding.
STIG ID: ALMA-09-045780 | SRG: SRG-OS-000063-GPOS-00032 | Severity: medium | CCI: | Vulnerability Id: V-269459
Without the capability to restrict which roles and individuals can select which events are audited, unauthorized personnel may be able to prevent the auditing of critical events. Misconfigured audits may degrade the system's performance by overwhelming the audit log. Misconfigured audits may also make it more difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Set the mode of /etc/audit/auditd.conf file to 0640 with the command:
$ chmod 0640 /etc/audit/auditd.conf
Verify the mode of /etc/audit/auditd.conf with the command:
$ stat -c "%#a %n" /etc/audit/auditd.conf
0640 /etc/audit/auditd.conf
If "/etc/audit/auditd.conf" does not have a mode of "0640", this is a finding.
STIG ID: ALMA-09-045890 | SRG: SRG-OS-000063-GPOS-00032 | Severity: medium | CCI: | Vulnerability Id: V-269460
Without the capability to restrict which roles and individuals can select which events are audited, unauthorized personnel may be able to prevent the auditing of critical events. Misconfigured audits may degrade the system's performance by overwhelming the audit log. Misconfigured audits may also make it more difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Configure the "/etc/audit/rules.d/*.rules", "/etc/audit/audit.rules" and "/etc/audit/auditd.conf" files to have a mode of "0640" with the following command:
$ chmod 0640 /etc/audit/rules.d/*.rules /etc/audit/auditd.conf /etc/audit/audit.rules
Verify that the following files have a mode of "0640" or less permissive with the following command:
$ stat -c "%U:%G %#a %n" /etc/audit/rules.d/*.rules /etc/audit/audit.rules /etc/audit/auditd.conf
root:root 0600 /etc/audit/rules.d/audit.rules
root:root 0640 /etc/audit/audit.rules
root:root 0640 /etc/audit/auditd.conf
If the files file have a mode more permissive than "0640", this is a finding.
STIG ID: ALMA-09-046000 | SRG: SRG-OS-000477-GPOS-00222 | Severity: medium | CCI: | Vulnerability Id: V-269461
Without generating audit records specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Audit records can be generated from various components within the information system (e.g., module or policy filter).
When a user logs on, the auid is set to the uid of the account being authenticated. Daemons are not user sessions and have the loginuid set to -1. The auid representation is an unsigned 32-bit integer, which equals 4294967295. The audit system interprets -1, 4294967295, and "unset" in the same way.
The system call rules are loaded into a matching engine that intercepts each system call made by all programs on the system. Therefore, it is very important to use system call rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance can be helped, however, by combining system calls into one rule whenever possible.
Satisfies: SRG-OS-000477-GPOS-00222, SRG-OS-000471-GPOS-00215
Configure AlmaLinux OS 9 to generate audit records upon successful/unsuccessful attempts to use the "init" command.
Add the following lines to the "/etc/audit/rules.d/audit.rules" file:
-a always,exit -F path=/usr/sbin/init -F perm=x -F auid>=1000 -F auid!=unset -k privileged-init
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Verify that AlmaLinux OS 9 is configured to audit the execution of the "init" command with the following command:
$ auditctl -l | grep init
-a always,exit -S all -F path=/usr/sbin/init -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged-init
If the command does not return a line, or the line is commented out, this is a finding.
STIG ID: ALMA-09-046220 | SRG: SRG-OS-000477-GPOS-00222 | Severity: medium | CCI: | Vulnerability Id: V-269462
Without generating audit records specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Audit records can be generated from various components within the information system (e.g., module or policy filter).
When a user logs on, the auid is set to the uid of the account being authenticated. Daemons are not user sessions and have the loginuid set to -1. The auid representation is an unsigned 32-bit integer, which equals 4294967295. The audit system interprets -1, 4294967295, and "unset" in the same way.
The system call rules are loaded into a matching engine that intercepts each system call made by all programs on the system. Therefore, it is very important to use system call rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance can be helped, however, by combining system calls into one rule whenever possible.
Satisfies: SRG-OS-000477-GPOS-00222, SRG-OS-000471-GPOS-00215
Configure AlmaLinux OS 9 to generate audit records upon successful/unsuccessful attempts to use the "poweroff" command.
Add the following to the "/etc/audit/rules.d/audit.rules" file:
-a always,exit -F path=/usr/sbin/poweroff -F perm=x -F auid>=1000 -F auid!=unset -k privileged-poweroff
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Verify that AlmaLinux OS 9 is configured to audit the execution of the "poweroff" command with the following command:
$ auditctl -l | grep poweroff
-a always,exit -S all -F path=/usr/sbin/poweroff -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged-poweroff
If the command does not return an audit rule for "poweroff" or any of the lines returned are commented out, this is a finding.
STIG ID: ALMA-09-046330 | SRG: SRG-OS-000477-GPOS-00222 | Severity: medium | CCI: | Vulnerability Id: V-269463
Without generating audit records specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Audit records can be generated from various components within the information system (e.g., module or policy filter).
When a user logs on, the auid is set to the uid of the account being authenticated. Daemons are not user sessions and have the loginuid set to -1. The auid representation is an unsigned 32-bit integer, which equals 4294967295. The audit system interprets -1, 4294967295, and "unset" in the same way.
The system call rules are loaded into a matching engine that intercepts each system call made by all programs on the system. Therefore, it is very important to use system call rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance can be helped, however, by combining system calls into one rule whenever possible.
Satisfies: SRG-OS-000477-GPOS-00222, SRG-OS-000471-GPOS-00215
Configure AlmaLinux OS 9 to generate audit records upon successful/unsuccessful attempts to use the "reboot" command.
Add the following to the "/etc/audit/rules.d/audit.rules" file:
-a always,exit -F path=/usr/sbin/reboot -F perm=x -F auid>=1000 -F auid!=unset -k privileged-reboot
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Verify that AlmaLinux OS 9 is configured to audit the execution of the "reboot" command with the following command:
$ auditctl -l | grep reboot
-a always,exit -S all -F path=/usr/sbin/reboot -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged-reboot
If the command does not return an audit rule for "reboot" or any of the lines returned are commented out, this is a finding.
STIG ID: ALMA-09-046440 | SRG: SRG-OS-000477-GPOS-00222 | Severity: medium | CCI: | Vulnerability Id: V-269464
Without generating audit records specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Audit records can be generated from various components within the information system (e.g., module or policy filter).
When a user logs on, the auid is set to the uid of the account being authenticated. Daemons are not user sessions and have the loginuid set to -1. The auid representation is an unsigned 32-bit integer, which equals 4294967295. The audit system interprets -1, 4294967295, and "unset" in the same way.
The system call rules are loaded into a matching engine that intercepts each system call made by all programs on the system. Therefore, it is very important to use system call rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance can be helped, however, by combining system calls into one rule whenever possible.
Satisfies: SRG-OS-000477-GPOS-00222, SRG-OS-000471-GPOS-00215
Configure AlmaLinux OS 9 to generate audit records upon successful/unsuccessful attempts to use the "shutdown" command.
Add the following to the "/etc/audit/rules.d/audit.rules" file:
-a always,exit -F path=/usr/sbin/shutdown -F perm=x -F auid>=1000 -F auid!=unset -k privileged-shutdown
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Verify that AlmaLinux OS 9 is configured to audit the execution of the "shutdown" command with the following command:
$ auditctl -l | grep shutdown
-a always,exit -S all -F path=/usr/sbin/shutdown -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged-shutdown
If the command does not return an audit rule for "shutdown" or any of the lines returned are commented out, this is a finding.
STIG ID: ALMA-09-046550 | SRG: SRG-OS-000477-GPOS-00222 | Severity: medium | CCI: | Vulnerability Id: V-269465
Without generating audit records specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Audit records can be generated from various components within the information system (e.g., module or policy filter).
When a user logs on, the auid is set to the uid of the account being authenticated. Daemons are not user sessions and have the loginuid set to -1. The auid representation is an unsigned 32-bit integer, which equals 4294967295. The audit system interprets -1, 4294967295, and "unset" in the same way.
The system call rules are loaded into a matching engine that intercepts each system call made by all programs on the system. Therefore, it is very important to use system call rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance can be helped, however, by combining system calls into one rule whenever possible.
Configure AlmaLinux OS 9 to enable Linux audit logging of the USBGuard daemon by adding or modifying the following line in "/etc/usbguard/usbguard-daemon.conf":
AuditBackend=LinuxAudit
Note: If the USBGuard daemon is not installed and enabled, this requirement is not applicable.
Verify AlmaLinux OS 9 enables Linux audit logging of the USBGuard daemon with the following commands.
$ grep AuditBackend /etc/usbguard/usbguard-daemon.conf
AuditBackend=LinuxAudit
If the "AuditBackend" entry does not equal "LinuxAudit", is missing, or the line is commented out, this is a finding.
STIG ID: ALMA-09-046660 | SRG: SRG-OS-000477-GPOS-00222 | Severity: medium | CCI: | Vulnerability Id: V-269466
Without generating audit records specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Audit records can be generated from various components within the information system (e.g., module or policy filter).
When a user logs on, the auid is set to the uid of the account being authenticated. Daemons are not user sessions and have the loginuid set to -1. The auid representation is an unsigned 32-bit integer, which equals 4294967295. The audit system interprets -1, 4294967295, and "unset" in the same way.
The system call rules are loaded into a matching engine that intercepts each system call made by all programs on the system. Therefore, it is very important to use system call rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance can be helped, however, by combining system calls into one rule whenever possible.
Satisfies: SRG-OS-000477-GPOS-00222, SRG-OS-000471-GPOS-00216
Configure AlmaLinux OS 9 to generate an audit event for any successful/unsuccessful use of the "delete_module", "init_module" and "finit_module" system calls.
Add the following lines to the "/etc/audit/rules.d/audit.rules" file:
-a always,exit -F arch=b32 -S init_module,finit_module -F auid>=1000 -F auid!=unset -k module_chng
-a always,exit -F arch=b64 -S init_module,finit_module -F auid>=1000 -F auid!=unset -k module_chng
-a always,exit -F arch=b32 -S delete_module -F auid>=1000 -F auid!=unset -k module_chng
-a always,exit -F arch=b64 -S delete_module -F auid>=1000 -F auid!=unset -k module_chng
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Verify that AlmaLinux OS 9 is configured to audit the execution of the "delete_module", "init_module" and "finit_module" system calls with the following command:
$ auditctl -l | grep module
-a always,exit -F arch=b32 -S init_module,finit_module -F auid>=1000 -F auid!=unset -k module_chng
-a always,exit -F arch=b64 -S init_module,finit_module -F auid>=1000 -F auid!=unset -k module_chng
-a always,exit -F arch=b32 -S delete_module -F auid>=1000 -F auid!=unset -k module_chng
-a always,exit -F arch=b64 -S delete_module -F auid>=1000 -F auid!=unset -k module_chng
If both the "b32" and "b64" audit rules are not defined for the "delete_module", "init_module" and "finit_module" system calls, or any of the lines returned are commented out, this is a finding.
STIG ID: ALMA-09-046770 | SRG: SRG-OS-000392-GPOS-00172 | Severity: medium | CCI: | Vulnerability Id: V-269467
Without generating audit records specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Audit records can be generated from various components within the information system (e.g., module or policy filter).
When a user logs on, the auid is set to the uid of the account being authenticated. Daemons are not user sessions and have the loginuid set to -1. The auid representation is an unsigned 32-bit integer, which equals 4294967295. The audit system interprets -1, 4294967295, and "unset" in the same way.
The system call rules are loaded into a matching engine that intercepts each system call made by all programs on the system. Therefore, it is very important to use system call rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance can be helped, however, by combining system calls into one rule whenever possible.
Satisfies: SRG-OS-000392-GPOS-00172, SRG-OS-000470-GPOS-00214, SRG-OS-000473-GPOS-00218
Configure AlmaLinux OS 9 to generate audit records for all account creations, modifications, disabling, and termination events that affect "/var/log/tallylog".
Add the following to the "/etc/audit/rules.d/audit.rules" file:
-w /var/log/tallylog -p wa -k logins
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Reboot the server so the changes to take effect.
Verify AlmaLinux OS 9 generates audit records for all account creations, modifications, disabling, and termination events that affect "/var/log/tallylog" with the following command:
$ grep /var/log/tallylog /etc/audit/audit.rules
-w /var/log/tallylog -p wa -k logins
If the command does not return a line or the line is commented out, this is a finding.
STIG ID: ALMA-09-046880 | SRG: SRG-OS-000255-GPOS-00096 | Severity: medium | CCI: | Vulnerability Id: V-269468
Without information that establishes the identity of the subjects (i.e., users or processes acting on behalf of users) associated with the events, security personnel cannot determine responsibility for the potentially harmful event.
Edit the /etc/audit/auditd.conf file and add or update the "log_format" option:
log_format = ENRICHED
The audit daemon must be restarted for changes to take effect.
Verify that the AlmaLinux OS 9 audit system is configured to resolve audit information before writing to disk with the following command:
$ grep log_format /etc/audit/auditd.conf
log_format = ENRICHED
If the "log_format" option is not "ENRICHED", or the line is commented out, this is a finding.
STIG ID: ALMA-09-047100 | SRG: SRG-OS-000037-GPOS-00015 | Severity: medium | CCI: | Vulnerability Id: V-269469
Without establishing what type of events occurred, the source of events, where events occurred, and the outcome of events, it would be difficult to establish, correlate, and investigate the events leading up to an outage or attack.
Audit record content that may be necessary to satisfy this requirement includes, for example, time stamps, source and destination addresses, user/process identifiers, event descriptions, success/fail indications, filenames involved, and access control or flow control rules invoked.
Associating event types with detected events in audit logs provides a means of investigating an attack, recognizing resource usage or capacity thresholds, or identifying an improperly configured AlmaLinux OS 9 system.
Satisfies: SRG-OS-000037-GPOS-00015, SRG-OS-000038-GPOS-00016, SRG-OS-000039-GPOS-00017, SRG-OS-000040-GPOS-00018, SRG-OS-000041-GPOS-00019, SRG-OS-000042-GPOS-00020, SRG-OS-000042-GPOS-00021, SRG-OS-000051-GPOS-00024, SRG-OS-000392-GPOS-00172, SRG-OS-000473-GPOS-00218, SRG-OS-000472-GPOS-00217, SRG-OS-000474-GPOS-00219, SRG-OS-000365-GPOS-00152, SRG-OS-000358-GPOS-00145, SRG-OS-000348-GPOS-00136, SRG-OS-000349-GPOS-00137, SRG-OS-000350-GPOS-00138, SRG-OS-000351-GPOS-00139, SRG-OS-000352-GPOS-00140, SRG-OS-000353-GPOS-00141, SRG-OS-000354-GPOS-00142, SRG-OS-000337-GPOS-00129, SRG-OS-000062-GPOS-00031, SRG-OS-000054-GPOS-00025
Install the AlmaLinux OS 9 audit package with the following command:
$ dnf install audit
Verify that the audit package is installed with the following command:
$ dnf list --installed audit
Installed Packages
audit.x86_64 3.0.7-103.el9 @anaconda
If the "audit" package is not installed, this is a finding.
STIG ID: ALMA-09-047540 | SRG: SRG-OS-000037-GPOS-00015 | Severity: medium | CCI: | Vulnerability Id: V-269470
Without generating audit records specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Audit records can be generated from various components within the information system (e.g., module or policy filter).
When a user logs on, the auid is set to the uid of the account being authenticated. Daemons are not user sessions and have the loginuid set to -1. The auid representation is an unsigned 32-bit integer, which equals 4294967295. The audit system interprets -1, 4294967295, and "unset" in the same way.
The system call rules are loaded into a matching engine that intercepts each system call made by all programs on the system. Therefore, it is very important to use system call rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance can be helped, however, by combining system calls into one rule whenever possible.
Satisfies: SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000473-GPOS-00218, SRG-OS-000470-GPOS-00214
Configure AlmaLinux OS 9 to generate audit records for all account creations, modifications, disabling, and termination events that affect "/var/log/lastlog".
Add the following to the "/etc/audit/rules.d/audit.rules" file:
-w /var/log/lastlog -p wa -k logins
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Reboot the server so the changes to take effect.
Verify AlmaLinux OS 9 generates audit records for all account creations, modifications, disabling, and termination events that affect "/var/log/lastlog" with the following command:
$ grep /var/log/lastlog /etc/audit/audit.rules
-w /var/log/lastlog -p wa -k logins
If the command does not return a line, or the line is commented out, this is a finding.
STIG ID: ALMA-09-047650 | SRG: SRG-OS-000037-GPOS-00015 | Severity: medium | CCI: | Vulnerability Id: V-269471
Without generating audit records specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Audit records can be generated from various components within the information system (e.g., module or policy filter).
When a user logs on, the auid is set to the uid of the account being authenticated. Daemons are not user sessions and have the loginuid set to -1. The auid representation is an unsigned 32-bit integer, which equals 4294967295. The audit system interprets -1, 4294967295, and "unset" in the same way.
The system call rules are loaded into a matching engine that intercepts each system call made by all programs on the system. Therefore, it is very important to use system call rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance can be helped, however, by combining system calls into one rule whenever possible.
Satisfies: SRG-OS-000037-GPOS-00015, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215
Configure AlmaLinux OS 9 to generate audit records upon successful/unsuccessful attempts to use the "umount" command.
Add the following to the "/etc/audit/rules.d/audit.rules" file:
-a always,exit -F path=/usr/bin/mount -F perm=x -F auid>=1000 -F auid!=unset -k privileged-mount
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Verify that AlmaLinux OS 9 is configured to audit the execution of the "mount" command with the following command:
$ auditctl -l | grep mount
-a always,exit -F path=/usr/bin/mount -F perm=x -F auid>=1000 -F auid!=unset -k privileged-mount
If the command does not return an audit rule for "/usr/bin/mount" or any of the lines returned are commented out, this is a finding.
STIG ID: ALMA-09-047760 | SRG: SRG-OS-000037-GPOS-00015 | Severity: medium | CCI: | Vulnerability Id: V-269472
Without generating audit records specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Audit records can be generated from various components within the information system (e.g., module or policy filter).
When a user logs on, the auid is set to the uid of the account being authenticated. Daemons are not user sessions and have the loginuid set to -1. The auid representation is an unsigned 32-bit integer, which equals 4294967295. The audit system interprets -1, 4294967295, and "unset" in the same way.
The system call rules are loaded into a matching engine that intercepts each system call made by all programs on the system. Therefore, it is very important to use system call rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance can be helped, however, by combining system calls into one rule whenever possible.
Satisfies: SRG-OS-000037-GPOS-00015, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215
Configure AlmaLinux OS 9 to generate audit records upon successful/unsuccessful attempts to use the "umount" command.
Add the following to the "/etc/audit/rules.d/audit.rules" file:
-a always,exit -F path=/usr/bin/umount -F perm=x -F auid>=1000 -F auid!=unset -k privileged-mount
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Verify that AlmaLinux OS 9 is configured to audit the execution of the "umount" command with the following command:
$ auditctl -l | grep umount
-a always,exit -F path=/usr/bin/umount -F perm=x -F auid>=1000 -F auid!=unset -k privileged-mount
If the command does not return an audit rule for "umount" or any of the lines returned are commented out, this is a finding.
STIG ID: ALMA-09-047870 | SRG: SRG-OS-000037-GPOS-00015 | Severity: medium | CCI: | Vulnerability Id: V-269473
Without generating audit records specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Audit records can be generated from various components within the information system (e.g., module or policy filter).
When a user logs on, the auid is set to the uid of the account being authenticated. Daemons are not user sessions and have the loginuid set to -1. The auid representation is an unsigned 32-bit integer, which equals 4294967295. The audit system interprets -1, 4294967295, and "unset" in the same way.
The system call rules are loaded into a matching engine that intercepts each system call made by all programs on the system. Therefore, it is very important to use system call rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance can be helped, however, by combining system calls into one rule whenever possible.
Satisfies: SRG-OS-000037-GPOS-00015, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215
Configure AlmaLinux OS 9 to generate audit records upon successful/unsuccessful attempts to use the "umount2" syscall.
Add the following to the "/etc/audit/rules.d/audit.rules" file:
-a always,exit -F arch=b32 -S umount2 -F auid>=1000 -F auid!=unset -k perm_mod
-a always,exit -F arch=b64 -S umount2 -F auid>=1000 -F auid!=unset -k perm_mod
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Verify that AlmaLinux OS 9 is configured to audit the execution of the "umount2" system call with the following command:
$ auditctl -l | grep umount2
-a always,exit -F arch=b32 -S umount2 -F auid>=1000 -F auid!=unset -F key=perm_mod
-a always,exit -F arch=b64 -S umount2 -F auid>=1000 -F auid!=unset -F key=perm_mod
If both the "b32" and "b64" audit rules are not defined for the "umount2" system call, or any of the lines returned are commented out, this is a finding.
STIG ID: ALMA-09-047980 | SRG: SRG-OS-000037-GPOS-00015 | Severity: medium | CCI: | Vulnerability Id: V-269474
Without the capability to generate audit records, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
If auditing is enabled late in the startup process, the actions of some startup processes may not be audited. Some audit systems also maintain state information only available if auditing is enabled before a given process is created.
Satisfies: SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000473-GPOS-00218, SRG-OS-000254-GPOS-00095
Enable auditing of processes that start prior to the audit daemon with the following command:
$ grubby --update-kernel=ALL --args="audit=1"
Verify that GRUB 2 is configured to enable auditing of processes that start prior to the audit daemon with the following commands:
Check that the all GRUB2 entries have auditing enabled:
$ grubby --info=ALL | grep audit
args="ro audit=1 selinux=1 enforcing=1 audit_backlog_limit=8192 page_poison=1 vsyscall=none slub_debug=P pti=on iommu=force boot=UUID=eda01e9b-b7e1-431b-9549-16d5dcddf665 resume=/dev/mapper/luks-89bf0df8-547f-4613-af07-215e5f62e9a9 rd.luks.uuid=luks-8a7154ec-8eeb-46c8-9d75-66fc4b80d665 rd.lvm.lv=rootvg/root rd.luks.uuid=luks-89bf0df8-547f-4613-af07-215e5f62e9a9 rd.lvm.lv=rootvg/swap fips=1 rd.shell=0 quiet splash"
If "audit" is not set to "1" or is missing, this is a finding.
Check that auditing is enabled by default to persist in kernel updates:
$ grep audit /etc/default/grub
GRUB_CMDLINE_LINUX="audit=1 selinux=1 enforcing=1 audit_backlog_limit=8192 page_poison=1 vsyscall=none slub_debug=P pti=on iommu=force boot=UUID=eda01e9b-b7e1-431b-9549-16d5dcddf665 resume=/dev/mapper/luks-89bf0df8-547f-4613-af07-215e5f62e9a9 rd.luks.uuid=luks-8a7154ec-8eeb-46c8-9d75-66fc4b80d665 rd.lvm.lv=rootvg/root rd.luks.uuid=luks-89bf0df8-547f-4613-af07-215e5f62e9a9 rd.lvm.lv=rootvg/swap fips=1 rd.shell=0 quiet splash"
If "audit" is not set to "1", is missing, or is commented out, this is a finding.
STIG ID: ALMA-09-048090 | SRG: SRG-OS-000037-GPOS-00015 | Severity: medium | CCI: | Vulnerability Id: V-269475
Without generating audit records specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Audit records can be generated from various components within the information system (e.g., module or policy filter).
When a user logs on, the auid is set to the uid of the account being authenticated. Daemons are not user sessions and have the loginuid set to -1. The auid representation is an unsigned 32-bit integer, which equals 4294967295. The audit system interprets -1, 4294967295, and "unset" in the same way.
The system call rules are loaded into a matching engine that intercepts each system call made by all programs on the system. Therefore, it is very important to use system call rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance can be helped, however, by combining system calls into one rule whenever possible.
Satisfies: SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000064-GPOS-00033, SRG-OS-000458-GPOS-00203, SRG-OS-000461-GPOS-00205
Configure AlmaLinux OS 9 to generate audit records upon successful/unsuccessful attempts to use the "truncate", "ftruncate", "creat", "open", "openat", and "open_by_handle_at" syscalls.
Add the following to the "/etc/audit/rules.d/audit.rules" file:
-a always,exit -F arch=b64 -S creat,open,openat,truncate,ftruncate -F exit=-EACCES -F auid>=1000 -F auid!=unset -k access
-a always,exit -F arch=b64 -S creat,open,openat,truncate,ftruncate -F exit=-EPERM -F auid>=1000 -F auid!=unset -k access
-a always,exit -F arch=b32 -S creat,open,openat,truncate,ftruncate -F exit=-EACCES -F auid>=1000 -F auid!=unset -k access
-a always,exit -F arch=b32 -S creat,open,openat,truncate,ftruncate -F exit=-EPERM -F auid>=1000 -F auid!=unset -k access
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Verify that AlmaLinux OS 9 is configured to audit the execution of the "truncate", "ftruncate", "creat", "open", "openat", and "open_by_handle_at" system calls with the following command:
$ grep -E 'open|truncate|creat' /etc/audit/audit.rules
-a always,exit -F arch=b32 -S open,creat,truncate,ftruncate,openat,open_by_handle_at -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=perm_access
-a always,exit -F arch=b64 -S open,truncate,ftruncate,creat,openat,open_by_handle_at -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=perm_access
-a always,exit -F arch=b32 -S open,creat,truncate,ftruncate,openat,open_by_handle_at -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=perm_access
-a always,exit -F arch=b64 -S open,truncate,ftruncate,creat,openat,open_by_handle_at -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=perm_access
If both the "b32" and "b64" audit rules are not defined for the "truncate", "ftruncate", "creat", "open", "openat", and "open_by_handle_at" system calls, or any of the lines returned are commented out, this is a finding.
STIG ID: ALMA-09-048200 | SRG: SRG-OS-000037-GPOS-00015 | Severity: medium | CCI: | Vulnerability Id: V-269476
Without generating audit records specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Audit records can be generated from various components within the information system (e.g., module or policy filter).
When a user logs on, the auid is set to the uid of the account being authenticated. Daemons are not user sessions and have the loginuid set to -1. The auid representation is an unsigned 32-bit integer, which equals 4294967295. The audit system interprets -1, 4294967295, and "unset" in the same way.
The system call rules are loaded into a matching engine that intercepts each system call made by all programs on the system. Therefore, it is very important to use system call rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance can be helped, however, by combining system calls into one rule whenever possible.
Satisfies: SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000466-GPOS-00210
Configure AlmaLinux OS 9 to generate audit records upon successful/unsuccessful attempts to use the "chacl" command.
Add the following to the "/etc/audit/rules.d/audit.rules" file:
-a always,exit -F path=/usr/bin/chacl -F perm=x -F auid>=1000 -F auid!=unset -k perm_mod
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Verify that AlmaLinux OS 9 is configured to audit the execution of the "chacl" command with the following command:
$ grep /chacl /etc/audit/audit.rules
-a always,exit -S all -F path=/usr/bin/chacl -F perm=x -F auid>=1000 -F auid!=unset -F key=perm_mod
If the command does not return an audit rule for "chacl" or any of the lines returned are commented out, this is a finding.
STIG ID: ALMA-09-048310 | SRG: SRG-OS-000037-GPOS-00015 | Severity: medium | CCI: | Vulnerability Id: V-269477
Without generating audit records specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Audit records can be generated from various components within the information system (e.g., module or policy filter).
When a user logs on, the auid is set to the uid of the account being authenticated. Daemons are not user sessions and have the loginuid set to -1. The auid representation is an unsigned 32-bit integer, which equals 4294967295. The audit system interprets -1, 4294967295, and "unset" in the same way.
The system call rules are loaded into a matching engine that intercepts each system call made by all programs on the system. Therefore, it is very important to use system call rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance can be helped, however, by combining system calls into one rule whenever possible.
Satisfies: SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000468-GPOS-00212, SRG-OS-000471-GPOS-00215
Configure AlmaLinux OS 9 to generate audit records upon successful/unsuccessful attempts to use the "chage" command.
Add the following to the "/etc/audit/rules.d/audit.rules" file:
-a always,exit -F path=/usr/bin/chage -F perm=x -F auid>=1000 -F auid!=unset -k privileged
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Verify that AlmaLinux OS 9 is configured to audit the execution of the "chage" command with the following command:
$ grep /chage /etc/audit/audit.rules
-a always,exit -S all -F path=/usr/bin/chage -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged-chage
If the command does not return an audit rule for "chage" or any of the lines returned are commented out, this is a finding.
STIG ID: ALMA-09-048420 | SRG: SRG-OS-000037-GPOS-00015 | Severity: medium | CCI: | Vulnerability Id: V-269478
Without generating audit records specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Audit records can be generated from various components within the information system (e.g., module or policy filter).
When a user logs on, the auid is set to the uid of the account being authenticated. Daemons are not user sessions and have the loginuid set to -1. The auid representation is an unsigned 32-bit integer, which equals 4294967295. The audit system interprets -1, 4294967295, and "unset" in the same way.
The system call rules are loaded into a matching engine that intercepts each system call made by all programs on the system. Therefore, it is very important to use system call rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance can be helped, however, by combining system calls into one rule whenever possible.
Satisfies: SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000468-GPOS-00212, SRG-OS-000471-GPOS-00215, SRG-OS-000463-GPOS-00207, SRG-OS-000465-GPOS-00209
Configure AlmaLinux OS 9 to generate audit records upon successful/unsuccessful attempts to use the "chcon" command.
Add the following to the "/etc/audit/rules.d/audit.rules" file:
-a always,exit -F path=/usr/bin/chcon -F perm=x -F auid>=1000 -F auid!=unset -k perm_mod
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Verify that AlmaLinux OS 9 is configured to audit the execution of the "chcon" command with the following command:
$ grep /chcon /etc/audit/audit.rules
-a always,exit -S all -F path=/usr/bin/chcon -F perm=x -F auid>=1000 -F auid!=unset -F key=perm_mod
If the command does not return an audit rule for "chcon" or any of the lines returned are commented out, this is a finding.
STIG ID: ALMA-09-048530 | SRG: SRG-OS-000037-GPOS-00015 | Severity: medium | CCI: | Vulnerability Id: V-269479
Without generating audit records specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Audit records can be generated from various components within the information system (e.g., module or policy filter).
When a user logs on, the auid is set to the uid of the account being authenticated. Daemons are not user sessions and have the loginuid set to -1. The auid representation is an unsigned 32-bit integer, which equals 4294967295. The audit system interprets -1, 4294967295, and "unset" in the same way.
The system call rules are loaded into a matching engine that intercepts each system call made by all programs on the system. Therefore, it is very important to use system call rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance can be helped, however, by combining system calls into one rule whenever possible.
Satisfies: SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000064-GPOS-00033, SRG-OS-000466-GPOS-00210, SRG-OS-000458-GPOS-00203
Configure AlmaLinux OS 9 to generate audit records upon successful/unsuccessful attempts to use the "chmod", "fchmod", and "fchmodat" syscalls.
Add the following lines to the "/etc/audit/rules.d/audit.rules" file:
-a always,exit -F arch=b32 -S chmod,fchmod,fchmodat -F auid>=1000 -F auid!=unset -k perm_mod
-a always,exit -F arch=b64 -S chmod,fchmod,fchmodat -F auid>=1000 -F auid!=unset -k perm_mod
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Verify that AlmaLinux OS 9 is configured to audit the execution of the "chmod", "fchmod", and "fchmodat" system calls with the following command:
$ auditctl -l | grep chmod
-a always,exit -F arch=b32 -S chmod,fchmod,fchmodat -F auid>=1000 -F auid!=unset -k perm_mod
-a always,exit -F arch=b64 -S chmod,fchmod,fchmodat -F auid>=1000 -F auid!=unset -k perm_mod
If both the "b32" and "b64" audit rules are not defined for the "chmod", "fchmod", and "fchmodat" system calls, this is a finding.
STIG ID: ALMA-09-048640 | SRG: SRG-OS-000037-GPOS-00015 | Severity: medium | CCI: | Vulnerability Id: V-269480
Without generating audit records specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Audit records can be generated from various components within the information system (e.g., module or policy filter).
When a user logs on, the auid is set to the uid of the account being authenticated. Daemons are not user sessions and have the loginuid set to -1. The auid representation is an unsigned 32-bit integer, which equals 4294967295. The audit system interprets -1, 4294967295, and "unset" in the same way.
The system call rules are loaded into a matching engine that intercepts each system call made by all programs on the system. Therefore, it is very important to use system call rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance can be helped, however, by combining system calls into one rule whenever possible.
Satisfies: SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000064-GPOS-00033, SRG-OS-000466-GPOS-00210, SRG-OS-000458-GPOS-00203, SRG-OS-000474-GPOS-00219
Configure AlmaLinux OS 9 to generate audit records upon successful/unsuccessful attempts to use the "chown", "fchown", and "fchownat" and "lchown" syscalls.
Add the following to the "/etc/audit/rules.d/audit.rules" file:
-a always,exit -F arch=b32 -S chown,fchown,fchownat,lchown -F auid>=1000 -F auid!=unset -k perm_mod
-a always,exit -F arch=b64 -S chown,fchown,fchownat,lchown -F auid>=1000 -F auid!=unset -k perm_mod
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Verify that AlmaLinux OS 9 is configured to audit the execution of the "chown", "fchown", "fchownat", and "lchown" system calls with the following command:
$ auditctl -l | grep chown
-a always,exit -F arch=b32 -S chown,fchown,fchownat,lchown -F auid>=1000 -F auid!=unset -k perm_mod
-a always,exit -F arch=b64 -S chown,fchown,fchownat,lchown -F auid>=1000 -F auid!=unset -k perm_mod
If both the "b32" and "b64" audit rules are not defined for the "chown", "fchown", "fchownat", and "lchown" system calls, this is a finding.
STIG ID: ALMA-09-048750 | SRG: SRG-OS-000037-GPOS-00015 | Severity: medium | CCI: | Vulnerability Id: V-269481
Without generating audit records specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Audit records can be generated from various components within the information system (e.g., module or policy filter).
When a user logs on, the auid is set to the uid of the account being authenticated. Daemons are not user sessions and have the loginuid set to -1. The auid representation is an unsigned 32-bit integer, which equals 4294967295. The audit system interprets -1, 4294967295, and "unset" in the same way.
The system call rules are loaded into a matching engine that intercepts each system call made by all programs on the system. Therefore, it is very important to use system call rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance can be helped, however, by combining system calls into one rule whenever possible.
Satisfies: SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215
Configure AlmaLinux OS 9 to generate audit records upon successful/unsuccessful attempts to use the "chsh" command.
Add the following to the "/etc/audit/rules.d/audit.rules" file:
-a always,exit -F path=/usr/bin/chsh -F perm=x -F auid>=1000 -F auid!=unset -k priv_cmd
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Verify that AlmaLinux OS 9 is configured to audit the execution of the "chsh" command with the following command:
$ auditctl -l | grep chsh
-a always,exit -S all -F path=/usr/bin/chsh -F perm=x -F auid>=1000 -F auid!=unset -F key=priv_cmd
If the command does not return an audit rule for "chsh" or any of the lines returned are commented out, this is a finding.
STIG ID: ALMA-09-048860 | SRG: SRG-OS-000037-GPOS-00015 | Severity: medium | CCI: | Vulnerability Id: V-269482
Without generating audit records specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Audit records can be generated from various components within the information system (e.g., module or policy filter).
When a user logs on, the auid is set to the uid of the account being authenticated. Daemons are not user sessions and have the loginuid set to -1. The auid representation is an unsigned 32-bit integer, which equals 4294967295. The audit system interprets -1, 4294967295, and "unset" in the same way.
The system call rules are loaded into a matching engine that intercepts each system call made by all programs on the system. Therefore, it is very important to use system call rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance can be helped, however, by combining system calls into one rule whenever possible.
Satisfies: SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215
Configure AlmaLinux OS 9 to generate audit records upon successful/unsuccessful attempts to use the "crontab" command.
Add the following to the "/etc/audit/rules.d/audit.rules" file:
-a always,exit -F path=/usr/bin/crontab -F perm=x -F auid>=1000 -F auid!=unset -k privileged-crontab
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Verify that AlmaLinux OS 9 is configured to audit the execution of the "crontab" command with the following command:
$ auditctl -l | grep crontab
-a always,exit -S all -F path=/usr/bin/crontab -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged-crontab
If the command does not return an audit rule for "crontab" or any of the lines returned are commented out, this is a finding.
STIG ID: ALMA-09-048970 | SRG: SRG-OS-000037-GPOS-00015 | Severity: medium | CCI: | Vulnerability Id: V-269483
Without generating audit records specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Audit records can be generated from various components within the information system (e.g., module or policy filter).
When a user logs on, the auid is set to the uid of the account being authenticated. Daemons are not user sessions and have the loginuid set to -1. The auid representation is an unsigned 32-bit integer, which equals 4294967295. The audit system interprets -1, 4294967295, and "unset" in the same way.
The system call rules are loaded into a matching engine that intercepts each system call made by all programs on the system. Therefore, it is very important to use system call rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance can be helped, however, by combining system calls into one rule whenever possible.
Satisfies: SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000466-GPOS-00210, SRG-OS-000467-GPOS-00211, SRG-OS-000468-GPOS-00212
Configure AlmaLinux OS 9 to generate audit records upon successful/unsuccessful attempts to use the "rename", "unlink", "rmdir", "renameat", and "unlinkat" syscalls.
Add the following to the "/etc/audit/rules.d/audit.rules" file:
-a always,exit -F arch=b64 -S rename,unlink,unlinkat,renameat -F auid>=1000 -F auid!=unset -F key=delete
-a always,exit -F arch=b32 -S rename,unlink,unlinkat,renameat -F auid>=1000 -F auid!=unset -F key=delete
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Verify that AlmaLinux OS 9 is configured to audit the execution of the "rename", "unlink", "rmdir", "renameat", and "unlinkat" system calls with the following command:
$ auditctl -l | grep rename
-a always,exit -F arch=b32 -S unlink,rename,rmdir,unlinkat,renameat -F auid>=1000 -F auid!=unset -F key=delete
-a always,exit -F arch=b64 -S rename,rmdir,unlink,unlinkat,renameat -F auid>=1000 -F auid!=unset -F key=delete
If both the "b32" and "b64" audit rules are not defined for the "rename", "unlink", "rmdir", "renameat", and "unlinkat" system calls, or any of the lines returned are commented out, this is a finding.
STIG ID: ALMA-09-049080 | SRG: SRG-OS-000477-GPOS-00222 | Severity: medium | CCI: | Vulnerability Id: V-269484
Without generating audit records specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Audit records can be generated from various components within the information system (e.g., module or policy filter).
When a user logs on, the auid is set to the uid of the account being authenticated. Daemons are not user sessions and have the loginuid set to -1. The auid representation is an unsigned 32-bit integer, which equals 4294967295. The audit system interprets -1, 4294967295, and "unset" in the same way.
The system call rules are loaded into a matching engine that intercepts each system call made by all programs on the system. Therefore, it is very important to use system call rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance can be helped, however, by combining system calls into one rule whenever possible.
Satisfies: SRG-OS-000477-GPOS-00222, SRG-OS-000476-GPOS-00221, SRG-OS-000475-GPOS-00220
Configure AlmaLinux OS 9 to generate audit records for all account creations, modifications, disabling, and termination events that affect "/var/log/faillock".
Add the following to the "/etc/audit/rules.d/audit.rules" file:
-w /var/log/faillock -p wa -k logins
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Reboot the server so the changes to take effect.
Verify AlmaLinux OS 9 generates audit records for all account creations, modifications, disabling, and termination events that affect "/var/log/faillock" with the following command:
$ grep /var/log/faillock /etc/audit/audit.rules
-w /var/log/faillock -p wa -k logins
If the command does not return a line, or the line is commented out, this is a finding.
STIG ID: ALMA-09-049190 | SRG: SRG-OS-000037-GPOS-00015 | Severity: medium | CCI: | Vulnerability Id: V-269485
Without generating audit records specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Audit records can be generated from various components within the information system (e.g., module or policy filter).
When a user logs on, the auid is set to the uid of the account being authenticated. Daemons are not user sessions and have the loginuid set to -1. The auid representation is an unsigned 32-bit integer, which equals 4294967295. The audit system interprets -1, 4294967295, and "unset" in the same way.
The system call rules are loaded into a matching engine that intercepts each system call made by all programs on the system. Therefore, it is very important to use system call rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance can be helped, however, by combining system calls into one rule whenever possible.
Satisfies: SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215
Configure AlmaLinux OS 9 to generate audit records upon successful/unsuccessful attempts to use the "gpasswd" command.
Add the following to the "/etc/audit/rules.d/audit.rules" file:
-a always,exit -F path=/usr/bin/gpasswd -F perm=x -F auid>=1000 -F auid!=unset -k privileged-gpasswd
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Verify that AlmaLinux OS 9 is configured to audit the execution of the "gpasswd" command with the following command:
$ auditctl -l | grep gpasswd
-a always,exit -S all -F path=/usr/bin/gpasswd -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged-gpasswd
If the command does not return an audit rule for "gpasswd" or any of the lines returned are commented out, this is a finding.
STIG ID: ALMA-09-049300 | SRG: SRG-OS-000037-GPOS-00015 | Severity: medium | CCI: | Vulnerability Id: V-269486
Without generating audit records specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Audit records can be generated from various components within the information system (e.g., module or policy filter).
When a user logs on, the auid is set to the uid of the account being authenticated. Daemons are not user sessions and have the loginuid set to -1. The auid representation is an unsigned 32-bit integer, which equals 4294967295. The audit system interprets -1, 4294967295, and "unset" in the same way.
The system call rules are loaded into a matching engine that intercepts each system call made by all programs on the system. Therefore, it is very important to use system call rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance can be helped, however, by combining system calls into one rule whenever possible.
Satisfies: SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000471-GPOS-00216, SRG-OS-000477-GPOS-00222
Configure AlmaLinux OS 9 to generate audit records upon successful/unsuccessful attempts to use the "kmod" command.
Add the following lines to the "/etc/audit/rules.d/audit.rules" file:
-a always,exit -F path=/usr/bin/kmod -F perm=x -F auid>=1000 -F auid!=unset -k modules
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Verify that AlmaLinux OS 9 is configured to audit the execution of the "kmod" command with the following command:
$ auditctl -l | grep kmod
-a always,exit -F path=/usr/bin/kmod -F perm=x -F auid>=1000 -F auid!=unset -k modules
If the command does not return a line, or the line is commented out, this is a finding.
STIG ID: ALMA-09-049410 | SRG: SRG-OS-000037-GPOS-00015 | Severity: medium | CCI: | Vulnerability Id: V-269487
Without generating audit records specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Audit records can be generated from various components within the information system (e.g., module or policy filter).
When a user logs on, the auid is set to the uid of the account being authenticated. Daemons are not user sessions and have the loginuid set to -1. The auid representation is an unsigned 32-bit integer, which equals 4294967295. The audit system interprets -1, 4294967295, and "unset" in the same way.
The system call rules are loaded into a matching engine that intercepts each system call made by all programs on the system. Therefore, it is very important to use system call rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance can be helped, however, by combining system calls into one rule whenever possible.
Satisfies: SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215
Configure AlmaLinux OS 9 to generate audit records upon successful/unsuccessful attempts to use the "newgrp" command.
Add the following to the "/etc/audit/rules.d/audit.rules" file:
-a always,exit -F path=/usr/bin/newgrp -F perm=x -F auid>=1000 -F auid!=unset -k priv_cmd
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Verify that AlmaLinux OS 9 is configured to audit the execution of the "newgrp" command with the following command:
$ auditctl -l | grep newgrp
-a always,exit -S all -F path=/usr/bin/newgrp -F perm=x -F auid>=1000 -F auid!=unset -F key=priv_cmd
If the command does not return an audit rule for "newgrp" or any of the lines returned are commented out, this is a finding.
STIG ID: ALMA-09-049520 | SRG: SRG-OS-000037-GPOS-00015 | Severity: medium | CCI: | Vulnerability Id: V-269488
Without generating audit records specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Audit records can be generated from various components within the information system (e.g., module or policy filter).
When a user logs on, the auid is set to the uid of the account being authenticated. Daemons are not user sessions and have the loginuid set to -1. The auid representation is an unsigned 32-bit integer, which equals 4294967295. The audit system interprets -1, 4294967295, and "unset" in the same way.
The system call rules are loaded into a matching engine that intercepts each system call made by all programs on the system. Therefore, it is very important to use system call rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance can be helped, however, by combining system calls into one rule whenever possible.
Satisfies: SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215
Configure AlmaLinux OS 9 to generate audit records upon successful/unsuccessful attempts to use the "passwd" command.
Add the following to the "/etc/audit/rules.d/audit.rules" file:
-a always,exit -F path=/usr/bin/passwd -F perm=x -F auid>=1000 -F auid!=unset -k privileged-passwd
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Verify that AlmaLinux OS 9 is configured to audit the execution of the "passwd" command with the following command:
$ auditctl -l | grep passwd
-a always,exit -S all -F path=/usr/bin/passwd -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged-passwd
If the command does not return an audit rule for "passwd" or any of the lines returned are commented out, this is a finding.
STIG ID: ALMA-09-049630 | SRG: SRG-OS-000037-GPOS-00015 | Severity: medium | CCI: | Vulnerability Id: V-269489
Without generating audit records specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Audit records can be generated from various components within the information system (e.g., module or policy filter).
When a user logs on, the auid is set to the uid of the account being authenticated. Daemons are not user sessions and have the loginuid set to -1. The auid representation is an unsigned 32-bit integer, which equals 4294967295. The audit system interprets -1, 4294967295, and "unset" in the same way.
The system call rules are loaded into a matching engine that intercepts each system call made by all programs on the system. Therefore, it is very important to use system call rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance can be helped, however, by combining system calls into one rule whenever possible.
Satisfies: SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215
Configure AlmaLinux OS 9 to generate audit records upon successful/unsuccessful attempts to use the "postdrop" command.
Add the following to the "/etc/audit/rules.d/audit.rules" file:
-a always,exit -F path=/usr/sbin/postdrop -F perm=x -F auid>=1000 -F auid!=unset -k privileged-unix-update
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Verify that AlmaLinux OS 9 is configured to audit the execution of the "postdrop" command with the following command:
$ auditctl -l | grep postdrop
-a always,exit -S all -F path=/usr/sbin/postdrop -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged-unix-update
If the command does not return an audit rule for "postdrop" or any of the lines returned are commented out, this is a finding.
STIG ID: ALMA-09-049740 | SRG: SRG-OS-000037-GPOS-00015 | Severity: medium | CCI: | Vulnerability Id: V-269490
Without generating audit records specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Audit records can be generated from various components within the information system (e.g., module or policy filter).
When a user logs on, the auid is set to the uid of the account being authenticated. Daemons are not user sessions and have the loginuid set to -1. The auid representation is an unsigned 32-bit integer, which equals 4294967295. The audit system interprets -1, 4294967295, and "unset" in the same way.
The system call rules are loaded into a matching engine that intercepts each system call made by all programs on the system. Therefore, it is very important to use system call rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance can be helped, however, by combining system calls into one rule whenever possible.
Satisfies: SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215
Configure AlmaLinux OS 9 to generate audit records upon successful/unsuccessful attempts to use the "postqueue" command.
Add the following to the "/etc/audit/rules.d/audit.rules" file:
-a always,exit -F path=/usr/sbin/postqueue -F perm=x -F auid>=1000 -F auid!=unset -k privileged-unix-update
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Verify that AlmaLinux OS 9 is configured to audit the execution of the "postqueue" command with the following command:
$ auditctl -l | grep postqueue
-a always,exit -S all -F path=/usr/sbin/postqueue -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged-unix-update
If the command does not return an audit rule for "postqueue" or any of the lines returned are commented out, this is a finding.
STIG ID: ALMA-09-049850 | SRG: SRG-OS-000037-GPOS-00015 | Severity: medium | CCI: | Vulnerability Id: V-269491
Without generating audit record specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Audit records can be generated from various components within the information system (e.g., module or policy filter).
When a user logs on, the auid is set to the uid of the account being authenticated. Daemons are not user sessions and have the loginuid set to -1. The auid representation is an unsigned 32-bit integer, which equals 4294967295. The audit system interprets -1, 4294967295, and "unset" in the same way.
The system call rules are loaded into a matching engine that intercepts each system call made by all programs on the system. Therefore, it is very important to use system call rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance can be helped, however, by combining system calls into one rule whenever possible.
Satisfies: SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000064-GPOS-00033, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000466-GPOS-00210
Configure AlmaLinux OS 9 to generate audit records upon successful/unsuccessful attempts to use the "su" command.
Add the following to the "/etc/audit/rules.d/audit.rules" file:
-a always,exit -S all -F path=/usr/bin/su -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged-priv_change
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Verify that AlmaLinux OS 9 is configured to audit the execution of the "su" command with the following command:
$ grep -w path=/usr/bin/su /etc/audit/audit.rules
-a always,exit -S all -F path=/usr/bin/su -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged-priv_change
If the command does not return a matching line, this is a finding.
STIG ID: ALMA-09-049960 | SRG: SRG-OS-000037-GPOS-00015 | Severity: medium | CCI: | Vulnerability Id: V-269492
Without generating audit record specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Audit records can be generated from various components within the information system (e.g., module or policy filter).
When a user logs on, the auid is set to the uid of the account being authenticated. Daemons are not user sessions and have the loginuid set to -1. The auid representation is an unsigned 32-bit integer, which equals 4294967295. The audit system interprets -1, 4294967295, and "unset" in the same way.
The system call rules are loaded into a matching engine that intercepts each system call made by all programs on the system. Therefore, it is very important to use system call rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance can be helped, however, by combining system calls into one rule whenever possible.
Satisfies: SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000064-GPOS-00033, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000466-GPOS-00210
Configure AlmaLinux OS 9 to generate audit records upon successful/unsuccessful attempts to use the "sudo" command.
Add the following to the "/etc/audit/rules.d/audit.rules" file:
-a always,exit -S all -F path=/usr/bin/sudo -F perm=x -F auid>=1000 -F auid!=unset -F key=priv_cmd
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Verify that AlmaLinux OS 9 is configured to audit the execution of the "sudo" command.
$ grep -w path=/usr/bin/sudo /etc/audit/audit.rules
-a always,exit -S all -F path=/usr/bin/sudo -F perm=x -F auid>=1000 -F auid!=unset -F key=priv_cmd
If the command does not return a matching line, this is a finding.
STIG ID: ALMA-09-050070 | SRG: SRG-OS-000037-GPOS-00015 | Severity: medium | CCI: | Vulnerability Id: V-269493
Without generating audit records specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Audit records can be generated from various components within the information system (e.g., module or policy filter).
When a user logs on, the auid is set to the uid of the account being authenticated. Daemons are not user sessions and have the loginuid set to -1. The auid representation is an unsigned 32-bit integer, which equals 4294967295. The audit system interprets -1, 4294967295, and "unset" in the same way.
The system call rules are loaded into a matching engine that intercepts each system call made by all programs on the system. Therefore, it is very important to use system call rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance can be helped, however, by combining system calls into one rule whenever possible.
Satisfies: SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000463-GPOS-00207, SRG-OS-000465-GPOS-00209
Configure AlmaLinux OS 9 to generate audit records upon successful/unsuccessful attempts to use the "semanage" command.
Add the following to the "/etc/audit/rules.d/audit.rules" file:
-a always,exit -F path=/usr/sbin/semanage -F perm=x -F auid>=1000 -F auid!=unset -k privileged-unix-update"
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Verify that AlmaLinux OS 9 is configured to audit the execution of the "semanage" command with the following command:
$ auditctl -l | grep semanage
-a always,exit -S all -F path=/usr/sbin/semanage -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged-unix-update
If the command does not return an audit rule for "semanage" or any of the lines returned are commented out, this is a finding.
STIG ID: ALMA-09-050180 | SRG: SRG-OS-000037-GPOS-00015 | Severity: medium | CCI: | Vulnerability Id: V-269494
Without generating audit records specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Audit records can be generated from various components within the information system (e.g., module or policy filter).
When a user logs on, the auid is set to the uid of the account being authenticated. Daemons are not user sessions and have the loginuid set to -1. The auid representation is an unsigned 32-bit integer, which equals 4294967295. The audit system interprets -1, 4294967295, and "unset" in the same way.
The system call rules are loaded into a matching engine that intercepts each system call made by all programs on the system. Therefore, it is very important to use system call rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance can be helped, however, by combining system calls into one rule whenever possible.
Satisfies: SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215
Configure AlmaLinux OS 9 to generate audit records upon successful/unsuccessful attempts to use the "setfacl" command.
Add the following to the "/etc/audit/rules.d/audit.rules" file:
-a always,exit -F path=/usr/bin/setfacl -F perm=x -F auid>=1000 -F auid!=unset -k perm_mod
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Verify that AlmaLinux OS 9 is configured to audit the execution of the "setfacl" command with the following command:
$ auditctl -l | grep setfacl
-a always,exit -S all -F path=/usr/bin/setfacl -F perm=x -F auid>=1000 -F auid!=unset -F key=perm_mod
If the command does not return an audit rule for "setfacl" or any of the lines returned are commented out, this is a finding.
STIG ID: ALMA-09-050290 | SRG: SRG-OS-000037-GPOS-00015 | Severity: medium | CCI: | Vulnerability Id: V-269495
Without generating audit records specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Audit records can be generated from various components within the information system (e.g., module or policy filter).
When a user logs on, the auid is set to the uid of the account being authenticated. Daemons are not user sessions and have the loginuid set to -1. The auid representation is an unsigned 32-bit integer, which equals 4294967295. The audit system interprets -1, 4294967295, and "unset" in the same way.
The system call rules are loaded into a matching engine that intercepts each system call made by all programs on the system. Therefore, it is very important to use system call rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance can be helped, however, by combining system calls into one rule whenever possible.
Satisfies: SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000463-GPOS-00207, SRG-OS-000465-GPOS-00209
Configure AlmaLinux OS 9 to generate audit records upon successful/unsuccessful attempts to use the "setfiles" command.
Add the following to the "/etc/audit/rules.d/audit.rules" file:
-a always,exit -F path=/usr/sbin/setfiles -F perm=x -F auid>=1000 -F auid!=unset -k privileged-unix-update
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Verify that AlmaLinux OS 9 is configured to audit the execution of the "setfiles" command with the following command:
$ auditctl -l | grep setfiles
-a always,exit -F path=/usr/sbin/setfiles -F perm=x -F auid>=1000 -F auid!=unset -k privileged-unix-update
If the command does not return an audit rule for "setfiles" or any of the lines returned are commented out, this is a finding.
STIG ID: ALMA-09-050400 | SRG: SRG-OS-000037-GPOS-00015 | Severity: medium | CCI: | Vulnerability Id: V-269496
Without generating audit records specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Audit records can be generated from various components within the information system (e.g., module or policy filter).
When a user logs on, the auid is set to the uid of the account being authenticated. Daemons are not user sessions and have the loginuid set to -1. The auid representation is an unsigned 32-bit integer, which equals 4294967295. The audit system interprets -1, 4294967295, and "unset" in the same way.
The system call rules are loaded into a matching engine that intercepts each system call made by all programs on the system. Therefore, it is very important to use system call rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance can be helped, however, by combining system calls into one rule whenever possible.
Satisfies: SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000463-GPOS-00207, SRG-OS-000465-GPOS-00209
Configure AlmaLinux OS 9 to generate audit records upon successful/unsuccessful attempts to use the "setsebool" command.
Add the following to the "/etc/audit/rules.d/audit.rules" file:
-a always,exit -F path=/usr/sbin/setsebool -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Verify that AlmaLinux OS 9 is configured to audit the execution of the "setsebool" command with the following command:
$ auditctl -l | grep setsebool
-a always,exit -S all -F path=/usr/sbin/setsebool -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged
If the command does not return an audit rule for "setsebool" or any of the lines returned are commented out, this is a finding.
STIG ID: ALMA-09-050510 | SRG: SRG-OS-000037-GPOS-00015 | Severity: medium | CCI: | Vulnerability Id: V-269497
Without generating audit records specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Audit records can be generated from various components within the information system (e.g., module or policy filter).
When a user logs on, the auid is set to the uid of the account being authenticated. Daemons are not user sessions and have the loginuid set to -1. The auid representation is an unsigned 32-bit integer, which equals 4294967295. The audit system interprets -1, 4294967295, and "unset" in the same way.
The system call rules are loaded into a matching engine that intercepts each system call made by all programs on the system. Therefore, it is very important to use system call rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance can be helped, however, by combining system calls into one rule whenever possible.
Satisfies: SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215
Configure AlmaLinux OS 9 to generate audit records upon successful/unsuccessful attempts to use the "ssh-agent" command.
Add the following to the "/etc/audit/rules.d/audit.rules" file:
-a always,exit -F path=/usr/bin/ssh-agent -F perm=x -F auid>=1000 -F auid!=unset -k privileged-ssh
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Verify that AlmaLinux OS 9 is configured to audit the execution of the "ssh-agent" command with the following command:
$ auditctl -l | grep ssh-agent
-a always,exit -S all -F path=/usr/bin/ssh-agent -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged-ssh
If the command does not return an audit rule for "ssh-agent" or any of the lines returned are commented out, this is a finding.
STIG ID: ALMA-09-050620 | SRG: SRG-OS-000037-GPOS-00015 | Severity: medium | CCI: | Vulnerability Id: V-269498
Without generating audit records specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Audit records can be generated from various components within the information system (e.g., module or policy filter).
When a user logs on, the auid is set to the uid of the account being authenticated. Daemons are not user sessions and have the loginuid set to -1. The auid representation is an unsigned 32-bit integer, which equals 4294967295. The audit system interprets -1, 4294967295, and "unset" in the same way.
The system call rules are loaded into a matching engine that intercepts each system call made by all programs on the system. Therefore, it is very important to use system call rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance can be helped, however, by combining system calls into one rule whenever possible.
Satisfies: SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215
Configure AlmaLinux OS 9 to generate audit records upon successful/unsuccessful attempts to use the "ssh-keysign" command.
Add the following to the "/etc/audit/rules.d/audit.rules" file:
-a always,exit -F path=/usr/bin/ssh-keysign -F perm=x -F auid>=1000 -F auid!=unset -k privileged-ssh
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Verify that AlmaLinux OS 9 is configured to audit the execution of the "ssh-keysign" command with the following command:
$ auditctl -l | grep ssh-keysign
-a always,exit -S all -F path=/usr/bin/ssh-keysign -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged-ssh
If the command does not return an audit rule for "ssh-keysign" or any of the lines returned are commented out, this is a finding.
STIG ID: ALMA-09-050730 | SRG: SRG-OS-000037-GPOS-00015 | Severity: medium | CCI: | Vulnerability Id: V-269499
Without generating audit records specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Audit records can be generated from various components within the information system (e.g., module or policy filter).
When a user logs on, the auid is set to the uid of the account being authenticated. Daemons are not user sessions and have the loginuid set to -1. The auid representation is an unsigned 32-bit integer, which equals 4294967295. The audit system interprets -1, 4294967295, and "unset" in the same way.
The system call rules are loaded into a matching engine that intercepts each system call made by all programs on the system. Therefore, it is very important to use system call rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance can be helped, however, by combining system calls into one rule whenever possible.
Satisfies: SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215
Configure AlmaLinux OS 9 to generate audit records upon successful/unsuccessful attempts to use the "sudoedit" command.
Add the following to the "/etc/audit/rules.d/audit.rules" file:
-a always,exit -F path=/usr/bin/sudoedit -F perm=x -F auid>=1000 -F auid!=unset -k priv_cmd
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Verify that AlmaLinux OS 9 is configured to audit the execution of the "sudoedit" command with the following command:
$ auditctl -l | grep sudoedit
-a always,exit -S all -F path=/usr/bin/sudoedit -F perm=x -F auid>=1000 -F auid!=unset -F key=priv_cmd
If the command does not return an audit rule for "sudoedit" or any of the lines returned are commented out, this is a finding.
STIG ID: ALMA-09-050840 | SRG: SRG-OS-000037-GPOS-00015 | Severity: medium | CCI: | Vulnerability Id: V-269500
Without generating audit records specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Audit records can be generated from various components within the information system (e.g., module or policy filter).
When a user logs on, the auid is set to the uid of the account being authenticated. Daemons are not user sessions and have the loginuid set to -1. The auid representation is an unsigned 32-bit integer, which equals 4294967295. The audit system interprets -1, 4294967295, and "unset" in the same way.
The system call rules are loaded into a matching engine that intercepts each system call made by all programs on the system. Therefore, it is very important to use system call rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance can be helped, however, by combining system calls into one rule whenever possible.
Satisfies: SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215
Configure AlmaLinux OS 9 to generate audit records upon successful/unsuccessful attempts to use the "pam_timestamp_check" command.
Add the following to the "/etc/audit/rules.d/audit.rules" file:
-a always,exit -F path=/usr/sbin/pam_timestamp_check -F perm=x -F auid>=1000 -F auid!=unset -k privileged-pam_timestamp_check
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Verify that AlmaLinux OS 9 is configured to audit the execution of the "pam_timestamp_check" command with the following command:
$ auditctl -l | grep timestamp
-a always,exit -S all -F path=/usr/sbin/pam_timestamp_check -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged-pam_timestamp_check
If the command does not return an audit rule for "pam_timestamp_check" or any of the lines returned are commented out, this is a finding.
STIG ID: ALMA-09-050950 | SRG: SRG-OS-000037-GPOS-00015 | Severity: medium | CCI: | Vulnerability Id: V-269501
Without generating audit records specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Audit records can be generated from various components within the information system (e.g., module or policy filter).
When a user logs on, the auid is set to the uid of the account being authenticated. Daemons are not user sessions and have the loginuid set to -1. The auid representation is an unsigned 32-bit integer, which equals 4294967295. The audit system interprets -1, 4294967295, and "unset" in the same way.
The system call rules are loaded into a matching engine that intercepts each system call made by all programs on the system. Therefore, it is very important to use system call rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance can be helped, however, by combining system calls into one rule whenever possible.
Satisfies: SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215
Configure AlmaLinux OS 9 to generate audit records upon successful/unsuccessful attempts to use the "unix_chkpwd" command.
Add the following to the "/etc/audit/rules.d/audit.rules" file:
-a always,exit -F path=/usr/sbin/unix_chkpwd -F perm=x -F auid>=1000 -F auid!=unset -k privileged-unix-update
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Verify that AlmaLinux OS 9 is configured to audit the execution of the "unix_chkpwd" command with the following command:
$ auditctl -l | grep unix_chkpwd
-a always,exit -S all -F path=/usr/sbin/unix_chkpwd -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged-unix-update
If the command does not return an audit rule for "unix_chkpwd" or any of the lines returned are commented out, this is a finding.
STIG ID: ALMA-09-051060 | SRG: SRG-OS-000037-GPOS-00015 | Severity: medium | CCI: | Vulnerability Id: V-269502
Without generating audit records specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Audit records can be generated from various components within the information system (e.g., module or policy filter).
When a user logs on, the auid is set to the uid of the account being authenticated. Daemons are not user sessions and have the loginuid set to -1. The auid representation is an unsigned 32-bit integer, which equals 4294967295. The audit system interprets -1, 4294967295, and "unset" in the same way.
The system call rules are loaded into a matching engine that intercepts each system call made by all programs on the system. Therefore, it is very important to use system call rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance can be helped, however, by combining system calls into one rule whenever possible.
Satisfies: SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000064-GPOS-00033, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215
Configure AlmaLinux OS 9 to generate audit records upon successful/unsuccessful attempts to use the "unix_update" command.
Add the following to the "/etc/audit/rules.d/audit.rules" file:
-a always,exit -F path=/usr/sbin/unix_update -F perm=x -F auid>=1000 -F auid!=unset -k privileged-unix-update
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Verify that AlmaLinux OS 9 is configured to audit the execution of the "unix_update" command with the following command:
$ grep /unix_update /etc/audit/audit.rules
-a always,exit -S all -F path=/usr/sbin/unix_update -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged-unix-update
If the command does not return an audit rule for "unix_update" or any of the lines returned are commented out, this is a finding.
STIG ID: ALMA-09-051170 | SRG: SRG-OS-000037-GPOS-00015 | Severity: medium | CCI: | Vulnerability Id: V-269503
Without generating audit records specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Audit records can be generated from various components within the information system (e.g., module or policy filter).
When a user logs on, the auid is set to the uid of the account being authenticated. Daemons are not user sessions and have the loginuid set to -1. The auid representation is an unsigned 32-bit integer, which equals 4294967295. The audit system interprets -1, 4294967295, and "unset" in the same way.
The system call rules are loaded into a matching engine that intercepts each system call made by all programs on the system. Therefore, it is very important to use system call rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance can be helped, however, by combining system calls into one rule whenever possible.
Satisfies: SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215
Configure AlmaLinux OS 9 to generate audit records upon successful/unsuccessful attempts to use the "userhelper" command.
Add the following to the "/etc/audit/rules.d/audit.rules" file:
-a always,exit -F path=/usr/sbin/userhelper -F perm=x -F auid>=1000 -F auid!=unset -k privileged-unix-update
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Verify that AlmaLinux OS 9 is configured to audit the execution of the "userhelper" command with the following command:
$ auditctl -l | grep userhelper
-a always,exit -S all -F path=/usr/sbin/userhelper -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged-unix-update
If the command does not return an audit rule for "userhelper" or any of the lines returned are commented out, this is a finding.
STIG ID: ALMA-09-051280 | SRG: SRG-OS-000037-GPOS-00015 | Severity: medium | CCI: | Vulnerability Id: V-269504
Without generating audit records specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Audit records can be generated from various components within the information system (e.g., module or policy filter).
When a user logs on, the auid is set to the uid of the account being authenticated. Daemons are not user sessions and have the loginuid set to -1. The auid representation is an unsigned 32-bit integer, which equals 4294967295. The audit system interprets -1, 4294967295, and "unset" in the same way.
The system call rules are loaded into a matching engine that intercepts each system call made by all programs on the system. Therefore, it is very important to use system call rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance can be helped, however, by combining system calls into one rule whenever possible.
Satisfies: SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000466-GPOS-00210
Configure AlmaLinux OS 9 to generate audit records upon successful/unsuccessful attempts to use the "usermod" command.
Add the following to the "/etc/audit/rules.d/audit.rules" file:
-a always,exit -F path=/usr/sbin/usermod -F perm=x -F auid>=1000 -F auid!=unset -k privileged-usermod
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Verify that AlmaLinux OS 9 is configured to audit the execution of the "usermod" command with the following command:
$ auditctl -l | grep usermod
-a always,exit -S all -F path=/usr/sbin/usermod -F perm=x -F auid>=1000 -F auid!=unset -F key=privileged-usermod
If the command does not return an audit rule for "usermod" or any of the lines returned are commented out, this is a finding.
STIG ID: ALMA-09-051390 | SRG: SRG-OS-000037-GPOS-00015 | Severity: medium | CCI: | Vulnerability Id: V-269505
Without generating audit records specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
Audit records can be generated from various components within the information system (e.g., module or policy filter).
When a user logs on, the auid is set to the uid of the account being authenticated. Daemons are not user sessions and have the loginuid set to -1. The auid representation is an unsigned 32-bit integer, which equals 4294967295. The audit system interprets -1, 4294967295, and "unset" in the same way.
The system call rules are loaded into a matching engine that intercepts each system call made by all programs on the system. Therefore, it is very important to use system call rules only when absolutely necessary since these affect performance. The more rules, the bigger the performance hit. The performance can be helped, however, by combining system calls into one rule whenever possible.
Satisfies: SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000458-GPOS-00203, SRG-OS-000462-GPOS-00206, SRG-OS-000463-GPOS-00207, SRG-OS-000471-GPOS-00215, SRG-OS-000474-GPOS-00219, SRG-OS-000466-GPOS-00210, SRG-OS-000064-GPOS-00033
Configure AlmaLinux OS 9 to generate audit records upon successful/unsuccessful attempts to use the "setxattr", "fsetxattr", "lsetxattr", "removexattr", "fremovexattr", and "lremovexattr" syscalls.
Add the following to the "/etc/audit/rules.d/audit.rules" file:
-a always,exit -F arch=b32 -S setxattr,fsetxattr,lsetxattr,removexattr,fremovexattr,lremovexattr -F auid>=1000 -F auid!=unset -k perm_mod
-a always,exit -F arch=b64 -S setxattr,fsetxattr,lsetxattr,removexattr,fremovexattr,lremovexattr -F auid>=1000 -F auid!=unset -k perm_mod
-a always,exit -F arch=b32 -S setxattr,fsetxattr,lsetxattr,removexattr,fremovexattr,lremovexattr -F auid=0 -k perm_mod
-a always,exit -F arch=b64 -S setxattr,fsetxattr,lsetxattr,removexattr,fremovexattr,lremovexattr -F auid=0 -k perm_mod
Merge the rules into /etc/audit/audit.rules:
$ augenrules --load
Verify that AlmaLinux OS 9 is configured to audit the execution of the "setxattr", "fsetxattr", "lsetxattr", "removexattr", "fremovexattr", and "lremovexattr" system calls with the following command:
$ auditctl -l | grep xattr
-a always,exit -F arch=b32 -S setxattr,lsetxattr,fsetxattr,removexattr,lremovexattr,fremovexattr -F auid>=1000 -F auid!=unset -F key=perm_mod
-a always,exit -F arch=b64 -S setxattr,lsetxattr,fsetxattr,removexattr,lremovexattr,fremovexattr -F auid>=1000 -F auid!=unset -F key=perm_mod
-a always,exit -F arch=b32 -S setxattr,lsetxattr,fsetxattr,removexattr,lremovexattr,fremovexattr -F auid=0 -F key=perm_mod
-a always,exit -F arch=b64 -S setxattr,lsetxattr,fsetxattr,removexattr,lremovexattr,fremovexattr -F auid=0 -F key=perm_mod
If both the "b32" and "b64" audit rules are not defined for the "setxattr", "fsetxattr", "lsetxattr", "removexattr", "fremovexattr", and "lremovexattr" system calls, or any of the lines returned are commented out, this is a finding.
STIG ID: ALMA-09-051830 | SRG: SRG-OS-000341-GPOS-00132 | Severity: low | CCI: | Vulnerability Id: V-269506
Without the capability to generate audit records, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one.
If auditing is enabled late in the startup process, the actions of some startup processes may not be audited. Some audit systems also maintain state information only available if auditing is enabled before a given process is created.
Audit records can be generated from various components within the information system (e.g., module or policy filter).
Allocating an audit_backlog_limit of sufficient size is critical in maintaining a stable boot process. With an insufficient limit allocated, the system is susceptible to boot failures and crashes.
Configure AlmaLinux OS 9 to allocate sufficient audit_backlog_limit to capture processes that start prior to the audit daemon with the following command:
$ grubby --update-kernel=ALL --args=audit_backlog_limit=8192
Verify AlmaLinux OS 9 allocates a sufficient audit_backlog_limit to capture processes that start prior to the audit daemon with the following command:
$ grubby --info=ALL | grep args | grep -v 'audit_backlog_limit=8192'
If the command returns any outputs, and audit_backlog_limit is less than "8192", this is a finding.
STIG ID: ALMA-09-051940 | SRG: SRG-OS-000341-GPOS-00132 | Severity: low | CCI: | Vulnerability Id: V-269507
Placing "/var/log/audit" in its own partition enables better separation between audit files and other system files, and helps ensure that auditing cannot be halted due to the partition running out of space.
Migrate the system audit data path onto a separate file system.
Verify that a separate file system/partition has been created for the system audit data path with the following command:
Note: /var/log/audit is used as the example as it is a common location.
$ findmnt /var/log/audit
TARGET SOURCE FSTYPE OPTIONS
/var/log/audit /dev/mapper/luks-29b74747-2f82-4472-82f5-0b5eb763effc xfs rw,nosuid,nodev,noexec,relatime,seclabel,attr2,inode64,logbufs=8,logbsize=32k,noquota
If no line is returned, this is a finding.
STIG ID: ALMA-09-052050 | SRG: SRG-OS-000341-GPOS-00132 | Severity: medium | CCI: | Vulnerability Id: V-269508
To ensure AlmaLinux OS 9 systems have a sufficient storage capacity in which to write the audit logs, AlmaLinux OS 9 needs to be able to allocate audit record storage capacity.
The task of allocating audit record storage capacity is usually performed during initial installation of AlmaLinux OS 9.
Allocate enough storage capacity for at least one week of audit records when audit records are not immediately sent to a central audit record storage facility.
If audit records are stored on a partition made specifically for audit records, resize the partition with sufficient space to contain one week of audit records.
If audit records are not stored on a partition made specifically for audit records, a new partition with sufficient space will need be to be created.
Verify AlmaLinux OS 9 allocates audit record storage capacity to store at least one week of audit records when audit records are not immediately sent to a central audit record storage facility.
Note: The partition size needed to capture a week of audit records is based on the activity level of the system and the total storage capacity available. Typically 10GB of storage space for audit records should be sufficient.
Determine which partition the audit records are being written to with the following command:
$ grep -w log_file /etc/audit/auditd.conf
log_file = /var/log/audit/audit.log
Check the size of the partition that audit records are written to with the following command and verify whether it is sufficiently large:
$ df -h /var/log/audit/
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/luks-29b74747-2f82-4472-82f5-0b8eb763effc 1002M 77M 926M 8% /var/log/audit
If the audit record partition is not allocated for sufficient storage capacity, this is a finding.
STIG ID: ALMA-09-052160 | SRG: SRG-OS-000479-GPOS-00224 | Severity: medium | CCI: | Vulnerability Id: V-269509
"audispd-plugins" provides plugins for the real-time interface to the audit subsystem, "audispd". These plugins can do things like relay events to remote machines or analyze events for suspicious behavior.
The audispd-plugins package can be installed with the following command:
$ dnf install audispd-plugins
Verify that AlmaLinux OS 9 has the audispd-plugins package for installed with the following command:
$ dnf list --installed audispd-plugins
audispd-plugins.x86_64 3.0.7-103.el9 @anaconda
If the "audispd-plugins" package is not installed, this is a finding.
STIG ID: ALMA-09-052270 | SRG: SRG-OS-000479-GPOS-00224 | Severity: medium | CCI: | Vulnerability Id: V-269510
When audit logs are not labelled before they are sent to a central log server, the audit data will not be able to be analyzed and tied back to the correct system.
Edit the /etc/audit/auditd.conf file and add or update the "name_format" option:
name_format = HOSTNAME
The audit daemon must be restarted for changes to take effect.
Verify that AlmaLinux OS 9 Audit Daemon is configured to label all offloaded audit logs, with the following command:
$ grep name_format /etc/audit/auditd.conf
name_format = HOSTNAME
If the "name_format" option is not "HOSTNAME", "fqd", or "numeric", or the line is commented out, this is a finding.
STIG ID: ALMA-09-052380 | SRG: SRG-OS-000479-GPOS-00224 | Severity: medium | CCI: | Vulnerability Id: V-269511
The audit system should have an action setup in the event the internal event queue becomes full so that no data is lost.
Edit the /etc/audit/auditd.conf file and add or update the "overflow_action" option:
overflow_action = SYSLOG
The audit daemon must be restarted for changes to take effect.
Verify that AlmaLinux OS 9 audit system is configured to take an appropriate action when the internal event queue is full:
$ grep -i overflow_action /etc/audit/auditd.conf
overflow_action = SYSLOG
If the value of the "overflow_action" option is not set to "SYSLOG", "SINGLE", "HALT" or the line is commented out, ask the system administrator (SA) to indicate how the audit logs are offloaded to a different system or media.
If there is no evidence that the transfer of the audit logs being offloaded to another system or media takes appropriate action if the internal event queue becomes full, this is a finding.
STIG ID: ALMA-09-052490 | SRG: SRG-OS-000479-GPOS-00224 | Severity: medium | CCI: | Vulnerability Id: V-269512
The auditd service does not include the ability to send audit records to a centralized server for management directly.
However, it can use a plug-in for audit event multiplexor (audispd) to pass audit records to the local syslog server.
Edit the /etc/audit/plugins.d/syslog.conf file and add or update the "active" option:
active = yes
The audit daemon must be restarted for changes to take effect.
Verify AlmaLinux OS 9 is configured use the audisp-remote syslog service with the following command:
$ grep active /etc/audit/plugins.d/syslog.conf
active = yes
If the "active" keyword does not have a value of "yes", the line is commented out, or the line is missing, this is a finding.
STIG ID: ALMA-09-052600 | SRG: SRG-OS-000479-GPOS-00224 | Severity: medium | CCI: | Vulnerability Id: V-269513
Information stored in one location is vulnerable to accidental or incidental deletion or alteration.
Off-loading is a common process in information systems with limited audit storage capacity.
Configure AlmaLinux OS 9 to authenticate the remote logging server for offloading audit logs by setting the following option in "/etc/rsyslog.conf" or "/etc/rsyslog.d/[customfile].conf":
$ActionSendStreamDriverAuthMode x509/name
Verify AlmaLinux OS 9 authenticates the remote logging server for offloading audit logs with the following command:
$ grep -i '$ActionSendStreamDriverAuthMode' /etc/rsyslog.conf /etc/rsyslog.d/*.conf
/etc/rsyslog.d/stig.conf:$ActionSendStreamDriverAuthMode x509/name
If the value of the "$ActionSendStreamDriverAuthMode" option is not set to "x509/name" or the line is commented out, ask the system administrator (SA) to indicate how the audit logs are offloaded to a different system or media.
If there is no evidence that the transfer of the audit logs being offloaded to another system or media is encrypted, this is a finding.
STIG ID: ALMA-09-052710 | SRG: SRG-OS-000479-GPOS-00224 | Severity: medium | CCI: | Vulnerability Id: V-269514
Information stored in one location is vulnerable to accidental or incidental deletion or alteration.
Off-loading is a common process in information systems with limited audit storage capacity.
Configure AlmaLinux OS 9 to encrypt offloaded audit records via rsyslog by setting the following options in "/etc/rsyslog.conf" or "/etc/rsyslog.d/[customfile].conf":
$ActionSendStreamDriverMode 1
Verify AlmaLinux OS 9 encrypts audit records offloaded onto a different system or media from the system being audited via rsyslog with the following command:
$ grep -i '$ActionSendStreamDriverMode' /etc/rsyslog.conf /etc/rsyslog.d/*.conf
/etc/rsyslog.d/stig.conf:$ActionSendStreamDriverMode 1
If the value of the "$ActionSendStreamDriverMode" option is not set to "1" or the line is commented out, this is a finding.
STIG ID: ALMA-09-052820 | SRG: SRG-OS-000479-GPOS-00224 | Severity: medium | CCI: | Vulnerability Id: V-269515
Information stored in one location is vulnerable to accidental or incidental deletion or alteration.
Off-loading is a common process in information systems with limited audit storage capacity.
Configure AlmaLinux OS 9 to use the gtls driver to encrypt offloaded audit records by setting the following options in "/etc/rsyslog.conf" or "/etc/rsyslog.d/[customfile].conf":
$DefaultNetstreamDriver gtls
Verify AlmaLinux OS 9 uses the gtls driver to encrypt audit records offloaded onto a different system or media from the system being audited with the following command:
$ grep -i '$DefaultNetstreamDriver' /etc/rsyslog.conf /etc/rsyslog.d/*.conf
/etc/rsyslog.d/stig.conf:$DefaultNetstreamDriver gtls
If the value of the "$DefaultNetstreamDriver" option is not set to "gtls" or the line is commented out, this is a finding.
STIG ID: ALMA-09-052930 | SRG: SRG-OS-000342-GPOS-00133 | Severity: medium | CCI: | Vulnerability Id: V-269516
rsyslogd is a system utility providing support for message logging. Support for both internet and Unix domain sockets enables this utility to support both local and remote logging. Couple this utility with "gnutls" (which is a secure communications library implementing the SSL, TLS, and DTLS protocols), to create a method to securely encrypt and offload auditing.
The rsyslog package can be installed with the following command:
$ dnf install rsyslog
Verify that AlmaLinux OS 9 has the rsyslog package installed with the following command:
$ dnf list --installed rsyslog
rsyslog.x86_64 8.2102.0-113.el9_2.1 @appstream
If the "rsyslog" package is not installed, this is a finding.
STIG ID: ALMA-09-053040 | SRG: SRG-OS-000342-GPOS-00133 | Severity: low | CCI: | Vulnerability Id: V-269517
Information stored in one location is vulnerable to accidental or incidental deletion or alteration.
Off-loading is a common process in information systems with limited audit storage capacity.
Configure AlmaLinux OS 9 to offload audit records onto a different system or media from the system being audited via TCP using rsyslog by specifying the remote logging server in "/etc/rsyslog.conf"" or "/etc/rsyslog.d/[customfile].conf" with the name or IP address of the log aggregation server.
*.* @@[server]:[port]"
Verify that AlmaLinux OS 9 audit system offloads audit records onto a different system or media from the system being audited via rsyslog using TCP with the following command:
$ grep @@ /etc/rsyslog.conf /etc/rsyslog.d/*.conf
/etc/rsyslog.d/stig.conf:*.* @@loghost.example.com"
If a remote server is not configured, or the line is commented out, ask the system administrator (SA) to indicate how the audit logs are offloaded to a different system or media.
If there is no evidence that the audit logs are being offloaded to another system or media, this is a finding.
STIG ID: ALMA-09-053150 | SRG: SRG-OS-000342-GPOS-00133 | Severity: medium | CCI: | Vulnerability Id: V-269518
The "rsyslog" service must be running to provide logging services, which are essential to system administration.
To enable the rsyslog service, run the following command:
$ systemctl enable --now rsyslog
Verify that "rsyslog" is active with the following command:
$ systemctl status rsyslog
rsyslog.service - System Logging Service
Loaded: loaded (/usr/lib/systemd/system/rsyslog.service; enabled; preset: enabled)
Active: active (running) since Mon 2024-03-04 10:10:08 UTC; 3h 20min ago
If the rsyslog service is not active, this is a finding.
STIG ID: ALMA-09-053260 | SRG: SRG-OS-000343-GPOS-00134 | Severity: medium | CCI: | Vulnerability Id: V-269519
If security personnel are not notified immediately when storage volume reaches 75 percent usage, they are unable to plan for audit record storage capacity expansion.
Configure AlmaLinux OS 9 to initiate an action when allocated audit record storage volume reaches 95 percent of the repository maximum audit record storage capacity by adding/modifying the following line in the /etc/audit/auditd.conf file.
admin_space_left = 5%
Verify AlmaLinux OS 9 takes action when allocated audit record storage volume reaches 95 percent of the repository maximum audit record storage capacity with the following command:
$ grep -w admin_space_left /etc/audit/auditd.conf
admin_space_left = 5%
If the value of the "admin_space_left" keyword is not set to 5 percent of the storage volume allocated to audit logs, or if the line is commented out, ask the system administrator (SA) to indicate how the system is taking action if the allocated storage is about to reach capacity. If the "space_left" value is not configured to the correct value, this is a finding.
STIG ID: ALMA-09-053370 | SRG: SRG-OS-000343-GPOS-00134 | Severity: medium | CCI: | Vulnerability Id: V-269520
If security personnel are not notified immediately when storage volume reaches 75 percent usage, they are unable to plan for audit record storage capacity expansion.
Configure the "auditd" service to take action in the event of allocated audit record storage volume reaches 95 percent of the repository maximum audit record storage capacity.
Edit the following line in "/etc/audit/auditd.conf" to ensure that the system is forced into single user mode in the event the audit record storage volume is about to reach maximum capacity:
admin_space_left_action = single
The audit daemon must be restarted for changes to take effect.
Verify that AlmaLinux OS 9 is configured to take action in the event of allocated audit record storage volume reaches 95 percent of the repository maximum audit record storage capacity with the following command:
$ grep admin_space_left_action /etc/audit/auditd.conf
admin_space_left_action = single
If the value of the "admin_space_left_action" is not set to "single", or if the line is commented out, ask the system administrator (SA) to indicate how the system is providing real-time alerts to the SA and information system security officer (ISSO).
If there is no evidence that real-time alerts are configured on the system, this is a finding.
STIG ID: ALMA-09-053480 | SRG: SRG-OS-000343-GPOS-00134 | Severity: medium | CCI: | Vulnerability Id: V-269521
If security personnel are not notified immediately when storage volume reaches 75 percent usage, they are unable to plan for audit record storage capacity expansion.
Configure AlmaLinux OS 9 to initiate an action to notify the SA and ISSO (at a minimum) when allocated audit record storage volume reaches 75 percent of the repository maximum audit record storage capacity by adding/modifying the following line in the /etc/audit/auditd.conf file.
space_left = 25%
Verify AlmaLinux OS 9 takes action when allocated audit record storage volume reaches 75 percent of the repository maximum audit record storage capacity with the following command:
$ grep -w space_left /etc/audit/auditd.conf
space_left = 25%
If the value of the "space_left" keyword is not set to 25 percent of the storage volume allocated to audit logs, or if the line is commented out, ask the system administrator (SA) to indicate how the system is providing real-time alerts to the SA and information system security officer (ISSO). If the "space_left" value is not configured to the correct value, this is a finding.
STIG ID: ALMA-09-053590 | SRG: SRG-OS-000343-GPOS-00134 | Severity: medium | CCI: | Vulnerability Id: V-269522
If security personnel are not notified immediately when storage volume reaches 75 percent usage, they are unable to plan for audit record storage capacity expansion.
Configure AlmaLinux OS 9 to initiate an action to notify the SA and ISSO (at a minimum) when allocated audit record storage volume reaches 75 percent of the repository maximum audit record storage capacity by adding/modifying the following line in the /etc/audit/auditd.conf file.
space_left_action = email
Verify AlmaLinux OS 9 notifies the SA and ISSO (at a minimum) when allocated audit record storage volume reaches 75 percent of the repository maximum audit record storage capacity with the following command:
$ grep -w space_left_action /etc/audit/auditd.conf
space_left_action = email
If the value of the "space_left_action" is not set to "email", or if the line is commented out, ask the SA to indicate how the system is providing real-time alerts to the SA and ISSO.
If there is no evidence that real-time alerts are configured on the system, this is a finding.
STIG ID: ALMA-09-053810 | SRG: SRG-OS-000046-GPOS-00022 | Severity: medium | CCI: | Vulnerability Id: V-269523
It is critical for the appropriate personnel to be aware if a system is at risk of failing to process audit logs as required. Without this notification, the security personnel may be unaware of an impending failure of the audit capability, and system operation may be adversely affected.
Audit processing failures include software/hardware errors, failures in the audit capturing mechanisms, and audit storage capacity being reached or exceeded.
This requirement applies to each audit data storage repository (i.e., distinct information system component where audit records are stored), the centralized audit storage capacity of organizations (i.e., all audit data storage repositories combined), or both.
Configure the "auditd" service to notify the SA and ISSO in the event of an audit processing failure.
Edit the following line in "/etc/audit/auditd.conf" to ensure that administrators are notified via email for those situations:
action_mail_acct = root
Verify that AlmaLinux OS 9 is configured to notify the SA and/or ISSO (at a minimum) in the event of an audit processing failure with the following command:
$ grep action_mail_acct /etc/audit/auditd.conf
action_mail_acct = root
If the value of the "action_mail_acct" keyword is not set to "root" and/or other accounts for security personnel, the "action_mail_acct" keyword is missing, or the retuned line is commented out, ask the SA to indicate how they and the ISSO are notified of an audit process failure (e.g. using syslog). If there is no evidence of the proper personnel being notified of an audit processing failure, this is a finding.
STIG ID: ALMA-09-053920 | SRG: SRG-OS-000046-GPOS-00022 | Severity: medium | CCI: | Vulnerability Id: V-269524
It is critical for the appropriate personnel to be aware if a system is at risk of failing to process audit logs as required. Without this notification, the security personnel may be unaware of an impending failure of the audit capability, and system operation may be adversely affected.
Audit processing failures include software/hardware errors, failures in the audit capturing mechanisms, and audit storage capacity being reached or exceeded.
This requirement applies to each audit data storage repository (i.e., distinct information system component where audit records are stored), the centralized audit storage capacity of organizations (i.e., all audit data storage repositories combined), or both.
Edit the aliases map file (by default /etc/aliases) used by Postfix and configure a root alias (using the user isso as an example):
root: isso
Update the aliases database with the command:
$ newaliases
Note: If postfix is not installed or used to send email remotely, then this requirement is Not Applicable.
Verify that AlmaLinux OS 9 is configured to notify the appropriate interactive users in the event of an audit processing failure.
Find the alias maps that are being used with the following command:
$ postconf alias_maps
alias_maps = hash:/etc/aliases
Query the Postfix alias maps for an alias for the root user with the following command:
$ postmap -q root hash:/etc/aliases
isso
If an alias is not set, this is a finding.
STIG ID: ALMA-09-054030 | SRG: SRG-OS-000047-GPOS-00023 | Severity: medium | CCI: | Vulnerability Id: V-269525
It is critical that when the operating system is at risk of failing to process audit logs as required, it takes action to mitigate the failure. Audit processing failures include software/hardware errors; failures in the audit capturing mechanisms; and audit storage capacity being reached or exceeded. Responses to audit failure depend upon the nature of the failure mode.
When availability is an overriding concern, other approved actions in response to an audit failure are as follows:
1) If the failure was caused by the lack of audit record storage capacity, the operating system must continue generating audit records if possible (automatically restarting the audit service if necessary), overwriting the oldest audit records in a first-in-first-out manner.
2) If audit records are sent to a centralized collection server and communication with this server is lost or the server fails, the operating system must queue audit records locally until communication is restored or until the audit records are retrieved manually. Upon restoration of the connection to the centralized collection server, action should be taken to synchronize the local audit data with the collection server.
Configure AlmaLinux OS 9 to shut down by default upon audit failure (unless availability is an overriding concern).
Add or update the following line ("disk_error_action" can be set to "HALT" or "SINGLE" depending on configuration) in the "/etc/audit/auditd.conf" file:
disk_error_action = HALT
If availability has been determined to be more important, and this decision is documented with the information system security officer (ISSO), configure AlmaLinux OS 9 to notify system administration staff and ISSO staff in the event of an audit processing failure by setting the "disk_error_action" to "SYSLOG".
Verify that AlmaLinux OS 9 takes the appropriate action when an audit processing failure occurs due to a disk error, with the following command:
$ grep disk_error_action /etc/audit/auditd.conf
disk_error_action = HALT
If the value of the "disk_error_action" option is not "SYSLOG", "SINGLE", or "HALT", is commented out, or is missing, this is a finding.
STIG ID: ALMA-09-054140 | SRG: SRG-OS-000047-GPOS-00023 | Severity: medium | CCI: | Vulnerability Id: V-269526
It is critical that when the operating system is at risk of failing to process audit logs as required, it takes action to mitigate the failure. Audit processing failures include software/hardware errors; failures in the audit capturing mechanisms; and audit storage capacity being reached or exceeded. Responses to audit failure depend upon the nature of the failure mode.
When availability is an overriding concern, other approved actions in response to an audit failure are as follows:
1) If the failure was caused by the lack of audit record storage capacity, the operating system must continue generating audit records if possible (automatically restarting the audit service if necessary), overwriting the oldest audit records in a first-in-first-out manner.
2) If audit records are sent to a centralized collection server and communication with this server is lost or the server fails, the operating system must queue audit records locally until communication is restored or until the audit records are retrieved manually. Upon restoration of the connection to the centralized collection server, action should be taken to synchronize the local audit data with the collection server.
Configure AlmaLinux OS 9 to shut down by default upon audit failure (unless availability is an overriding concern).
Add or update the following line ("disk_full_action" can be set to "HALT" or "SINGLE" depending on configuration) in the "/etc/audit/auditd.conf" file:
disk_full_action = HALT
If availability has been determined to be more important, and this decision is documented with the information system security officer (ISSO), configure AlmaLinux OS 9 to notify system administration staff and ISSO staff in the event of an audit processing failure by setting the "disk_full_action" to "SYSLOG".
Verify that AlmaLinux OS 9 takes the appropriate action when the audit storage volume is full, with the following command:
$ grep disk_full_action /etc/audit/auditd.conf
disk_full_action = HALT
If the value of the "disk_full_action" option is not "SYSLOG", "SINGLE", or "HALT", is commented out, or is missing, this is a finding.
STIG ID: ALMA-09-054250 | SRG: SRG-OS-000047-GPOS-00023 | Severity: medium | CCI: | Vulnerability Id: V-269527
It is critical that when the operating system is at risk of failing to process audit logs as required, it takes action to mitigate the failure. Audit processing failures include software/hardware errors; failures in the audit capturing mechanisms; and audit storage capacity being reached or exceeded. Responses to audit failure depend upon the nature of the failure mode.
When availability is an overriding concern, other approved actions in response to an audit failure are as follows:
1) If the failure was caused by the lack of audit record storage capacity, the operating system must continue generating audit records if possible (automatically restarting the audit service if necessary), overwriting the oldest audit records in a first-in-first-out manner.
2) If audit records are sent to a centralized collection server and communication with this server is lost or the server fails, the operating system must queue audit records locally until communication is restored or until the audit records are retrieved manually. Upon restoration of the connection to the centralized collection server, action should be taken to synchronize the local audit data with the collection server.
Configure AlmaLinux OS 9 to halt the system when auditing failures occur.
Add the following line to the /etc/audit/audit.rules file:
-f 2
Reload the audit rules with the following command:
auditctl -R /etc/audit/audit.rules
Verify the auditd service is configured to panic on a critical error with the following command:
$ auditctl -s
failure 2
A number of parameters will display. If the value for "failure" is not "2", and availability is not documented as an overriding concern, this is a finding.
STIG ID: ALMA-09-054360 | SRG: SRG-OS-000047-GPOS-00023 | Severity: medium | CCI: | Vulnerability Id: V-269528
max_log_file (size in megabytes) multiplied by num_logs must make full use of the auditd storage volume (separate to the root partition).
If max_log_file_action is set to ROTATE or KEEP_LOGS then max_log_file must be set to a value that makes the most use of the storage available.
Configure AlmaLinux OS 9 to make full use of the auditd storage volume with rotation enabled.
Add or update the following line in the "/etc/audit/auditd.conf" file to a value large enough to make efficient use of the auditd storage volume:
max_log_file = 100
Verify that AlmaLinux OS 9 is configured to make full use of the auditd storage volume when rotation is enabled, with the following command:
$ grep max_log_file /etc/audit/auditd.conf
max_log_file = 8
If the value of the "max_log_file" option is not sufficiently large to maximize the use of the storage volume, is commented out, or is missing, this is a finding.
STIG ID: ALMA-09-054470 | SRG: SRG-OS-000047-GPOS-00023 | Severity: medium | CCI: | Vulnerability Id: V-269529
It is critical that when the operating system is at risk of failing to process audit logs as required, it takes action to mitigate the failure. Audit processing failures include software/hardware errors; failures in the audit capturing mechanisms; and audit storage capacity being reached or exceeded. Responses to audit failure depend upon the nature of the failure mode.
When availability is an overriding concern, other approved actions in response to an audit failure are as follows:
1) If the failure was caused by the lack of audit record storage capacity, the operating system must continue generating audit records if possible (automatically restarting the audit service if necessary), overwriting the oldest audit records in a first-in-first-out manner.
2) If audit records are sent to a centralized collection server and communication with this server is lost or the server fails, the operating system must queue audit records locally until communication is restored or until the audit records are retrieved manually. Upon restoration of the connection to the centralized collection server, action should be taken to synchronize the local audit data with the collection server.
Configure AlmaLinux OS 9 to rotate the audit log when it reaches maximum size.
Add or update the following line ("max_log_file_action" can be set to "ROTATE" or "KEEP_LOGS" depending on configuration) in the "/etc/audit/auditd.conf" file:
max_log_file_action = ROTATE
Verify that AlmaLinux OS 9 takes the appropriate action when the audit files have reached maximum size, with the following command:
$ grep max_log_file_action /etc/audit/auditd.conf
max_log_file_action = ROTATE
If the value of the "max_log_file_action" option is not "ROTATE", "KEEP_LOGS", is commented out, or is missing, this is a finding.
STIG ID: ALMA-09-054580 | SRG: SRG-OS-000047-GPOS-00023 | Severity: medium | CCI: | Vulnerability Id: V-269530
max_log_file (size in megabytes) multiplied by num_logs must make full use of the auditd storage volume (separate to the root partition).
If max_log_file_action is set to ROTATE or KEEP_LOGS then num_logs must be set to a value between 2 and 99.
Configure AlmaLinux OS 9 to make full use of the auditd storage volume with rotation enabled.
Add or update the following line ("num_logs" can be set to a number between 2 and 99) in the "/etc/audit/auditd.conf" file:
num_logs = 5
Verify that AlmaLinux OS 9 is configured to make full use of the auditd storage volume when rotation is enabled, with the following command:
$ grep num_logs /etc/audit/auditd.conf
num_logs = 5
If the value of the "num_logs" option is not between 2 and 99, is commented out, or is missing, this is a finding.
STIG ID: ALMA-09-054690 | SRG: SRG-OS-000051-GPOS-00024 | Severity: medium | CCI: | Vulnerability Id: V-269531
If option "freq" is not set to a value that requires audit records being written to disk after a threshold number is reached, then audit records may be lost.
Configure AlmaLinux OS 9 to flush audit to disk by adding or updating the following rule in "/etc/audit/auditd.conf":
freq = 100
The audit daemon must be restarted for the changes to take effect.
Verify that audit system is configured to flush to disk after every 100 records with the following command:
$ grep freq /etc/audit/auditd.conf
freq = 100
If "freq" is not set to a value between "1" and "100", the value is missing, or the line is commented out, this is a finding.
STIG ID: ALMA-09-054910 | SRG: SRG-OS-000042-GPOS-00021 | Severity: medium | CCI: | Vulnerability Id: V-269532
Without establishing what type of events occurred, the source of events, where events occurred, and the outcome of events, it would be difficult to establish, correlate, and investigate the events leading up to an outage or attack.
Audit record content that may be necessary to satisfy this requirement includes, for example, time stamps, source and destination addresses, user/process identifiers, event descriptions, success/fail indications, filenames involved, and access control or flow control rules invoked.
Associating event types with detected events in audit logs provides a means of investigating an attack, recognizing resource usage or capacity thresholds, or identifying an improperly configured AlmaLinux OS 9 system.
Satisfies: SRG-OS-000042-GPOS-00021, SRG-OS-000051-GPOS-00024, SRG-OS-000392-GPOS-00172, SRG-OS-000122-GPOS-00063, SRG-OS-000473-GPOS-00218, SRG-OS-000472-GPOS-00217, SRG-OS-000474-GPOS-00219, SRG-OS-000365-GPOS-00152, SRG-OS-000358-GPOS-00145, SRG-OS-000348-GPOS-00136, SRG-OS-000349-GPOS-00137, SRG-OS-000350-GPOS-00138, SRG-OS-000351-GPOS-00139, SRG-OS-000352-GPOS-00140, SRG-OS-000353-GPOS-00141, SRG-OS-000354-GPOS-00142, SRG-OS-000337-GPOS-00129, SRG-OS-000062-GPOS-00031, SRG-OS-000054-GPOS-00025
To enable the auditd service run the following command:
$ systemctl enable --now auditd
Verify that the auditd service is enabled with the following command:
$ systemctl status auditd.service
auditd.service - Security Auditing Service
Loaded: loaded (/usr/lib/systemd/system/auditd.service; enabled; preset: enabled)
Active: active (running) since Fri 2024-01-05 14:04:30 UTC; 10min ago
If the audit service is not "active" and "running", this is a finding.
STIG ID: ALMA-09-055130 | SRG: SRG-OS-000355-GPOS-00143 | Severity: medium | CCI: | Vulnerability Id: V-269533
Inaccurate time stamps make it more difficult to correlate events and can lead to an inaccurate analysis. Determining the correct time a particular event occurred on a system is critical when conducting forensic analysis and investigating system events. Sources outside the configured acceptable allowance (drift) may be inaccurate.
Synchronizing internal information system clocks provides uniformity of time stamps for information systems with multiple system clocks and systems connected over a network.
Organizations should consider endpoints that may not have regular access to the authoritative time server (e.g., mobile, teleworking, and tactical endpoints).
Satisfies: SRG-OS-000355-GPOS-00143, SRG-OS-000359-GPOS-00146
To enable the chronyd service run the following command:
$ systemctl enable --now chronyd
Verify the chronyd service is active with the following command:
$ systemctl is-active chronyd
active
If the chronyd service is not active, this is a finding.
STIG ID: ALMA-09-055240 | SRG: SRG-OS-000355-GPOS-00143 | Severity: medium | CCI: | Vulnerability Id: V-269534
Inaccurate time stamps make it more difficult to correlate events and can lead to an inaccurate analysis. Determining the correct time a particular event occurred on a system is critical when conducting forensic analysis and investigating system events. Sources outside the configured acceptable allowance (drift) may be inaccurate.
Synchronizing internal information system clocks provides uniformity of time stamps for information systems with multiple system clocks and systems connected over a network.
Organizations should consider endpoints that may not have regular access to the authoritative time server (e.g., mobile, teleworking, and tactical endpoints).
Satisfies: SRG-OS-000355-GPOS-00143, SRG-OS-000359-GPOS-00146
The chrony package can be installed with the following command:
$ dnf install chrony
Verify that AlmaLinux OS 9 has the chrony package installed with the following command:
$ dnf list --installed chrony
Installed Packages
chrony.x86_64 4.3-1.el9 @anaconda
If the "chrony" package is not installed, this is a finding.
STIG ID: ALMA-09-055350 | SRG: SRG-OS-000356-GPOS-00144 | Severity: medium | CCI: | Vulnerability Id: V-269535
Inaccurate time stamps make it more difficult to correlate events and can lead to an inaccurate analysis. Determining the correct time a particular event occurred on a system is critical when conducting forensic analysis and investigating system events.
Synchronizing internal information system clocks provides uniformity of time stamps for information systems with multiple system clocks and systems connected over a network. Organizations should consider setting time periods for different types of systems (e.g., financial, legal, or mission-critical systems).
Organizations should also consider endpoints that may not have regular access to the authoritative time server (e.g., mobile, teleworking, and tactical endpoints). This requirement is related to the comparison done every 24 hours in SRG-OS-000355 because a comparison must be done to determine the time difference.
Satisfies: SRG-OS-000356-GPOS-00144, SRG-OS-000359-GPOS-00146, SRG-OS-000785-GPOS-00250
Configure AlmaLinux OS 9 to securely compare internal information system clocks at least every 24 hours with an NTP server by adding/modifying the following line in the /etc/chrony.conf file.
server
Verify AlmaLinux OS 9 is securely comparing internal information system clocks at least every 24 hours with an NTP server with the following commands:
$ grep maxpoll /etc/chrony.conf
server 0.us.pool.ntp.mil iburst maxpoll 16
If the "maxpoll" option is set to a number greater than 16 or the line is commented out, this is a finding.
Verify the "chrony.conf" file is configured to an authoritative DOD time source by running the following command:
$ grep -i server /etc/chrony.conf
server 0.us.pool.ntp.mil
If the parameter "server" is not set or is not set to an authoritative DOD time source, this is a finding.
STIG ID: ALMA-09-055680 | SRG: SRG-OS-000057-GPOS-00027 | Severity: medium | CCI: | Vulnerability Id: V-269536
Unauthorized disclosure of audit records can reveal system and configuration data to attackers, thus compromising its confidentiality.
Audit information includes all information (e.g., audit records, audit settings, audit reports) needed to successfully audit operating system activity.
Satisfies: SRG-OS-000057-GPOS-00027, SRG-OS-000059-GPOS-00029
Change the audit directory to be owned by the root user and group:
$ chown root:root /var/log/audit
Verify the audit log directory is owned by "root".
First determine where the audit logs are stored with the following command:
$ grep -w log_file /etc/audit/auditd.conf
log_file = /var/log/audit/audit.log
Then using the location of the audit log file, determine if the audit log is owned by the "root" user and group using the following command:
$ stat -c "%U:%G %n" /var/log/audit
root:root /var/log/audit
If the audit log directory is not owned by "root:root", this is a finding.
STIG ID: ALMA-09-055790 | SRG: SRG-OS-000057-GPOS-00027 | Severity: medium | CCI: | Vulnerability Id: V-269537
Unauthorized disclosure of audit records can reveal system and configuration data to attackers, thus compromising its confidentiality.
Audit information includes all information (e.g., audit records, audit settings, audit reports) needed to successfully audit operating system activity.
Satisfies: SRG-OS-000057-GPOS-00027, SRG-OS-000059-GPOS-00029
Change the audit directory to have 0700 permissions:
$ chmod 0700 /var/log/audit
Verify the audit log directory has 0700 (u=rwx) permissions.
First determine where the audit logs are stored with the following command:
$ grep -w log_file /etc/audit/auditd.conf
log_file = /var/log/audit/audit.log
Then using the location of the audit log file, determine if the audit log directory has 0700 permissions using the following command:
$ stat -c "%U:%G %#a %n" /var/log/audit
root:root 0700 /var/log/audit
If the audit log directory does not have 0700 permissions, this is a finding.
STIG ID: ALMA-09-055900 | SRG: SRG-OS-000057-GPOS-00027 | Severity: medium | CCI: | Vulnerability Id: V-269538
Unauthorized disclosure of audit records can reveal system and configuration data to attackers, thus compromising its confidentiality.
Audit information includes all information (e.g., audit records, audit settings, audit reports) needed to successfully audit operating system activity.
Satisfies: SRG-OS-000057-GPOS-00027, SRG-OS-000059-GPOS-00029
Change the audit logs to be owned by the root group:
$ chgrp root /var/log/audit/audit.log
Then set the group to root in /etc/audit/auditd.conf by adding or updating the following line:
log_group = root
Verify the audit logs are owned by the "root" group.
First determine if a group other than "root" has been assigned to the audit logs with the following command:
$ grep log_group /etc/audit/auditd.conf
log_group = root
Then determine where the audit logs are stored with the following command:
$ grep -w log_file /etc/audit/auditd.conf
log_file = /var/log/audit/audit.log
Then using the location of the audit log file, determine if the audit log is owned by the "root" group using the following command:
$ stat -c "%G" /var/log/audit/audit.log
root
If the audit log is not owned by the "root" group, or log_group is not set to "root", this is a finding.
STIG ID: ALMA-09-056010 | SRG: SRG-OS-000057-GPOS-00027 | Severity: medium | CCI: | Vulnerability Id: V-269539
Unauthorized disclosure of audit records can reveal system and configuration data to attackers, thus compromising its confidentiality.
Audit information includes all information (e.g., audit records, audit settings, audit reports) needed to successfully audit operating system activity.
Satisfies: SRG-OS-000057-GPOS-00027, SRG-OS-000059-GPOS-00029
Change the audit logs to be owned by the root user:
$ chown root /var/log/audit/*
Verify the audit logs are owned by the "root" user.
First determine where the audit logs are stored with the following command:
$ grep -w log_file /etc/audit/auditd.conf
log_file = /var/log/audit/audit.log
Then using the location of the audit log file, determine if the audit log is owned by the "root" user using the following command:
$ stat -c "%U" /var/log/audit/audit.log
root
If the audit log is not owned by the "root" user this is a finding.
STIG ID: ALMA-09-056120 | SRG: SRG-OS-000057-GPOS-00027 | Severity: medium | CCI: | Vulnerability Id: V-269540
Unauthorized disclosure of audit records can reveal system and configuration data to attackers, thus compromising its confidentiality.
Audit information includes all information (e.g., audit records, audit settings, audit reports) needed to successfully audit operating system activity.
Satisfies: SRG-OS-000057-GPOS-00027, SRG-OS-000059-GPOS-00029
Change the audit logs to have 0600 permissions:
$ chmod 0600 /var/log/audit/*
Verify the audit log files have 0600 (u=rw-) permissions.
First determine where the audit logs are stored with the following command:
$ grep -w log_file /etc/audit/auditd.conf
log_file = /var/log/audit/audit.log
Then using the location of the audit log file, determine if the audit logs have 0600 permissions using the following command:
$ stat -c "%U:%G %#a %n" /var/log/audit/*
root:root 0600 /var/log/audit/audit.log
If the audit log files do not have 0600 permissions, this is a finding.
STIG ID: ALMA-09-056230 | SRG: SRG-OS-000256-GPOS-00097 | Severity: medium | CCI: | Vulnerability Id: V-269541
Protecting audit information also includes identifying and protecting the tools used to view and manipulate log data. Therefore, protecting audit tools is necessary to prevent unauthorized operation on audit information.
AlmaLinux OS 9 systems providing tools to interface with audit information will leverage user permissions and roles identifying the user accessing the tools, and the corresponding rights the user enjoys, to make access decisions regarding the access to audit tools.
Audit tools include, but are not limited to, vendor-provided and open source audit tools needed to successfully view and manipulate audit information system activity and records. Audit tools include custom queries and report generators.
Configure the audit tools to be group-owned by "root" by running the following command:
$ chgrp root [audit_tool]
Replace "[audit_tool]" with each audit tool not group-owned by "root".
Verify the audit tools are group owned by "root" with the following command:
$ stat -c "%G %n" /sbin/auditctl /sbin/aureport /sbin/ausearch /sbin/autrace /sbin/auditd /sbin/rsyslogd /sbin/augenrules
root /sbin/auditctl
root /sbin/aureport
root /sbin/ausearch
root /sbin/autrace
root /sbin/auditd
root /sbin/rsyslogd
root /sbin/augenrules
If any audit tools do not have a group owner of "root", this is a finding.
STIG ID: ALMA-09-056340 | SRG: SRG-OS-000256-GPOS-00097 | Severity: medium | CCI: | Vulnerability Id: V-269542
Protecting audit information also includes identifying and protecting the tools used to view and manipulate log data. Therefore, protecting audit tools is necessary to prevent unauthorized operation on audit information.
AlmaLinux OS 9 systems providing tools to interface with audit information will leverage user permissions and roles identifying the user accessing the tools, and the corresponding rights the user enjoys, to make access decisions regarding the access to audit tools.
Audit tools include, but are not limited to, vendor-provided and open source audit tools needed to successfully view and manipulate audit information system activity and records. Audit tools include custom queries and report generators.
Satisfies: SRG-OS-000256-GPOS-00097, SRG-OS-000258-GPOS-00099
Configure the audit tools to be owned by "root" by running the following command:
$ chown root [audit_tool]
Replace "[audit_tool]" with each audit tool not owned by "root".
Verify the audit tools are owned by "root" with the following command:
$ stat -c "%U %n" /sbin/auditctl /sbin/aureport /sbin/ausearch /sbin/autrace /sbin/auditd /sbin/rsyslogd /sbin/augenrules
root /sbin/auditctl
root /sbin/aureport
root /sbin/ausearch
root /sbin/autrace
root /sbin/auditd
root /sbin/rsyslogd
root /sbin/augenrules
If any audit tools do not have an owner of "root", this is a finding.
STIG ID: ALMA-09-056560 | SRG: SRG-OS-000256-GPOS-00097 | Severity: medium | CCI: | Vulnerability Id: V-269543
Protecting audit information also includes identifying and protecting the tools used to view and manipulate log data. Therefore, protecting audit tools is necessary to prevent unauthorized operation on audit information.
AlmaLinux OS 9 systems providing tools to interface with audit information will leverage user permissions and roles identifying the user accessing the tools, and the corresponding rights the user enjoys, to make access decisions regarding the access to audit tools.
Audit tools include, but are not limited to, vendor-provided and open source audit tools needed to successfully view and manipulate audit information system activity and records. Audit tools include custom queries and report generators.
Satisfies: SRG-OS-000256-GPOS-00097, SRG-OS-000258-GPOS-00099
Configure the audit tools to have a mode of "0755" by running the following command:
$ chmod 0755 [audit_tool]
Replace "[audit_tool]" with each audit tool that has a more permissive mode than 0755.
Verify the audit tools have a mode of "0755" or less with the following command:
$ stat -c "%#a %n" /sbin/auditctl /sbin/aureport /sbin/ausearch /sbin/autrace /sbin/auditd /sbin/rsyslogd /sbin/augenrules
0755 /sbin/auditctl
0755 /sbin/aureport
0755 /sbin/ausearch
0750 /sbin/autrace
0755 /sbin/auditd
0755 /sbin/rsyslogd
0755 /sbin/augenrules
If any of the audit tool files have a mode more permissive than "0755", this is a finding.
STIG ID: ALMA-09-056780 | SRG: SRG-OS-000058-GPOS-00028 | Severity: medium | CCI: | Vulnerability Id: V-269544
If modification of login user identifiers (UIDs) is not prevented, they can be changed by nonprivileged users and make auditing complicated or impossible.
Configure AlmaLinux OS 9 auditing to prevent modification of login UIDs once they are set by adding the following line to /etc/audit/rules.d/audit.rules:
--loginuid-immutable
Verify the audit system prevents unauthorized changes to logon UIDs with the following command:
$ grep immutable /etc/audit/audit.rules
--loginuid-immutable
If the "--loginuid-immutable" option is not returned in the "/etc/audit/audit.rules", or the line is commented out, this is a finding.
STIG ID: ALMA-09-056890 | SRG: SRG-OS-000278-GPOS-00108 | Severity: medium | CCI: | Vulnerability Id: V-269545
Protecting the integrity of the tools used for auditing purposes is a critical step toward ensuring the integrity of audit information. Audit information includes all information (e.g., audit records, audit settings, and audit reports) needed to successfully audit information system activity.
Satisfies: SRG-OS-000278-GPOS-00108, SRG-OS-000257-GPOS-00098
Add or update the following lines to "/etc/aide.conf", to protect the integrity of the audit tools:
/usr/sbin/auditctl p+i+n+u+g+s+b+acl+xattrs+sha512
/usr/sbin/auditd p+i+n+u+g+s+b+acl+xattrs+sha512
/usr/sbin/ausearch p+i+n+u+g+s+b+acl+xattrs+sha512
/usr/sbin/aureport p+i+n+u+g+s+b+acl+xattrs+sha512
/usr/sbin/autrace p+i+n+u+g+s+b+acl+xattrs+sha512
/usr/sbin/augenrules p+i+n+u+g+s+b+acl+xattrs+sha512
Check that AIDE is properly configured to use cryptographic mechanisms to protect the integrity of the audit tools with the following command:
$ grep /usr/sbin/au /etc/aide.conf
/usr/sbin/auditctl p+i+n+u+g+s+b+acl+xattrs+sha512
/usr/sbin/auditd p+i+n+u+g+s+b+acl+xattrs+sha512
/usr/sbin/ausearch p+i+n+u+g+s+b+acl+xattrs+sha512
/usr/sbin/aureport p+i+n+u+g+s+b+acl+xattrs+sha512
/usr/sbin/autrace p+i+n+u+g+s+b+acl+xattrs+sha512
/usr/sbin/augenrules p+i+n+u+g+s+b+acl+xattrs+sha512
If AIDE is not installed, ask the system administrator (SA) how file integrity checks are performed on the system.
If any of the audit tools listed above do not have a corresponding line including "sha512", ask the SA to indicate what cryptographic mechanisms are being used to protect the integrity of the audit tools. If there is no evidence of integrity protection, this is a finding.
STIG ID: ALMA-09-057110 | SRG: SRG-OS-000058-GPOS-00028 | Severity: medium | CCI: | Vulnerability Id: V-269546
Unauthorized disclosure of audit records can reveal system and configuration data to attackers, thus compromising its confidentiality.
Audit information includes all information (e.g., audit records, audit settings, audit reports) needed to successfully audit AlmaLinux OS 9 system activity.
In immutable mode, unauthorized users cannot execute changes to the audit system to potentially hide malicious activity and then put the audit rules back. A system reboot would be noticeable, and a system administrator could then investigate the unauthorized changes.
Configure the audit system to set the audit rules to be immutable by adding the following line to the end of "/etc/audit/rules.d/audit.rules"
-e 2
Verify the audit system prevents unauthorized changes to the rules with the following command:
$ grep -E '^-e 2' /etc/audit/audit.rules
-e 2
If the audit system is not set to be immutable by adding the "-e 2" option to the end of "/etc/audit/audit.rules", this is a finding.